Pistols and blaster rifles

[Sly11[Admin]]

We see the imperial Commandos using few different blasters in episode 23 and 24, we currently don't have a stack of clear references but there are a few out there

Please share what you find here.

 

I'll start with what looks to be their standard side arm, a hybrid  of the old SE-14 as seen in this screen cap.

 

 

[BigJasoni[TK]]

Definitely looks like another modified E-10. This one appears to be the same basic concept of the extended barrel SMG with an HK-416 stock, M.H.R. 1943 M43 scope and a few similar accessories. However, I'm having a difficult time determining if they're utilizing another Sterling SMG for the base of the blaster or if they went with something else. I robbed this pic from another thread, but am curious if there's anything else showing this blaster in full frame? 

 

[Sithtrooper02[TK]]

Hi,

Since I'm doing my build for the imperial commando, I wanted to have a rifle and decided to design it, as none is available on the web. I gathered the pictures from the Madolorian S3 E17/E18 and here are the additional pictures I used on top of the one above in the thread to design the rifle. 

[Sithtrooper02[TK]]

Here is the first version of the design. It's a few days from being completed to be ready for 3D printing. I have taken a snapshot with the same orientation as the highest definition picture taken in the movie. Comments/ corrections required would be welcome

I can only post 1 picture here ( all thread files posted need to be below 500kb ?!?), so here's the link for a google drive containing the other views.

https://drive.google.com/drive/folders/1cqZ70bAP41Jh9NEoOWGJuqDjssh0HBSf?usp=sharing

 

 

Edited February 14 by Sithtrooper02

[Moff976[501st]]

Fantastic resource! Thanks for putting these together!

[gmrhodes13[Staff]]

6 hours ago, Sithtrooper02 said:

I can only post 1 picture here ( all thread files posted need to be below 500kb ?!?

 

Correct forum only allows a certain amount of images and size, most use a free online image host, upload their images there then copy the links into their forum posts

 

 

[Wompet[TK]]

Sorry about being a bit late to the discussion, but I remember thinking when I saw that episode “Hey, that’s the gun the Mountain Troopers were supposed to have! (At least according to Hasbro.)

And then I completely forgot about it.

Anyway, here’s the E-11P (after the initial modeler)/Mountain Trooper blaster:

https://forum.501stpathfinders.com/topic/21874-mountain-trooper-new-weapon/

I should still have the files on my Google drive, but I’ll have to check.

 

[Sithtrooper02[TK]]

Thanks Wompet,

 

It is a bit similar, but many many differences. The mountain trooper gun refence is here on the CRL:
https://databank.501st.com/databank/File:MT_blaster.png

 

You can see from reference pictures in this thread above that, many things are not similar. But stock is a PDW style with two side rods, no side mag, front rail under the grip, metallic disk separating barrel from receiver, not a sterling ejector (longer and thinner), The M38 scope is on a submount, no hole in the front barrel, but 4 rows of grips,etc...

[Sithtrooper02[TK]]

Here's the pics of the finished blaster rifle! from 3D print, sanding/bondo/primer/black basecoat/dark aluminum airbrush / black airbrush and scratching/weathering. The few metallic parts are graphite finished. Only M38 scope is brass finished as original part wear out coloring.  I also took a picture with my current Sith trooper armor, while the other one is far from finished to give a feel of the size and handling.

 

[url=https://ibb.co/yBNHrSn][/url]

[url=https://ibb.co/yBNHrSn][/url]

[url=https://ibb.co/d6RGjjk][/url]


[url=https://ibb.co/KN4ccGK][/url]


[url=https://ibb.co/VHpMqZ5][/url]

Edited February 27 by Sithtrooper02

[Tilheyra[IPM]]

That's fantastic! Great work with the painting and weathering as it looks like metal! Awesome armor as well!

[gmrhodes13[Staff]]

13 minutes ago, Sithtrooper02 said:

Here's the pics of the finished blaster rifle! from 3D print, sanding/bondo/primer/black basecoat/dark aluminum airbrush / black airbrush and scratching/weathering. The few metallic parts are graphite finished. Only M38 scope is brass finished as original part wear out coloring.  I also took a picture with my current Sith trooper armor, while the other one is far from finished to give a feel of the size and handling.

 

https://ibb.co/yBNHrSn][/url]

https://i.ibb.co/6Nd9DY8/6-D09-D1-E5-9-A78-4-C72-8-C7-E-B00-C1-DCE45-F9[/url]

https://i.ibb.co/xm9KKsF/AFFC31-A7-A2-EA-40-E7-A82-D-C971-BEA2-CCDC[/url]

https://i.ibb.co/z8HP4YD/6-FB65-B4-A-DEB1-4-F25-9-A6-A-849724-BAF758[/url]

https://i.ibb.co/CvfhmmV/6-DB618-D1-ADEF-49-DD-A48-B-D6-DDD5-FD73-D6[/url]

Looks like some of your image links aren't working, I'm only seeing one image

[Sithtrooper02[TK]]

@gmrhodes13 Sorry, my first time working to post images on a BB for a long  time, there are an infinite numbers of ways to post. Now fixed!

 

[gmrhodes13[Staff]]

36 minutes ago, Sithtrooper02 said:

@gmrhodes13 Sorry, my first time working to post images on a BB for a long  time, there are an infinite numbers of ways to post. Now fixed!

 

Some very nice metal weathering there  

[Moff976[501st]]

Absolutely fantastic job!  

[revlimiter[Staff]]

Admittedly I'm on very strong pain meds at this moment. But... were the print files shared somewhere or purchasable? I don't see links in this thread or the Pathfinders one. It's a lovely blaster.

[Sithtrooper02[TK]]

@revlimiter thanks for the nice feedback! Yes I made them available and asked that they are added to the vendor list. The STL or 3D printed version is available on Esty in the Millenniummaker shop. https://www.etsy.com/ca/shop/MillenniumMaker?ref=shop_sugg_market