equuspolo[TK] Posted December 12, 2022 Report Share Posted December 12, 2022 (edited) Name: Ardeshir Radpour Username: equuspolo TK-42128 Southern California Garrison Los Angeles Squadron Height = 5'10 Weight = 165 Armor Maker = Denuo Novo Helmet Maker = Denuo Novo Premium Boot Maker = Imperial Boots Gloves = Endor Finders Belt = Denuo Novo Belt Pouches = Denuo Novo and Trooperbay Pauldron = Denuo Novo Neck Seal = Denuo Novo Holster Maker = Damtooine props and Denuo Novo Gaskets = production made silicon rubber gaskets F-11 = Branfuhr Studios Resin Kit- Custom built by me with custom light system. SE-44C = 3DPrintMerchant Electronics = Wireless Microphone with Acker Amp Custom Parts = Chest yoke and Backplate welded together with ABS Slurry. Chest Pills and Chest cut out backed with Textured Fabric, TD custom modified Denuo Novo. Belt, Cod, Butt Plate and TD attached to armer with custom Made Anovos leather waist tassets. Holster Dantooine props, urethane spats from Sanitized Creations abs spats urethane spats corrected without picatinny rail SE-44C Edited April 8, 2023 by equuspolo Added image 5 Quote Link to comment Share on other sites More sharing options...
TKSpartan[Staff] Posted December 14, 2022 Report Share Posted December 14, 2022 You're now in the processing line sir. 1 Quote Link to comment Share on other sites More sharing options...
equuspolo[TK] Posted December 15, 2022 Author Report Share Posted December 15, 2022 Thank you 1 Quote Link to comment Share on other sites More sharing options...
equuspolo[TK] Posted January 11, 2023 Author Report Share Posted January 11, 2023 Just wanted to check in Quote Link to comment Share on other sites More sharing options...
equuspolo[TK] Posted January 18, 2023 Author Report Share Posted January 18, 2023 Hey Mario just wanted to check in with you about this 1 Quote Link to comment Share on other sites More sharing options...
TKSpartan[Staff] Posted January 18, 2023 Report Share Posted January 18, 2023 6 hours ago, equuspolo said: Hey Mario just wanted to check in with you about this Hi Ardeshir, This one is in the line, hang in there buddy, thank you for your patience. 1 Quote Link to comment Share on other sites More sharing options...
equuspolo[TK] Posted January 23, 2023 Author Report Share Posted January 23, 2023 Same question. Should I just forget about these two submissions? I’m fine with walking away from these submissions if the question I raised regarding the methodology behind the ring and ring holder which actually doesn’t even apply to this one. Just curious. Quote Link to comment Share on other sites More sharing options...
equuspolo[TK] Posted January 23, 2023 Author Report Share Posted January 23, 2023 Not really sure what is holding up this application? Quote Link to comment Share on other sites More sharing options...
Sly11[Admin] Posted January 24, 2023 Report Share Posted January 24, 2023 Nice upgrade 1 Quote Link to comment Share on other sites More sharing options...
equuspolo[TK] Posted January 24, 2023 Author Report Share Posted January 24, 2023 20 minutes ago, Sly11 said: Nice upgrade Thanks brother. The color of the red is so hard to catch in a photo. It’s a solid bright red and it looks so cool. I’m the photo you see the white glow but in person it’s not that at all and so hard to catch on camera. It’s such a nice upgrade to be honest. thank you Quote Link to comment Share on other sites More sharing options...
equuspolo[TK] Posted January 24, 2023 Author Report Share Posted January 24, 2023 SE-44C mounted 2 Quote Link to comment Share on other sites More sharing options...
TKSpartan[Staff] Posted January 30, 2023 Report Share Posted January 30, 2023 On 1/23/2023 at 3:09 PM, equuspolo said: Not really sure what is holding up this application? Hi Ardeshir I apologize for the delay , I'm working on your app right now. 2 Quote Link to comment Share on other sites More sharing options...
equuspolo[TK] Posted January 30, 2023 Author Report Share Posted January 30, 2023 8 hours ago, TKSpartan said: Hi Ardeshir I apologize for the delay , I'm working on your app right now. No worries at all 1 Quote Link to comment Share on other sites More sharing options...
