ForlornHope[501st] Posted July 18, 2009 Author Report Posted July 18, 2009 Well i finished painting the armor yesterday so now it has to sit and dry for a couple more days before i can assemble it. Most of it came out great except i had one noticable run on the chest of all places which perpexed me since it wasnt even on a vertical surface yet the legs which i painted completely vertical didnt run at all.. <_< . Hopefully the weathering will cover it up. I finished assembling the helmet finally. It still needs alot of suface prep to get old paint off and get it rdy for paint. Ive done quite a few mods so remember this use to be an ANH. Things ive done were as follows. -Clean up the mess of a bucket that it was before you will see alot of bondo in normal places liek the brow but in other places where holes and cracks has to be filled. The green is epoxy putty i used to filled the back of the wholes to provide a base for the bondo. Soo much sanding... - The clamped the helmet in a vice and squeezed it narrow while i heated it up all over with a heat gun to give it the pinched look. -I trimmed hte hears down alot to make them thinner and sit close to the bucket. - I filled the inside of the ears with plastic wood filler and drilled holes on the inde into the ear and i have about 4 screws on each ear going in from the inside to keep them firm and flush to the bucket since i cant use screws on the outside because ROTJ didnt have them. So here it is... hopefully ill have it painted this evening Quote
firebladejedi[TK] Posted July 18, 2009 Report Posted July 18, 2009 This is going to be a sweet build, nice going there buddy Quote
ForlornHope[501st] Posted July 19, 2009 Author Report Posted July 19, 2009 Some painting in progress pics. This is after the second coat of pro enamel. I did one more coat and now its sitting in the garage. Got a little dripping under the right tusk mostly out of sight and some rough patches where i didnt get enough paint under the vocoder but mostly stuff thta cant be seen very well and overall i think it came out good. Quote
TK-2126_MD[TK] Posted July 19, 2009 Report Posted July 19, 2009 GOOD LORD!!!!! Thats shiny..... weres my soldering mask!!!!! Dam!!!!!! Sorry man the shine is to much..... Quote
ThayNerd[TK] Posted July 19, 2009 Report Posted July 19, 2009 That's nice and glossy. Looking great! Quote
ForlornHope[501st] Posted July 21, 2009 Author Report Posted July 21, 2009 Just a quick update Ive finished painting the hard armor and its all dry. The edge trim was painted today and took many hours but its now sitting out to dry. Ill be doing most of the assembly tommorow as well as the helmet details. Should have my first armor fitting tommorow night hopefully Quote
ForlornHope[501st] Posted July 22, 2009 Author Report Posted July 22, 2009 Update time. I wasnt able to assemble last night because my Urban planning professor decided to give us a test. However i hope to finish most of it today with a guarenteed finish date of tommorow in time for comic-con on friday. Some pics of the helmet soo far and the painted edge trim. Quote
ThayNerd[TK] Posted July 22, 2009 Report Posted July 22, 2009 Very cool, can't wait to see it in person at Comic Con! I'll be sporting ESB for Friday and Saturday. We're driving down tonight. My girlfriend and I just finished up the last few things on her Slave Leia! Quote
Turrican Posted July 22, 2009 Report Posted July 22, 2009 WOW.... normaly i don't like the RotJ Suits but this looks awesome. Very nice bulit. Be very interessted to see the complete finished suit on you. 10 of 10 Points!! Quote
Daetrin[Admin] Posted July 22, 2009 Report Posted July 22, 2009 Whoa - this is looking awesome! Quote
ForlornHope[501st] Posted July 23, 2009 Author Report Posted July 23, 2009 Thanks for the encouragement. Weathering is finished and everything is fitting right so far. List of things left to do tommorow. - Finish Strapping and velcro - Finish Belt and holster - Add foam pads to helmet and pieces that need it to prevent twisting or sliding - Make bubble lenses and glue them in along with hovi mics Expect a full shot of me in the suit tommorow evening! Quote
