Jump to content

G'day there - new TK recruit from down under


Recommended Posts

G'day all - long-time lurker, first time poster (so I made it a doosie).

 

I thought I should introduce myself and thank the collective group for some amazing build threads and tips/tricks that I've learnt here.

 

Some background - Chris from Melbourne, Australia - As a kid, I asked Santa for Stormtrooper armour EVERY.SINGLE.CHRISTMAS, but he never came through. At 39 years of age, I gave up on my hopes (and belief in Santa ) and took matters into my own hands.

 

I saw what looked too good to be true on Facebook Marketplace (Spoiler Alert: It was) - an unfinished TK Kit with boots, undersuit, gloves, neck seal, etc for $100! I jumped on it. I didn't have any knowledge of FISD and little awareness of my local 501st (Knightfall) Garrison - though I'd has some brief discussions with some members at various events over the years.

 

To my initial disappointment, it was pointed out that my bargain kit was an FX recast and was unlikely to get approved. I felt like this slammed the door on my dream, but it introduced me to a terrific group of people who have blown me away with their support, encouragement and assistance to continue my journey. On the plus side, for $100, I did get the boots in brand new condition, the undersuit and soft parts and I have a spare set of armour. I’m trying to decide if I leave this on a mannequin or cut it down for my 9 year old son. 9 year old me would have killed for that, so I’m very tempted to oblige, but I’m also seeing how fast he’s growing, so focusing on getting my kit finished and approved first, then see how we go.

3pXKaWy.jpg

 

What I am hoping for is your feedback and any tips you can provide prior to submitting my ANH Stunt kit for approval. I’m stuck waiting for a few final (replacement) pieces to be delivered from the US, but hoping I don’t lose time once it arrives. I feel like I’m sooooo close, but want to make sure everything else is correct in the meantime. Any tips would be super helpful. EaiepWJ.jpg

 

I'm quite handy with most tools, but completely lacked the confidence to start from scratch, as ABS seemed so fragile to work with and mistakes would be EXPENSIVE. A local Knightfall Garrison member (Hi, BrenTK if you're reading) - lives locally to me and has been the experienced master to my clumsy Padawan. I can’t believe how generous he’s been with his time in guiding me through the build and how patient he’s been as I fumbled my way through. Now, as I near the (hopeful) end of my build, I feel like I could go again from the beginning and would fly through it. I’ve learnt so much and really enjoy seeing how well the components come together.

 

After my first misstep with the dodgy armour, I was pointed in the direction of another local member who had purchased a WTF TK kit several years earlier, but never had the time to complete it. A lot of the (very) rough trimming had been done at an armour party years earlier. Some trimming and painting had been done on the helmet, so that did speed up the process somewhat. It did look pretty rough, as you can see from the photos below, so I was sceptical that the kit was salvageable, but I’ve been so impressed with what you can do with sandpaper, ajax and some orange cleaner. It’s mostly as good as new!

 

So – getting into the build itself, I laid everything out and did an inventory check – it was missing shoulder bells and two abs rivet/button covers for the belt. (DAMN!) More on this later in the thread.

 

Getting started: Cutting, shaving and sanding. Scrubbing lots of rough texta marks off the armour was fun. The original owner was about a lot shorter than me, so thankfully it hadn’t been trimmed anywhere that would have impacted it fitting me. I’ve also got a relatively big noggin, so thankfully the helmet fits…. Just. TMHM2jK.jpg N2pVM5m.jpg

 

Little by little, BrenTK helped me chip away at my kit. We got the helmet finished pretty quickly. I ordered some correct decal stickers from Trooperbay on Etsy as well as the mesh for behind the teeth. These arrived super quickly. I nervously applied the stickers and mesh and installed the lenses. I also got over confident with one of the ears and decided it’d be a great idea to trim that down quite hastily. They were originally super chunky and looked out of proportion. This was one of my bigger mistakes, but BrenTK was able to salvage the ears/save the day. When it comes to trimming, I've learnt how important 'little by little' is.

pQOVx1a.jpg

 

Once I got through all the trimming, gluing was the next obstacle. When I did my first joins (without adult supervision), I thought it was a piece of cake. I lined everything up, popped on my clamps and magnets and let it set. The next day I realised pieces do slide somewhat with all the fiddling and I ended up with a substandard, uneven shin join. Unfortunately it was the right shin, so no Sniper knee plate to save the day. As my confidence grew, I took the calculated risk to remove the cover strip, separating the sides, and re-glued. This time with tape ensure the join set correctly. I was heaps happier with the end result. z11PGEi.jpg bEl37pp.jpg o9OGba0.jpg

 

Same deal with my right forearm. Super chunky, but I do have big hands and skinny wrists/forearms, so it was a balancing act. I ended up separating, cutting down and regluing. Its a tight squeeze to get into, but looks much better. I've trimmed 99% of the return edges out. 

