Dblcross's 5.0 AM Build Thread

[dblcross[TK]]

Ok, first partial kit up because I want to see how my thighs look. I'm using a belt with 2" nylon and velcro inside the thighs and on the end of the nylon for adjustment up and down. Once it's good I may change it to a snap-type system with the belt. At the moment I don't have any rear shots because the other half is still at work. once she's home, which is why I'm not wearing my boots! I couldn't get them on!  I'll suit up again for some rear shots. Also, I've got the wrong size double cap rivets, so my ammo pack isn't ready. Any input on this would be wonderful! Jeez, you wonder if I'm from Memphis, TN. with Elvis whiskey in the background!

Edited April 4, 2023 by dblcross
spelling

[gmrhodes13[Staff]]

A little hard to judge spacing without boots for the legs, does make a difference.

 

Can't quite see the overlap of chest to ab but it does look like you could bring the abdomen up a touch.

 

Note the shin cover strip should cover the top ridge, you have yours trimmed below the ridge  

 

 

[dblcross[TK]]

1 hour ago, gmrhodes13 said:

A little hard to judge spacing without boots for the legs, does make a difference.

 

Can't quite see the overlap of chest to ab but it does look like you could bring the abdomen up a touch.

 

Note the shin cover strip should cover the top ridge, you have yours trimmed below the ridge  

 

 

Fixed!  

[dblcross[TK]]

My power went out as soon as I suited up but I got a lot done today. Belt finished (I loved[mention=33204]fn1313[/mention] 's use of Chicago screws). Also finished the ammo pack on thigh.   

Sent from my SM-G781V using Tapatalk

Edited April 6, 2023 by dblcross
spelling

[FN1313[TK]]

My power went out as soon as I suited up but I got a lot done today. Belt finished (I loved[mention=33204]fn1313[/mention] 's use of Chicago screws). Also finished the ammo pack on thigh . https://i.imgur.com/4521u3R.jpeg https://i.imgur.com/qZZwxNa.jpeg https://i.imgur.com/HaddG9h.jpeg https://imgur.com/a/gqlPXBM https://imgur.com/a/dgmwUjt https://i.imgur.com/1BZPekG.jpeg https://i.imgur.com/5WvWXVw.jpeg looks like I need some adjustment on my thighs. It's velcro so it should be hard to do. https://i.imgur.com/fCSlWAv.jpeg https://i.imgur.com/bWfWIaQ.jpeg https://i.imgur.com/n69Aw3G.jpeghttps://i.imgur.com/rBMx4VY.jpg sorry for the links. My power is out and I can't get on the desktop.

Sent from my SM-G781V using Tapatalk

Good work on the belt. I’m just waiting to get access to a sewing machine to sew some of the elastic parts.


Sent from my iPad using Tapatalk

[TKSpartan[Staff]]

11 hours ago, dblcross said:

My power went out as soon as I suited up but I got a lot done today. Belt finished (I loved[mention=33204]fn1313[/mention] 's use of Chicago screws). Also finished the ammo pack on thigh.   

Sent from my SM-G781V using Tapatalk

Looking good, just check your right thigh going a little lower than the left.  Easy fix . 

[gmrhodes13[Staff]]

Note sure if you can make this out but the bottom curve looks a little off compared to the other side

 

Reference, note they aren't as rounded as some think  

[dblcross[TK]]

Note sure if you can make this out but the bottom curve looks a little off compared to the other side

 
Reference, note they aren't as rounded as some think  

Is this better?

Sent from my SM-G781V using Tapatalk

[dblcross[TK]]

I had to move one of my snap plates cause it was way too hard trying to connect it

Sent from my SM-G781V using Tapatalk

[Doggydoc[Staff]]

That lower one can be awkward to reach

[dblcross[TK]]

That lower one can be awkward to reach

I looked like a dog chasing it's tail trying to reach it.

Sent from my SM-G781V using Tapatalk

[FN1313[TK]]

Looks like you went with the nylon strapping mounts too. I found they’d likely be easier to work on.


Sent from my iPhone using Tapatalk

[dblcross[TK]]

Looks like you went with the nylon strapping mounts too. I found they’d likely be easier to work on.


Sent from my iPhone using Tapatalk

I would agree 100%. I've still got a few more to change out.

Sent from my SM-G781V using Tapatalk

[FN1313[TK]]

Yeah I didn’t know how well it would hold or work, but so far seems good. I’m just sanding the armor where I’m gluing them.


Sent from my iPhone using Tapatalk

[dblcross[TK]]

ABS paste gap filling and repair night

Sent from my SM-G781V using Tapatalk

[dblcross[TK]]

Also, when I get bored at work, I run to the forums. Finally I realized my shins were closing the wrong way (inside to out) so I spent the evening fixing that. If you want to see mistakes and then fixes, just hang out!

Sent from my SM-G781V using Tapatalk

[dblcross[TK]]

I really need to get my storage bin bought. My BBB is hanging in there!

Sent from my SM-G781V using Tapatalk

[gmrhodes13[Staff]]

8 hours ago, dblcross said:

I really need to get my storage bin bought. My BBB is hanging in there!
 

A very common image  

[FN1313[TK]]

A very common image  

My wife wonders when she gets her living room back. I said next paycheck.


Sent from my iPhone using Tapatalk

[dblcross[TK]]

Any suggestion on how to keep my thigh harness belt from slipping down when I breathe? Should I consider suspenders?

[gmrhodes13[Staff]]

20 minutes ago, dblcross said:

Any suggestion on how to keep my thigh harness belt from slipping down when I breathe? Should I consider suspenders?

My belt is supported by braces over my shoulders

 

[Doggydoc[Staff]]

21 minutes ago, dblcross said:

Any suggestion on how to keep my thigh harness belt from slipping down when I breathe? Should I consider suspenders?

I had the same problem and rigged up suspenders and they work very well

[Sly11[Admin]]

Suspenders for the easy win.

[dblcross[TK]]

My belt is supported by braces over my shoulders
 

Did you make these?

Sent from my SM-G781V using Tapatalk

[dblcross[TK]]

Did you make these?

Sent from my SM-G781V using Tapatalk

Ok I understand the diagram, top right is now.

Sent from my SM-G781V using Tapatalk