TKMilt[TK] Posted September 4, 2023 Report Posted September 4, 2023 Hi! So I started my TK build back in 2009 and took a few year break and decided to finish this build to seek approval so I can attend some events in the Ohio (US) area. A few things to note… I’ve gained weight. I feel like my head has gotten smaller. I need a new body suit. I have a few things left to do such as: • Attaching the lenses to the helmet • Adding a helmet liner / system• Buying & Adding a mic setup • Figuring out how to buy / attach the thermal detonator with metal clips • Buying a new body suit 🫣 Hope these pics go through. Excited to finish this and get out there to restore the galaxy to order. Sent from my iPhone using Tapatalk 1 Quote
Nairy[Staff] Posted September 4, 2023 Report Posted September 4, 2023 Hello and welcome! Wow judging on these pictures it looks great already on you! You might want to lower the thighs and shins a tad bit since it will be hard to move around with them that high up! Are you excited? Quote
Nairy[Staff] Posted September 4, 2023 Report Posted September 4, 2023 Straps on the inner side of the shoulder bells will help them from bending too much upwards! Quote
TKMilt[TK] Posted September 4, 2023 Author Report Posted September 4, 2023 3 minutes ago, Nairy said: Hello and welcome! Wow judging on these pictures it looks great already on you! You might want to lower the thighs and shins a tad bit since it will be hard to move around with them that high up! Are you excited? I am pumped! Ok good call, maybe I've also gotten a tad taller - not mad about that one. Walking proved difficult... and bending was near impossible. Is this common? I will lower the thighs, the shins were super tight against the boots, I will try to loosen them, but afraid I might break them. Quote
TKSpartan[Staff] Posted September 4, 2023 Report Posted September 4, 2023 Welcome to FISD Seth . Overall looking good. It would be great if you can post some photos with the complete suit up (black suits included), so we can see the final fit. Keep it up. Quote
TKMilt[TK] Posted September 4, 2023 Author Report Posted September 4, 2023 Welcome to FISD Seth . Overall looking good. It would be great if you can post some photos with the complete suit up (black suits included), so we can see the final fit. Keep it up. Will do! Purchased a new bodysuit (Amazon) this morning and thermal detonator clips from Etsy. I’m going to need to do some work on the straps… some need lengthening others shorter. Are most folks ANH troopers? I’m thinking about going ESB. Sent from my iPhone using Tapatalk Quote
TKSpartan[Staff] Posted September 4, 2023 Report Posted September 4, 2023 20 minutes ago, TKMilt said: Are most folks ANH troopers? I’m thinking about going ESB. Most are ANH, If you go for ESB taka a read to the CRL for each one to consider the differences between them . https://databank.501st.com/databank/Costuming:TK_anh_stunt https://databank.501st.com/databank/Costuming:TK_esb Quote
TKMilt[TK] Posted September 4, 2023 Author Report Posted September 4, 2023 Thanks bunches. I will take a look. First step is just just finish this way overdue project. Once my items come in, will post some updated pictures. 2 Quote
gmrhodes13[Staff] Posted September 4, 2023 Report Posted September 4, 2023 Hello and welcome, that's certainly a long build, looking forward to seeing you approved soon 1 Quote
Nairy[Staff] Posted September 5, 2023 Report Posted September 5, 2023 Since you already have the ANH hand plates you could start with doing an ANH and then in the future converting to an ESB! Quote
TKMilt[TK] Posted September 5, 2023 Author Report Posted September 5, 2023 Since you already have the ANH hand plates you could start with doing an ANH and then in the future converting to an ESB! Agree! Some parts show up today so hoping to knock this out once and for all Sent from my iPhone using Tapatalk 2 Quote
Starkiller[TK] Posted September 6, 2023 Report Posted September 6, 2023 Welcome, Seth! Looking forward to seeing the completed build! Looks like it will be a good fit! 2 Quote
Sly11[Admin] Posted September 6, 2023 Report Posted September 6, 2023 Welcome aboard Seth. Thats got to be some kind of record for a build, but you are looking good to now bring it full circle and complete. We are here to offer assistance in every way we can. Looking forward to seeing this finished and you as an approved Stormtrooper (TK) 1 Quote
TKMilt[TK] Posted September 6, 2023 Author Report Posted September 6, 2023 Thanks!!Helmet lenses and padding installed yesterday - want to add some sort of voice system next so will do some searching. New body suit showed up yesterday and now just waiting for the thermal clips and should be all done after adjusting some snaps and straps. Pics to come! Sent from my iPhone using Tapatalk 1 Quote
swibowoj[TK] Posted September 7, 2023 Report Posted September 7, 2023 (edited) Hello and Welcome to FISD never too late to join as a Stormtrooper. Who is the maker of your armor? I was amazed, after 14 years it is still white, not yellowing. Edited September 8, 2023 by swibowoj Quote