 

The top of the Sniper knee plate dug into my kneecap once it was assembled and I knew it’d be an ongoing problem when trooping. That also put a stress fracture/crack into the side of the plate itself. My armour mentor had the wise idea to insert some small square pieces of ABS to block it out slightly. This resolved the issue, but didn’t look great from above. I ended up filling around that to hide all the nastiness and I’m happy with the outcome and comfort.

 

I watched some tutorials from RS Prop masters and was surprised how fast (and borderline recklessly) they threw their kits together, yet still got a great result, mostly true to the original construction (funny how effortless it looks when you're an expert!). I did pick up some great tips there too (as well as here in some of your tutorials) and did as much as I could without bothering BrenTK too much.

 

Now, I’m sitting and waiting for WTF to make the last few pieces and ship them to Australia. I held off on ordering earlier, just in case I ruined any other pieces. Shipping to Australia is more than double the cost of parts themselves, so I’m not keen to make that a habit.

 

While I’m waiting, I’d love your feedback and advice and to mooch off your collective years of experience so that when the final pieces do arrive, I’m pretty much good to go and don’t have to waste the GML’s time with too many adjustments I can make ahead of submitting my kit for approval. Detailed pics to be uploaded shortly.

 

This is my first ever crack at any type of costume, but I definitely have the bug and can see why you’re all so passionate and set excellent standards. Basic approval is the short-term goal, but I would love to work towards achieving Centurion if that’s possible with this kit. If there’s anything else glaringly obvious, I’d appreciate the heads up. If more/better/different angle photos would help, please let me know.

 

I’ll do up a separate post about my second dodgy purchase – my 3D printed E-11 blaster, but am relatively surprised how well it came together in the end.

 

Thanks again – this looks to be an awesome, helpful and welcoming community and it’s helping fulfil a lifelong dream that Santa screwed me out of!

 

Cheers,

 

Chris

 

Edited by cnic_views
Link to comment
Share on other sites

OK - so here's the progress shot of my armour. I'd love your feedback and advice.

 

Disclaimers: I am waiting on replacement Shoulder Bells, ABS Belt Button Covers and a new Thigh Ammo Belt. I didn't paint the rivets on the thigh as it's going to be replaced soon enough. 

 

This is probably the first time I've had everything on at once. My wife doesn't know what to look out for to fix, so I didn't test her patience any more that was avoidable :smiley-sw013: 

 

My strapping still needs some adjusting. I haven't put the elastic straps on the incorrect shoulder bells, but this will help hold everything closer to the chest and in the correct position. 

 

I am rocking a Dad-bod, so couldn't get the torso as tight as I'd like, but Christmas was only a few months ago. Hopefully that will tighten up a little. 

 

V6zi4de.jpg

CylHtIV.jpg

snPTp5H.jpg

Y7xk4i0.jpg

TZ2ZDLS.jpg

 

I'll put up helmet close up pics in a separate post.

Link to comment
Share on other sites

Helmet pics. I still have a little work to do on the padding and need to install the fans. I ordered a super small Power Bank to insert into the helmet. It turned up and it was pretty big, so any links to more compact options would be awesome!

 

03mBYlp.jpg

IoCBu22.jpg

tzeQ0H1.jpg

ysGEe1E.jpg

3KK41WQ.jpg

lP8ydUq.jpg

 

There's a slight gap between the ears and the helmet that bugs me. I do have the spare set that I may attempt, but after I butchered the first one, I'm still pretty hesitant. Hopefully not a barrier to getting approved. 

Link to comment
Share on other sites

Hello and welcome to the forum from the West.

 

First off your GML (garrison membership liaison) has final say on your costume.

