Jedxh[501st] Posted January 9 Report Posted January 9 Hi all, As the specific Unmark System Rail is discontinued I am looking for an alternative. The closest I have found is this one There's also these two: https://www.socomtactical.net/tak-tak-smr-metal-rails-set-various-colours/ https://www.lockharttactical.com/store/product/9918-accu-shot-2-05-1913-rail-radius-back-with-hole-spacing-of-1-6-approx Anyone know if any of these would work? Does it need to be exact to the Unmark one? I wouldn't have a clue Quote
gmrhodes13[Staff] Posted January 9 Report Posted January 9 If you know someone with a 3D printer you can find in these files https://www.printables.com/model/155855-st-sterling-l2a1-aeg-and-rogue-one-e-11-conversion I did find some on Aliexpress but was a few years ago, I'll have a dig see if I kept the info 1 Quote
gmrhodes13[Staff] Posted January 9 Report Posted January 9 You could also try Joseph, he was selling First Order rails, should be the same as Rogue One 1 Quote
themaninthesuitcase[Admin] Posted January 9 Report Posted January 9 I also did this 3D file, which should meet Nato specs (I think anyway, it was a while ago I did it), and doesn't have the fake screws. https://www.printables.com/model/238211-standard-f-11d-tfa-to-tlj-conversion-parts 1 Quote
lomis Posted January 9 Report Posted January 9 I used the shorter of the rails sold here but needed to paint them black: https://www.evike.com/products/93187/ 2 Quote
gmrhodes13[Staff] Posted January 9 Report Posted January 9 10 minutes ago, lomis said: I used the shorter of the rails sold here but needed to paint them black: https://www.evike.com/products/93187/ Reference Quote
gmrhodes13[Staff] Posted January 9 Report Posted January 9 Another link for those down under, 3pack, available in black Quite a few come up in a Google search Picatinny SMR 416 Another link single, available in black 3 Quote
Jedxh[501st] Posted January 10 Author Report Posted January 10 Another link for those down under, 3pack, available in black Quite a few come up in a Google search Picatinny SMR 416 Another link single, available in black Oooh I think I'll grab some from the first link you shared. They're metal plus I can't resist that free shipping Quote
justjoseph63[Staff] Posted January 10 Report Posted January 10 I still have a few sets of these I'd like to get rid of, so if anyone needs one all you have to do is pay for postage. Shipping normally runs about $5.50 in the U.S. and around $15.00 internationally. If interested, just PM me for availability and I will let you know the exact cost. Quote
themaninthesuitcase[Admin] Posted January 10 Report Posted January 10 18 hours ago, gmrhodes13 said: Another link for those down under, 3pack, available in black Interestingly those are showing as GBP on that link for me. Also the length and hole centres are within 0.25mm so in theory that will fit my mount if I use the right hole size. adds to shopping list Quote
Jedxh[501st] Posted January 31 Author Report Posted January 31 Rails arrived today. Small one fits nicely on the flashlight and sits flush on the body tube. The rail is secure, but is a little loose when attached, as a result it adds a nice 'metallic rattle' sound, not sure if it's supposed to be that way but I like it honestly. My blasterfactory E-11 is still in its early stages so I'm not sure how I'll mount it as of yet though. Quote
gmrhodes13[Staff] Posted January 31 Report Posted January 31 10 hours ago, Jedxh said: Rails arrived today. Small one fits nicely on the flashlight and sits flush on the body tube. The rail is secure, but is a little loose when attached, as a result it adds a nice 'metallic rattle' sound, not sure if it's supposed to be that way but I like it honestly. My blasterfactory E-11 is still in its early stages so I'm not sure how I'll mount it as of yet though. Very very similar, they are just a little off how much hole the angle cut extends acriss, not that I think it would get picked by your GML "that guy, what would he know" Quote
Jedxh[501st] Posted January 31 Author Report Posted January 31 Very very similar, they are just a little off how much hole the angle cut extends acriss, not that I think it would get picked by your GML "that guy, what would he know" I honesty might be able to file the edge down for that added touch of accuracy Quote
gmrhodes13[Staff] Posted January 31 Report Posted January 31 9 minutes ago, Jedxh said: I honesty might be able to file the edge down for that added touch of accuracy I really wouldn't bother Quote
Sly11[Admin] Posted February 1 Report Posted February 1 I think this is the most images of picatiny rails I’ve ever seen on FISD lol Outstanding. Quote
themaninthesuitcase[Admin] Posted February 1 Report Posted February 1 16 hours ago, Sly11 said: I think this is the most images of picatiny rails I’ve ever seen on FISD lol Outstanding. Got to obsess over the little details 1 Quote
Tilheyra[IPM] Posted February 1 Report Posted February 1 17 hours ago, Sly11 said: I think this is the most images of picatiny rails I’ve ever seen on FISD lol Outstanding. Perhaps it can be said that we now have picatinny rails in our sights! 2 Quote
.thumb.gif.3133dfe8baa328ad146bfe40afe330f0.gif)
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.