johnnymac Posted September 15, 2009 Report Share Posted September 15, 2009 Guys, I recently bought a green laser pointer for next to nothing on ebay and thought that it would be really cool to add it to a hasbro blaster. It is really simple and if you haven't already done something like this, it looks really cool. First off you need to solder a positive and negative wire to the inside of your laser pointer. You will also need to tape down or glue the button on the laser so that it is permanently pressed in. Then solder the positive red wire to the positive terminal in the blaster. Then drill a hole in the blaster where the fake plastic selector switch is. Install a momentary switch (push button on/off from Radio Shack) in the hole. You will also need to cut out a space for the button on the trigger. Then solder the negative wire from the laser to one terminal on the switch and solder a short wire from the neg terminal on the battery to the other side of the switch and voila. You now have a laser sight on your blaster. Quote Link to comment Share on other sites More sharing options...
Agent RayBans Posted September 15, 2009 Report Share Posted September 15, 2009 Neat! Maybe if the Stormies in the movies has Laser sights they would actually be able to hit something! Quote Link to comment Share on other sites More sharing options...
oiftanker Posted September 15, 2009 Report Share Posted September 15, 2009 those same buttons fit well in the holes on barrelll... i use mine to light up my scope thats from my build a while back Quote Link to comment Share on other sites More sharing options...
TK-2126_MD[TK] Posted September 15, 2009 Report Share Posted September 15, 2009 Hows the power useage in regards to the blaster electronics and the laser???? Quote Link to comment Share on other sites More sharing options...
TomaToNOR[501st] Posted September 15, 2009 Report Share Posted September 15, 2009 Just remember to keep that laser away from the eyes of on-lookers. It can deal alot of damage, even if it's a low-yield laser. Quote Link to comment Share on other sites More sharing options...
johnnymac Posted September 16, 2009 Author Report Share Posted September 16, 2009 Hows the power useage in regards to the blaster electronics and the laser???? It's all powered on the AA batteries that came with the blaster. I have only had it wired up for 2 days, but I haven't noticed any power loss. I'll let you know if it drains the batteries, but so far so good... I've already blinded the neighbors cat, 2 dogs and fixed the old lady across the streets cataracts. :-) 1 Quote Link to comment Share on other sites More sharing options...
oiftanker Posted September 16, 2009 Report Share Posted September 16, 2009 ok thats funny Quote Link to comment Share on other sites More sharing options...
LaserBrain99 Posted October 13, 2014 Report Share Posted October 13, 2014 Is it possible to wire the laser so that the laser turns on when you pull the trigger? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.