 

One thing that stands out is your bicep cover strips and raised ridges, generally we try to keep any front sizing as close to screen used, the raised ridges should be just outside the cover strips, yours have a big gap. Larger cover strips may be used on the rear to achieve a larger size if needed.

 

 

 

Back of shins should close outside over the inside, this is so the don't appear open from the sides, yours are opposite. Cold also rotate your detonator so the O can be seen

CylHtIV.jpg   66W22Oe.jpg?1   ENBGgGW.jpg?1  eXtIssr.jpg?2    NmHDNh8.png   

 

     Left                                        Right

 JcZR9SB.jpg?1  A6gr4vO.jpg?1 

 

Small ab plate could be trimmed flat, should not have excess material on sides. Large ab plate is missing a base, it's been overtrimmed. You could also apply some heat to the belt (hot water bath) to help it conform to your armor better, your arms will catch the belt as they are.

3KK41WQ(1).thumb.jpg.e41fc1b8fc87426b9f0455438f73c697.jpg

 LSuei4K.jpg?1   JViLwBX.jpg?1

 

Elastic on your bicep to forearm appears on the sides (right arm) should be on the inner top

V6zi4de.jpg.76df3a22f2593a9384365c505a90a66f.jpg

Right arm

gallery_12157_59_83175.thumb.jpg.e9088c0f58db638972ed546242591db3.jpg

 

You helmet sits a little high, could try reducing the padding. Detonator clips not completely down on belt. Shoulder elastic appears it may be a little loose, straps only just reaching the backplate. You may also want to add side shims to reduce the black seen between the abdomen and kidney (although this is for higher levels)

OPTIONAL Level two certification (if applicable):

  • Any gap between the abdomen and kidney armor is no more than 1/2" (12.5mm) wide.
    • Any shims used to achieve this effect are of a similar material and color as the abdomen and kidney armor. Shims fit flush and seams are allowed.

 

TZ2ZDLS.thumb.jpg.09b97cbb0b315e36d6592b3aed35da19.jpg

 

 

  • Like 2
Link to comment
Share on other sites

Also

Drop boxes should align with the end of the plastic belt section. Han snap not quite in the right spot.

Y7xk4i0.thumb.jpg.42e13ae50045293032fe25e125257176.jpg

 

zEWQjCO.jpg?1  lA0qpzp.jpg?1

 

Belt attachment points look wider than the holster straps, may just be the image though.

snPTp5H.thumb.jpg.42a7cbe75f4e961f818614126294c86c.jpg

 

Shoulder straps not central to backplate. Gap between backplate and kidney. Gap between kidney and posterior on left)

CylHtIV.thumb.jpg.2dd163bd9f5238708f452ecf6e64815a.jpg0y5NexF.jpg?1B3vL4VO.jpg?1tH6Jz08.jpg?1

 

White shoulder strap being pulled sideways, can happen, try doubling over the elastic so it holds a little tighter

3KK41WQ(2).thumb.jpg.1ee62051534708d9167363a8bd10c300.jpg

 

Most of these are just adjustments and some may be seen ok by GML so check with him/her/them/they

 

Good luck with approval, hope to see you in the ranks soon :salute:

 

  • Like 1
Link to comment
Share on other sites

Thanks so much for the fast reply, Glen. That's exactly the info I need and is incredibly helpful! I've been speaking a lot with our GML, but was trying not to bother him with every little thing until my kit is good to go. I'll have all of these fixed (hopefully) by the time my new parts arrive.

 

I have asked for a new ab plate to be made by WTF. That was one of the first things I felt comfortable trimming/sanding and of course I did it wrong! haha. 

 

Great tip about the belt and using the hot water - I had meant to ask that, but forgot. Great solution! I'll move those ammo boxes too.

 

Shin cover plates - will do. Elastics - easy, thanks! The bicep cover strip is a bit of a headache. The left is insanely tight - I'm not exactly a bodybuilder, but can barely get my arm in it. I'll see what I can do to reduce that gap. 

 

I'll adjust the TD clips and see if I can rotate that. My wife clipped that on and had no idea what I was asking of her. I'll tighten up those elastics on the shoulder bridges. 

