Toddo[TK] Posted March 9, 2023 Report Posted March 9, 2023 Armor = 850 Armor Works Helmet= 850 Armor Works Blaster= 3D Printed - Premier Props stl Toddo's Profile Boots: Imperial Boots Soft Parts: Jimiroquai 2 Quote
TKSpartan[Staff] Posted March 9, 2023 Report Posted March 9, 2023 Hi Todd, Thank you for applying for EIB . One of us will be with you as soon as possible. Added to the processing line. 2 Quote
Doggydoc[Staff] Posted March 10, 2023 Report Posted March 10, 2023 Looking good Todd. Good luck on your approval. Quote
Crampeat[TK] Posted March 10, 2023 Report Posted March 10, 2023 Great looking kit. Good luck Todd! Quote
gmrhodes13[Staff] Posted March 10, 2023 Report Posted March 10, 2023 Nice to see you back with another version TK Todd. You may want to double check that scope assembly 1 Quote
Toddo[TK] Posted March 10, 2023 Author Report Posted March 10, 2023 6 hours ago, gmrhodes13 said: Q, my friend, you know how water drains the opposite way in this hemisphere? The same goes for scope direction All fixed. 6 hours ago, gmrhodes13 said: Nice to see you back with another version TK Todd. You may want to double check that scope assembly Quote
gmrhodes13[Staff] Posted March 10, 2023 Report Posted March 10, 2023 5 hours ago, Toddo said: All fixed. Not quite, the ends are on the wrong way to the main body, you had the body the correct way to start with, was just the ends which needed swapping Actually while you are there you may just want to check for any print lines, I noticed the endcap has quite a few, I'm sure the DO's will comment on it L2: 3D printed blasters can not contain visible print lines and must be sanded smooth for a more realistic appearance. 1 Quote
Toddo[TK] Posted March 10, 2023 Author Report Posted March 10, 2023 38 minutes ago, gmrhodes13 said: Not quite, the ends are on the wrong way to the main body, you had the body the correct way to start with, was just the ends which needed swapping Actually while you are there you may just want to check for any print lines, I noticed the endcap has quite a few, I'm sure the DO's will comment on it L2: 3D printed blasters can not contain visible print lines and must be sanded smooth for a more realistic appearance. Got the scope sorted. It's funny to me that I couldn't see that. I only own like five E-11s. 1 Quote
Toddo[TK] Posted March 10, 2023 Author Report Posted March 10, 2023 Print lines smoothed on the encap. 1 Quote
Sly11[Admin] Posted March 11, 2023 Report Posted March 11, 2023 That does look better. Great work on this build best of luck with your approval. 1 Quote
TKSpartan[Staff] Posted March 21, 2023 Report Posted March 21, 2023 Hi Todd, We apologize for delaying and thank you for your patience . We have some additional photos to request and a couple of items we need you to jump on before we can move you along and get that EI badge under your name. Additional photos -ABS belt close up -TD (Thermal Detonator) front and connection mount -Cod armor -Left/right and front sniper knee plate close up -Left/ right and front thigh ammo pack close up -Boots (showing tops and sides) Items to fix 1- CRL for Basic : Tears and traps may not be hand-painted. The paint job on the tears and traps will need some fix to look smooth. References 2- CRL L2 There is a roughly 8mm circular indent near the right top corner of the backplate. It could be a light effect but it looks like the requested circular indent is not present in your Back plate. Reference Image 3- Your large Ab buttons panel seems to be a 3D printed piece as it shows some lines that will need to be sanded a little more. 4 - CRL L2 : The thermal detonator mount should be fully enclosed with solid walls on all four sides. Thermal detonator... is accurate in detail and proportion to official references. The TD plate should cover the entire top and extend to the back, as there are solid references for this and it is highly noticeable. 5- CRL L2 3D printed blasters can not contain visible print lines and must be sanded smooth for a more realistic appearance. Bellow you can see that there are some places that clearly shows printed lines and will need a sanding and we recommend a new painting session to give a smooth and cleaner appearance . By the other hand, The folding stock shows two separated parts and it should be one single piece. Filling and sanding will be necessary and the ammo counter needs to be relocated to a more accurate position as shown Finally Brother, as Glen correctly pointed, the Scope appears to be wrong assembled and needs to be corrected. Reference Reference Image We are confident that you can do the fix Trooper! Quote
Chemi[Staff] Posted October 24, 2023 Report Posted October 24, 2023 Due to the delay in any movement on this submission we are considering it inactive. If you would like to continue, please get in touch with any member of the D.O. staff. Thanks! Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.