TK1491 Posted November 29, 2009 Report Share Posted November 29, 2009 Well I had my first troop in my fantastic new troopersupplies TK boots, with one unforeseen issue. Unlike my Caboots, my new TK boots had a little problem. If i bent my knee forward enough, the back of the boot would force the shin pieces to ride up until **POP** out the back they came. Once that happened the shin piece was impossible to shove down and back over the boot tops. So...I devised this easy fix and it works like a charm. Onto the existing pull loops on the boot, I attached small D-rings. Attached to the d-rings I placed a short length of 1" elastic with a snap. Then I simply attached a snap to the inside of the shin in the right spot, and bam, problem solved. When I place the shin piece around my calf I simply reach in and snap the elastic strap. Now when I bend my knee forward the shin piece is gently held in check and the back of the boot never reaches the bottom edge of the shin piece. For whatever reason this never happened with my Caboots, probably because the leather is so darn nice and supple on my new boots. Hope this helps if anyone has the same issue (although I've never heard of this before!) Scott 1 Quote Link to comment Share on other sites More sharing options...
pandatrooper[TK] Posted November 29, 2009 Report Share Posted November 29, 2009 Nice fix, good idea! Quote Link to comment Share on other sites More sharing options...
firebladejedi[TK] Posted November 29, 2009 Report Share Posted November 29, 2009 I have never had this problem but that's a great solution Scott and a lot better than putting velcro on the front of the boots Quote Link to comment Share on other sites More sharing options...
TK5144[TK] Posted December 4, 2009 Report Share Posted December 4, 2009 That is an excellent idea. I don't have pics yet - but I added elastic to the shin piece in a U shaped "stirrup" that holds the piece down, with the U going under the foot, inside the boot. Quote Link to comment Share on other sites More sharing options...
Obievon[501st] Posted December 4, 2009 Report Share Posted December 4, 2009 That would solve the problem Thanks! Quote Link to comment Share on other sites More sharing options...
Arsey666 Posted April 14, 2013 Report Share Posted April 14, 2013 I have this problem too, this is a great idea cheers! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.