 

I only have a tiny thin piece of padding inside the top of the helmet. My head is pretty big and I do have a relatively long neck, so that might be harder to fix. I can see perfectly out of the lenses, but will see if it looks better with no padding - just less comfortable. 

 

Again - really appreciate the feedback and advice! 

  • Like 1
Link to comment
Share on other sites

1 hour ago, cnic_views said:

The bicep cover strip is a bit of a headache. The left is insanely tight - I'm not exactly a bodybuilder, but can barely get my arm in it. I'll see what I can do to reduce that gap.

 

I constructed my own TK from the WTF ANH kit, and I also found some of the areas to be a little tight. By chance, do you have return edges around the openings to the top and/or bottom of the bicep? If so, that may be contributing to the issue (if the problem is when putting your arm in and taking it out). As you can see in some of the reference photos that Glen posted, the armor used in the film lacked return edges in many areas, including the bicep. 

  • Like 1
Link to comment
Share on other sites

53 minutes ago, Tilheyra said:

 

I constructed my own TK from the WTF ANH kit, and I also found some of the areas to be a little tight. By chance, do you have return edges around the openings to the top and/or bottom of the bicep? If so, that may be contributing to the issue (if the problem is when putting your arm in and taking it out). As you can see in some of the reference photos that Glen posted, the armor used in the film lacked return edges in many areas, including the bicep. 

Thanks Brian - the tops of the biceps are fine, it's the bottom of the left arm that is VERY snug. We actually heated it a little to reshape it slightly, as it was more of an 0 shape, rather than an O. That helped. I've left about 2mm of return edge on the bottom and perhaps 3-4mm on the top, but will shave some more out. That might let me cut and shut it for a cleaner look. JCuth99.jpg (That's the bottom edge).

 

I've taken the return edges completely out of the forearms and will do the same on the new shoulder bells too - thanks! 

  • Like 1
Link to comment
Share on other sites

 
This should be helpful. It's a great guide about return edges https://www.whitearmor.net/forum/topic/48166-return-edges-101-ottk/?tab=comments#comment-670906
Thanks heaps - definitely more to take out of the biceps. Most of the others seem to be in line with those guidelines. Cheers
  • Like 1
Link to comment
Share on other sites

Welcome, Chris!

Follow Glens suggestions for those adjustments and retake a couple of photos so we can take another look.

In general looks good, now is the time for refinement so you can get approved first time.

Always good to see another Aussie on our forums.

 

  • Like 1
Link to comment
Share on other sites

Welcome, Chris!
Follow Glens suggestions for those adjustments and retake a couple of photos so we can take another look.
In general looks good, now is the time for refinement so you can get approved first time.
Always good to see another Aussie on our forums.
 
Thanks mate! Literally got started as soon as I read Glen's reply. Stripped off the cover strips for the shins and reglued them and made some adjustments to the strapping.

I took the padding out of the helmet. I think it's just my long neck making it sit high. I can barely get my head in it as it is, so it might just have to sit a bit high. A balaclava will help his my chin and I've blacked the inside of the helmet out.

How do the shims go with the ab rivets? I've already placed them. I could undo and shorten the elastic, but it might make the torso somewhat skewed to the hinged side. Might just be easier to lose a few kgs!

The trickiest part is getting my wife to spot things that look out of place when taking the photos as she has zero interest Can't say she's up to speed with the CRL

  • Like 2
Link to comment
Share on other sites

1 hour ago, cnic_views said:



The trickiest part is getting my wife to spot things that look out of place when taking the photos as she has zero interest emoji28.png Can't say she's up to speed with the CRL emoji51.png
 

Lol, I know exactly what you mean, same happened to me :laugh1:

  • Like 2
Link to comment
Share on other sites

  • 2 months later...

Hi Brains-trust - an update after I finally received the parts my kit was originally missing. I was nervously checking the tracking from the US for weeks. It took two weeks to scoot around the East coast of the US, then one day to San Fran and then next day it was at my house in Australia!

 

New shoulder bells and button covers for my belt have made me (well, my kit) complete! I do have a spare ammo thigh belt that I'll replace at some point as I don't love the original. 

 

I *think* I have finally finished my kit and am about to submit for basic level approval, but if you see anything that needs fixing in the meantime, I'd really appreciate your feedback. Hopefully some quick adjustments I can make to get everything looking tip top.

