TK-19525 Requesting ANH Stunt EIB Status [RWA]

[Tall_Trooper[TK]]

Name : Torben
ID : TK-19525
FISD Forum Name : Tall_Trooper
Garrison : German Garrison

 

501st Link : https://www.501st.com/members/displaymemberdetails.php?userID=36777

Social Media Consent : Yes

Height : 195cm
Weight : 78kg

 

Armor : RWA
Helmet : RWA
Blaster : unknown
Boots : Keeptrooping
Belt : RWA
Hand plates : ArtneoES

A big thank you to @Morgi and @Ripper_L who helped me with the photos and also took them

--Full Body--
 

 

--Amor Details--

 

 

 

 

--Helmet--
 

 

 

--Accessories--

 

--Blaster--

[gmrhodes13[Staff]]

Nice work trooper, you may want to remove a little paint on/close to the gums before the DO's get here, tooth pick with mineral turps can be helpful

 

For Basic approval and above, Frown is painted gray and does not leave the teeth area.  Eight total teeth on the frown are cut out.

                                                                              

 

 

 

Good luck with your application

[Tall_Trooper[TK]]

vor einer Stunde schrieb gmrhodes13:

Nice work trooper, you may want to remove a little paint on/close to the gums before the DO's get here, tooth pick with mineral turps can be helpful

 

 

Thanks!
I just did some research. It is apparently very difficult to get mineral turps in Germany. Just Turps replacement stuff.
Do you have another idea?

Edited Tuesday at 10:13 PM by Tall_Trooper

[gmrhodes13[Staff]]

1 minute ago, Tall_Trooper said:

Thanks!
I just did a lot of research. It is apparently very difficult to get mineral turps in Germany.Just Turps replacement stuff.
Do you have another idea?

Just using the tooth pick or other sharp implement, scrap plastic cut on an angle, can be enough. Definitely NO THINNERS, as it can melt the plastic. Cutting polish may also be an option, a little harder to control though.

 

Also noticed it appears you are missing the cocking lever (charging handle) off your blaster, although not mentioned in the CRL it is a requirement

 

 

 

 

A few options, if you have (or know anyone with) a 3D printer you could print one, some great files here 

 

Or if you have old skool talents (hands on building) you could make one, I have used a plastic paint brush handle, shape and apply a little heat

Or you may be able to purchase one from one of the blaster suppliers

 

Reference:

[Tall_Trooper[TK]]

Okay, this is going better than I thought
I fixed the frown. Also I realized that I picked up the wrong blaster.
Here is my "real blaster":

I hope it's better this way. But thank you very much for the help

Edited Tuesday at 11:08 PM by Tall_Trooper

[gmrhodes13[Staff]]

23 minutes ago, Tall_Trooper said:

I hope it's better this way. But thank you very much for the help

[JBar[TK]]

Good luck trooper! Quick fixes on the blaster and frown