AJCG Posted July 23, 2009 Report Posted July 23, 2009 Very nice and inspiring project! It is looking A+ More pics please. Cheers A Quote
VacTrooper Posted July 28, 2009 Report Posted July 28, 2009 THIS IS KILLER!!! Awesome Job, VERY fast! Quote
ThayNerd[TK] Posted July 28, 2009 Report Posted July 28, 2009 Saw this in person at Comic Con! Great work on the suit Jonathan. Quote
nothingrecorded Posted July 28, 2009 Report Posted July 28, 2009 I am at a near loss for words on this, the edge trim looks great! I imagine that will also be a requirement for the TK Commander Elite Status. Quote
ThayNerd[TK] Posted July 28, 2009 Report Posted July 28, 2009 Here's a pic I found on flickr of Jonathan in his ROTJ armor. Quote
littledragon88[TK] Posted July 28, 2009 Report Posted July 28, 2009 Wow, it's nice! I love the look of the ROTJ-painted frown on a ANH/ESB helmet! It sure doesn't look any like the 'cute' puppy-face helmets in ROTJ..even more menacing than the ANH/ESB version IMO. Quote
Daetrin[Admin] Posted July 29, 2009 Report Posted July 29, 2009 Pix! I want pix OK, now I want more pix (greedy lil' bugger, aren't I?). That one is a nice teaser _ Quote
ForlornHope[501st] Posted July 29, 2009 Author Report Posted July 29, 2009 Wow the side angle really doesnt show the helmet for its true greatness. Sorry i havnt thrown up pics as i promised but it might be a little longer if you cant find the numerous number probably on the internet by now. I had some issues and some thoughts over the course of the con on the armor. First of all I never once was refered to directly as a ROTJ trooper unless it was brought up in conversation. I actually had 501st members ask if the armor was rubies (i know...) and was called a "disney trooper" Also had some troubles with the armor itself. The edge trim which was painted seperatly apparently lost its stick in the process and i lost a couple pieces during the con and whats left are falling off. The bondo on my abb plat got air in it somehow during the application process and has not cracked all the way around and is splitting off. SO i decided in the course of fixing these mistakes id repaint the armor to a Stormtrooper Commander. Ill have to switch back in the ANH handplates and convert the helmet to an ANH stunt. The armor in the force unleashed is ROTJ so that will remain the same. I will also be repainting the armor semi-gloss with the trim on instead of seperatly so it keeps its stick and isnt soo shiney. Quote
Turrican Posted July 29, 2009 Report Posted July 29, 2009 Oh not nice..that parts of your armor fall of and that you have a lot to repair. Quote
nothingrecorded Posted July 29, 2009 Report Posted July 29, 2009 First of all I never once was refered to directly as a ROTJ trooper unless it was brought up in conversation. I actually had 501st members ask if the armor was rubies (i know...) and was called a "disney trooper" Also had some troubles with the armor itself. The edge trim which was painted seperatly apparently lost its stick in the process and i lost a couple pieces during the con and whats left are falling off. The bondo on my abb plat got air in it somehow during the application process and has not cracked all the way around and is splitting off. SO i decided in the course of fixing these mistakes id repaint the armor to a Stormtrooper Commander. Ill have to switch back in the ANH handplates and convert the helmet to an ANH stunt. The armor in the force unleashed is ROTJ so that will remain the same. I will also be repainting the armor semi-gloss with the trim on instead of seperatly so it keeps its stick and isnt soo shiney. Ouch! What a very unpleasant list of problems. The most insulting is being questioned as a Rubies suit! Personally I think you did an amazing job on this and it saddens me to hear it wasn't the greatest public debut. In regards to converting it to the TK Commander, I am very excited to watch you progress every step of the way! Good luck : ) Quote
littledragon88[TK] Posted July 30, 2009 Report Posted July 30, 2009 Sorry to hear about all the problems! Because I thought your ROTJ suit was great! One day, when I got the funds, I am definately going to go ROTJ, I am confinced after seeing your suit!!! Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.