 

Going off the previous (much appreciated) advice, I changed over the cover strips on my shins to the correct sides. I adjusted my strapping as best I could to balance it out and it's feeling good to wear. Also heat bent the ABS belt to better contour to my body and it's a big improvement.

 

Full Front - Helmet on

aQP3lQ3.jpg

 

Full Back - Helmet on *I'll get a better image for my submission with the velcro lined up, but it was an oversight for these pics.

Bf2gVwY.jpg

 

Left Side - Helmet on - Holster measurements were all checked. The leather is a bit softer than I'd hoped and gapes a bit, making the straps look crooked, but they'd 100% correct according to the CRL

fajvrlU.jpg

 

Right Side - Helmet on

76T0VkS.jpg

 

Waste Up - Helmet off

JJHcEIs.jpg

 

Action Shot *I probably should have thought of something more creative, but my wife laughed when I said that was a requirements, so we wrapped up the shoot.

8yLyQgJ.jpg

 

Any feedback would be awesome and hopefully I'll be joining your ranks soon!

 

Cheers - Chris

 

 

Link to comment
Share on other sites

Welcome and all the best with approval, the journey is worth it. Come up to Sydney sometime to troop, Supa nova is always a cracker 

Link to comment
Share on other sites

Hi Chris, one thing I noticed on your lid is the ear doesn't cover where the faceplate joins the back of the dome. Maybe have to realign the ear cap. 

Also some pics may be needed of your arms held out in front of you to show abs area. 

Nearly there mate. 

3xQZRaB.jpeg

 

Edited by Sithping
Link to comment
Share on other sites

Looking good

 

May be your photo but looks like you may have over trimmed your large ab plate, small ab plate looks like it needs trimming more. Also did you need as wide biceps as your cover strips are very small compared to the raised ridges. Should strap appears to be sitting high, you may want to tighten the strapping so they sit better on the rear.

aQP3lQ3.jpg

 LSuei4K.jpg?1   JViLwBX.jpg?1

 

Bf2gVwY.jpg

You can see the loose elastic under your shoulder strap better on the image below. Normally if they cover better you can also trim 1/2 the larger ridge but appears yours are just covering the backplate.

Posterior is being pushed away from your kidney, V tabs can help this

fajvrlU.jpg

 

Note the elastic helps keep the shoulder straps stay flat.

 

AK9w0mr.jpg?1     lbfFArU.jpg?1     FAKhPZ2.jpg?1

 

NOTE As seen in the photos below, there are no large tabs on the rear of the shoulder bridges.  This is not specifically mentioned in the CRL, but removing them is highly recommended if possible.

 

 qb4YVKO.jpg?1   B3vL4VO.jpg?1

 

V Tabs

With a heat gun (or heat in oven) you bend strips of ABS plastic into the shape of a V, only glue one side and the other remains free to allow movement when you bend. Just helps stop the butt plate from pushing back from the back plate.

 

Q6j9pfd.jpg

 

qrjihT5.jpg

 

Thigh ammo strip corner a little too much

76T0VkS.jpg  2pvrAr5.jpg?1

 

You may need to do some hot water bath work, your shin rears are not sitting very flat, left is not covering the velcro completely

Bf2gVwY.jpg

 

You can also post here for pre approval feedback before submitting to your GML

 

Link to comment
Share on other sites

17 hours ago, Sithping said:

Hi Chris, one thing I noticed on your lid is the ear doesn't cover where the faceplate joins the back of the dome. Maybe have to realign the ear cap. 

Also some pics may be needed of your arms held out in front of you to show abs area. 

Nearly there mate. 

3xQZRaB.jpeg

 

Good spotting! I was repairing a crack and put a filler piece in and completely forgot to refinish that section! Thanks for the reminder. Cheers

  • Like 1
Link to comment
Share on other sites

18 hours ago, Mworm1974 said:

Welcome and all the best with approval, the journey is worth it. Come up to Sydney sometime to troop, Supa nova is always a cracker 

Thanks mate - that'd be terrific. I went to Supa Nova Melb yesterday and it was fantastic. I get up to Sydney a bit, so will be sure to sing out ahead of time. Cheers

  • Like 1
Link to comment
Share on other sites

6 hours ago, gmrhodes13 said:

Looking good

 

May be your photo but looks like you may have over trimmed your large ab plate, small ab plate looks like it needs trimming more. Also did you need as wide biceps as your cover strips are very small compared to the raised ridges. Should strap appears to be sitting high, you may want to tighten the strapping so they sit better on the rear.

