The filling and glue of a armor ?

[Rivera88]

There is any fast step to glue and not paint the armor ? 

 

Any tips am just starting arms and chest but with me been worry to mess up 

[Sly11[Admin]]

With many of the FO TK kits you need to glue and paint as well as fill in seams etc.

ABS paste is certainly a way to reduce or avoid in some cases, the need to use other bonding and filling agents which require painting over.

Generally you need to keep all your scrap cut offs from trimming your armour, and use some acetone to melt down the ABS pieces to create  ABS paste which is either the same colour as your armour or only a touch off it.

 

Here is a Link to the thread on ABS paste, have a look and experiment with some scraps to see how it can work.

 

Of course it will require sanding after applied to give the smooth finish, then some polishing to buff it up to a good shine.

 

 

 

 

[gmrhodes13[Staff]]

What maker kit is this, looks very soft on the pull and has the chest greebles incorporated?

 

You can find a lot of information through others build threads, this one is very detailed 

 

[Rivera88]

Yea these looks good I was thinking was not the same as other armors but the chest part looks decent..

[Sly11[Admin]]

16 hours ago, gmrhodes13 said:

What maker kit is this, looks very soft on the pull and has the chest greebles incorporated?

 

You can find a lot of information through others build threads, this one is very detailed 

 

Looks like 850 armor works to me Glen.