mnwnwo[TK] Posted March 24, 2023 Report Posted March 24, 2023 Doing my first troop in a few weeks and am super paranoid about my Opleprops lens fitment in my RS ANH Stunt bucket. There is a decent gap on the sides. Do I need to try and seal the top sides to make it more flush? Quote
FN1313[TK] Posted March 24, 2023 Report Posted March 24, 2023 Doing my first troop in a few weeks and am super paranoid about my Opleprops lens fitment in my RS ANH Stunt bucket. There is a decent gap on the sides. Do I need to try and seal the top sides to make it more flush?Having some gap is fine. In fact it’s actually pretty beneficial. The airflow that comes from it helps prevent fogging up lenses and makes the helmet less stuffy. So long as the appearance doesn’t allow others to see through to your face, you should be fine.Sent from my iPad using Tapatalk Quote
MaskedVengeance[Staff] Posted March 24, 2023 Report Posted March 24, 2023 I second what Kyle said. Some gaps are certainly normal. Have fun on your troop! 1 Quote
Morgi[Staff] Posted March 24, 2023 Report Posted March 24, 2023 As others said before, it's alright, if not beneficial to have a bit of a gap. If you want to close it for the sake of perfection, it might help if you adjust the lens material. That means getting one side loose, pushing the material inwards until it's flat against the eye holes and creating a second hole in the lens material for the screw. You got this! Quote
gmrhodes13[Staff] Posted March 24, 2023 Report Posted March 24, 2023 You can also cut your lens down to just a little bigger than the eye sockets, this allows a closer fit, I use silicon to hold mine in place. I mainly did this as my hero helmet is a lot smaller and the sheet of lens material would rub on my nose, no issues now though. A small gap can help airflow although installing fans will be even better. Good luck on your first troop Quote
mnwnwo[TK] Posted March 27, 2023 Author Report Posted March 27, 2023 Thanks everyone! I appreciate it a lot. 1 Quote
Bags115[TK] Posted April 3, 2023 Report Posted April 3, 2023 I hop your troop as good ! Question for you, where you buy your's green lense ? So cool ! Thank's Quote
gmrhodes13[Staff] Posted April 3, 2023 Report Posted April 3, 2023 Safety equipment suppliers do a green safety lens, just have to check some can supply dark grey not green https://www.amazon.com/Hobart-770580-Shield-Replacement-Shaded/dp/B002VECKRO/ref=sr_1_12?crid=2CSN738CIT7NI&keywords=safety+shield+green+lens&qid=1680486303&sprefix=safety+sheildgreen+lens%2Caps%2C350&sr=8-12 Trooperbay also sells lens materail Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.