TKMilt[TK] Posted September 7, 2023 Author Report Posted September 7, 2023 I think AP! Was trying to go through the paperwork but just had printed instructions without the maker unfortunately. Sent from my iPhone using Tapatalk Quote
gmrhodes13[Staff] Posted September 7, 2023 Report Posted September 7, 2023 A couple of tweaks you could make, thigh coverstrips should stop at the top of the bottom ridge. Shoulder straps appear not to be fixed in the front. Belt can could come up a little. Also note you have some return edge on the shoulder bells which you could trim off, screen armor had the sides of the shoulder bells curved. AP does have one of the smallest helmets out there, if you have any issues putting it on don't forget to put it on sideways then twist straight Quote
TKMilt[TK] Posted September 7, 2023 Author Report Posted September 7, 2023 This is super helpful. And yes very small I’ll work on this after these strap and snap adjustments! Sent from my iPhone using Tapatalk 1 Quote
TKMilt[TK] Posted October 28, 2023 Author Report Posted October 28, 2023 So I’m not sure about trimming the strips without having major issues with the overlapping pieces. And any tips for the butt armor to not stick out? I think if the strips aren’t a dealbreaker I’m ready to submit for approval! Sent from my iPhone using Tapatalk Quote
gmrhodes13[Staff] Posted October 28, 2023 Report Posted October 28, 2023 Doesn't time fly, I think this build is one for the longest build awards Your photos are very low resolution so hard to make some issues out, here are just a few. Tighter strapping on the ends of the posterior can help. I came up with the V tab idea, helps keep closed that area With a heat gun you bend strips of ABS plastic into the shape of a V, only glue one side and the other remains free to allow movement when you bend. Just helps stop the butt plate from pushing back from the back plate. Right thigh should come up to match the left, will give you a little more room at the knee. Cover strip should stop just above the knee ridge Belt could come up a touch more Elastic should be on the lower shoulders, helps to bring them inwards "The top of the ABS belt shall sit at or just above the bottom of the central and vertical ab button panels. A slight overlap is suggested, but not required." Shoulder straps are sitting up on the backplate, may need some heat to get them to come down "For Level 2, no visible rivets are present. For Level 3, they shall free float in the back, be glued in the front and need to be held down in the back via a white elastic band to the white fabric/elastic chest/back connection. Ideally this strap should be 1/4 inch (5 mm) wide, and connect over the tab at the top of the back armor. The bridge should also lay flush against the back." Detonator should sit down on the belt, also appears the control panel not trimmed correctly Backplate overlapping the kidney Bicep may need more trimming on the bottom Rear armor pieces ie thighs should not overlap they should be trimmed straight, glued with a cover strip on the front. Normally if you have the cut out at the top of the shin you would also add this to the thighs Don't loose hope, most are just adjustments and it's rare to get everything right on the first go around Quote
TKMilt[TK] Posted October 28, 2023 Author Report Posted October 28, 2023 ooof this is a lot of blue boxes! But to my defense I did have to dress myself so hopefully I can tweak this and report back! Thanks again for the counsel super helpful with this way overdue completion. I think I can handle the adjustments versus a complete redo lol. 1 Quote
MaskedVengeance[Staff] Posted October 30, 2023 Report Posted October 30, 2023 Worry not, Seth! All of us had that "blue boxes" at one point. =) Self-dressing can definitely be challenging, and even now I need somebody to assist me with several things. Just keep chipping away, focusing on one item at a time. We'll get you approved here in no time! 1 Quote
TKMilt[TK] Posted October 30, 2023 Author Report Posted October 30, 2023 I can’t wait! I also added my local garrison so hopefully when ready will be seamless. Sent from my iPhone using Tapatalk Quote
TKMilt[TK] Posted December 25, 2023 Author Report Posted December 25, 2023 Just letting folks know I am pending approval from my local garrison after making the required changes (: More to come and Merry Christmas / Happy Holidays! 1 Quote
gmrhodes13[Staff] Posted December 25, 2023 Report Posted December 25, 2023 2 hours ago, TKMilt said: Just letting folks know I am pending approval from my local garrison after making the required changes (: More to come and Merry Christmas / Happy Holidays! Great to hear, hope you have some good news soon. Once issued with your TKID you can request TK / 501st access here Good luck Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.