 

    

 

 

You can see the loose elastic under your shoulder strap better on the image below. Normally if they cover better you can also trim 1/2 the larger ridge but appears yours are just covering the backplate.

Posterior is being pushed away from your kidney, V tabs can help this

 

 

Note the elastic helps keep the shoulder straps stay flat.

 

          

 

NOTE As seen in the photos below, there are no large tabs on the rear of the shoulder bridges.  This is not specifically mentioned in the CRL, but removing them is highly recommended if possible.

 

    

 

V Tabs

With a heat gun (or heat in oven) you bend strips of ABS plastic into the shape of a V, only glue one side and the other remains free to allow movement when you bend. Just helps stop the butt plate from pushing back from the back plate.

 

 

 

 

 

Thigh ammo strip corner a little too much

  

 

You may need to do some hot water bath work, your shin rears are not sitting very flat, left is not covering the velcro completely

 

 

You can also post here for pre approval feedback before submitting to your GML

 

Thanks Glen - that's really great feedback. I did order a replacement thigh ammo belt, so will get that fixed up prior to submission. 

 

The shoulder bridge large tabs at the back are a bit of a pain. I've got pretty broad shoulders (reminds me - shoulder bells also need trimming) and there's a chance they'll be too short if I lop those tabs off. I've debated about that. 

 

I've got replacement chest button plates as the original owner shaved them down when they purchased. It's on my to do list. I just wasn't sure if I'd be able to get basic approval first and then go back and fix a few of those other steps. 

 

The velcro being shown was a bit of clumsiness in the photo. It's usually covered, but doesn't sit as flat as I'd like, so the hot water bath sounds like a good idea!

 

Thanks for that link too. Really appreciate it! Cheers

  • Like 1
Link to comment
Share on other sites

  • 4 months later...
On 4/8/2024 at 9:44 AM, gmrhodes13 said:

Looking good

 

May be your photo but looks like you may have over trimmed your large ab plate, small ab plate looks like it needs trimming more. Also did you need as wide biceps as your cover strips are very small compared to the raised ridges. Should strap appears to be sitting high, you may want to tighten the strapping so they sit better on the rear.

aQP3lQ3.jpg

 

Bf2gVwY.jpg

 

You can also post here for pre approval feedback before submitting to your GML

 

Hi again @gmrhodes13 - getting my ducks in a row for an EIB application.

 

Quick question as I couldn't see anything in the CRL around cover strip specs, but as pointed out above, my bicep cover strips don't cover enough of the raised section. From memory, those cover strips are supposed to be 12-15mm. They're currently 15mm and match the forearm cover strip width.

 

Do I need to cut and shut them closer (they are extremely snug as it is) and then shim the back of the biceps, OR can I simply put a slightly wider cover strip, say 20mm on the front to cover more of the raised portion? 

 

Same deal with the ABS button covers on the belt. I read someone else's EIB application that they needed to be shaved down flush. Is that recommended or compulsory for higher levels of approval? Mine are probably 4-5mm thick, but unsure if I should remove and do them again. 

 

Any feedback would be awesome.

Link to comment
Share on other sites

Hi Chris,

Most measurements when provided are still only a guide.

Arms usually 15mm is the average yes, but if a mm or 2 are going to make the difference then that is usually ok.

No one will get a ruler out and try and scale your images.

As an example, some make the front cover strips as close as possible, (mine are actually 16mm wide) and on the rear they make them slightly wider if they need extra room.

Thigh cover strips are around 15 - 20, and some have wider on the rear again for extra width if needed.

My Ab plate buttons are definitely raised, although only around 3mm.

I don't think there will be an issue with yours, but let's see if one of our Deployment officers chimes in with some input.

 

More importantly, your armour needs to fit you well. Proportion to match the wearer is a common sense approach we have always taken, and we have troopers of all sizes in the detachment.

Yours looks to fit you well, and only a couple of small dressing adjustments need to be done if you were to take photos for our next level Expert infantry.