TKSpartan[Staff] Posted February 1, 2023 Report Share Posted February 1, 2023 Hi Ardeshir In order to continue with your review, I would need you to address a couple of details on your TFA submission. 1- Update de F11 D Blaster Photo with NO Picatinny Rail, even though you have clarified it was removed for the full armor action photo, we would like to avoid any confusion for future applicants. 2- As the CRl states for Level 2 : 3D printed blasters can not contain visible print lines and must be sanded smooth for a more realistic appearance. Your SE-44C Pistol looks like showing some printed lines that will need be sanded a bit more . Quote Link to comment Share on other sites More sharing options...
equuspolo[TK] Posted February 2, 2023 Author Report Share Posted February 2, 2023 It’s not printed lines it’s rhe way it was but not print lines. I believe in the actual file but I’ll fix that for sure and no problem on rhe f-11 photos as well 1 Quote Link to comment Share on other sites More sharing options...
equuspolo[TK] Posted February 2, 2023 Author Report Share Posted February 2, 2023 4 Quote Link to comment Share on other sites More sharing options...
equuspolo[TK] Posted February 2, 2023 Author Report Share Posted February 2, 2023 (edited) print lines removed on site. The lines you pointed out on grip are not print lines they are the grip texture Edited February 3, 2023 by equuspolo 1 Quote Link to comment Share on other sites More sharing options...
justjoseph63[Staff] Posted February 3, 2023 Report Share Posted February 3, 2023 Hi Ardeshir! So at this point we have a bit of a dilemma. Although your blaster is good to go, since you have included your SE-44C with your submission it also falls under the CRL requirement that 3D printed blasters can not have visible print lines and must be sanded smooth. I understand your statement about the grip texture, but as you can see below there are several areas that need to be addressed in order to meet that requirement. If you have taken care of these already that's GREAT! If so, just post up a few detail pics and we can move along. Since only one weapon is required for this level, the alternative would be to remove all images of the pistol from your submission thread. Quote Link to comment Share on other sites More sharing options...
equuspolo[TK] Posted February 3, 2023 Author Report Share Posted February 3, 2023 It’s removed. It is barely if at all visible in person. Photos capture it a bit but in person it is not captured but I removed it. I don’t have time right now to do it so I just removed it Quote Link to comment Share on other sites More sharing options...
TKSpartan[Staff] Posted February 4, 2023 Report Share Posted February 4, 2023 Hi Ardeshir , and thank you for your EIB application! CRL and EIB Application Requirements: All required photos have been submitted, and on behalf of the entire D.O. staff we are pleased to welcome you to the rank of Expert Infantry. Congratulations! Other-Armor Fit/Assembly; In this area we review observations made by your fellow troopers and the DO team. Some observations may lead to suggestions to improve the overall look of your armor, and please keep in mind that we consider both text (CRL) and pictures (screen caps/reference images) when reviewing submissions. Looking at the under suit, it looks very wrinkled in that area, not a big deal and probably noticeable only when under direct light. But we pointed since we can see it Reference Images *************************************************** Centurion Requirements: In this section we prepare you for our highest tier of approval. Because Centurion photos must show more detail than EIB, items pertaining to Level 3 might be seen there and not here and additional photos may be required. We try to point out all that we can from what we are able to clearly see, but the final accuracy is the responsibility of the trooper. Moving down the calves , they seem too big, a lot of gap can be seen between the armor and the leg(pic. 1). This is something we could see in your previous TFA application (pic. 2), but it seems that in this case, it is a bit more evident... #1 Current app different angle #2 Previous TFA app Once more, Congratulations Trooper !!! 1 Quote Link to comment Share on other sites More sharing options...
equuspolo[TK] Posted February 4, 2023 Author Report Share Posted February 4, 2023 Thank you brother. Appreciate it beyond words. As soon as I have modified the SE-44C I will upload it for future reference as well. Thank you again for everything 1 Quote Link to comment Share on other sites More sharing options...
gmrhodes13[Staff] Posted February 4, 2023 Report Share Posted February 4, 2023 Congratulations once again trooper 1 Quote Link to comment Share on other sites More sharing options...
Nairy[Staff] Posted February 4, 2023 Report Share Posted February 4, 2023 Congrats Ardeshir! 1 Quote Link to comment Share on other sites More sharing options...
equuspolo[TK] Posted February 4, 2023 Author Report Share Posted February 4, 2023 Thank you guys very much Quote Link to comment Share on other sites More sharing options...
Chemi[Staff] Posted February 5, 2023 Report Share Posted February 5, 2023 Congratulations Ardeshir!!! 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.