  • Like 1
Link to comment
Share on other sites

10 hours ago, Sly11 said:

More importantly, your armour needs to fit you well. Proportion to match the wearer is a common sense approach we have always taken, and we have troopers of all sizes in the detachment.

Yours looks to fit you well, and only a couple of small dressing adjustments need to be done if you were to take photos for our next level Expert infantry.

It's all about how it fits you.

  • Like 2
Link to comment
Share on other sites

19 hours ago, Slouch said:

Any feedback would be awesome.

As Andrew posted it's the @Deployment Officer Team who will look after higher level approval so I will defer to them, hopefully they will be along soon.

 

Reference of the button cover, some makers have these with a molded/vac formed ridge around the outside, sanding the back flush improves the look and they lay flatter on the belt.

HnWXvin.jpg?1

 

*EDIT*

From an EI application

Looking at your ABS belt, the buttons covers, (sides and center), seems to be a bit thick . you may want to remove some edge to make then flatter . 

 

                                                                                                                                                                                               

S0yoYYp.jpg?1     yqxELFe.jpg?1           

 

Reference Images

  rB45qXB.jpg     YOAOw0w.jpg?1     dcPynDT.jpg

 

 

  • Like 1
Link to comment
Share on other sites

On 9/6/2024 at 9:13 PM, Sly11 said:

Hi Chris,

Most measurements when provided are still only a guide.

Arms usually 15mm is the average yes, but if a mm or 2 are going to make the difference then that is usually ok.

No one will get a ruler out and try and scale your images.

As an example, some make the front cover strips as close as possible, (mine are actually 16mm wide) and on the rear they make them slightly wider if they need extra room.

Thigh cover strips are around 15 - 20, and some have wider on the rear again for extra width if needed.

My Ab plate buttons are definitely raised, although only around 3mm.

I don't think there will be an issue with yours, but let's see if one of our Deployment officers chimes in with some input.

 

More importantly, your armour needs to fit you well. Proportion to match the wearer is a common sense approach we have always taken, and we have troopers of all sizes in the detachment.

Yours looks to fit you well, and only a couple of small dressing adjustments need to be done if you were to take photos for our next level Expert infantry.

Thanks so much, everyone!

 

I got cracking yesterday and pulled half my kit apart to make all these changes. THEN remembered I have a troop on Tuesday morning!!! Safe to say it was a late night and luckily the glue has dried today for me to make a few final modifications.

 

I'll post more photos once everything is complete again and I've kitted up.

 

Yesterday was an Armour Party for one!

- Button covers have been shaved down flat to the bare ABS (not raised at all) and glued - they look HEAPS better.

- V-tabs installed to eliminate Stormtrooper-butt. 

- Large AB plate replaced with correct trim (still waiting for that one to dry....)

- Small AB plate shaved/sanded down to be correct thickness and position/ 

- Managed to trim down one bicep and have solved my issue. Looks a million times better.

- Left Bicep still needs some work, but it's more complicated and time wouldn't permit before this troop.

- A few filler pieces/reinforcements to areas prone to cracking.

- Extra layer of elastic over the shoulder bridge added to hopefully keep it hidden.

- Heated/Reshaped Shoulder Bells slightly to sit closer to the chest piece.

- Strapping adjustments mostly all done.

 

I just have three more questions before I'm ready to submit my EIB application.

 

1 - Posterior plate currently has one snap. I'm going to install the second, but am worried the first is somewhat in the middle of where the two should go. Would you place it behind the first one or closer to the opening (cod piece?). I'm leaning towards behind and assume it won't be visible. Is there a spacing recommendation? 

 

bt6EvP8.jpg

 

2. Shoulder Bridge table - I know it's recommended to remove the tabs at the rear if possible, but I've got quite broad shoulders and they won't otherwise reach. Would that get a pass? (provided they're squared up and sitting correctly).

nw4Rc6p.jpg

 

3 - My Han snap - It's not perfectly in the corner of the chest plate. I don't want to damage the armour by moving it. I assume there would be some indentation. How much leeway do we have on that? (This is Centurion level, but I thought I should check now, while everyone is being so helpful!) I feel like a shim would look worse than the snap being 3-4mm to the left.

jb3ltZM.jpg

 

Thanks again! 

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...