Galton[TK] Posted October 20, 2022 Report Posted October 20, 2022 (edited) TK-28823 Requesting ANH (Stunt) EIB Status -Troopermaster Trooper Info Name: Ho Kam Wah FISD Forum Name: Galton Legion ID: 28823 Garrison: Hong Kong Garrison Legion Profile: https://www.501st.com/members/displaymemberdetails.php?userID=35677 Height: 179 cm Weight: 200 lbs Costume Information Armor Maker: Troopermaster Helmet Maker: Troopermaster Neck seal: East Asia Supply Belt: Troopermaster Holster: Troopermaster Boots: Imperial Boots E-11 Blaster: TrooperBay rubber cast Edited October 20, 2022 by Galton Quote
Galton[TK] Posted October 20, 2022 Author Report Posted October 20, 2022 (edited) Helmet Edited October 20, 2022 by Galton 1 Quote
Galton[TK] Posted October 20, 2022 Author Report Posted October 20, 2022 (edited) STRAPPING Edited October 20, 2022 by Galton Quote
Galton[TK] Posted October 20, 2022 Author Report Posted October 20, 2022 (edited) Ab Plate details: Edited October 20, 2022 by Galton Quote
Galton[TK] Posted October 20, 2022 Author Report Posted October 20, 2022 Neck Seal: Boots:THERMAL DETONATOR: E-11 BLASTER: Quote
justjoseph63[Staff] Posted October 20, 2022 Report Posted October 20, 2022 Hi Galton, and THANKS for your submission for ANH Stunt Expert Infantry! That is an awesome looking set of armor there, sir, but unfortunately there is an issue you need to correct before we can get started. The control panel (raised rectangle) on your TD is similar to those used in ROTJ and will need to be changed to the ANH version. I know your armor is TM and they certainly make an ROTJ version of the TD plate, but I have never seen the particular one you are using. It's kind of odd that the round "washer" at the top is correct for ANH, but not the rectangular area. Yours ROTJ (screen used) TM ROTJ TD plate ANH screen used TM ANH TD plate Also, please post up some detail pics of your bucket as seen below- As soon as you get this sorted please post up some new photos: Suited up (rear shot) and a close up of the new plate so that we can move ahead and get that EI badge under your name. Thanks!! 2 Quote
Galton[TK] Posted October 21, 2022 Author Report Posted October 21, 2022 (edited) 18 hours ago, justjoseph63 said: Hi Galton, and THANKS for your submission for ANH Stunt Expert Infantry! That is an awesome looking set of armor there, sir, but unfortunately there is an issue you need to correct before we can get started. The control panel (raised rectangle) on your TD is similar to those used in ROTJ and will need to be changed to the ANH version. I know your armor is TM and they certainly make an ROTJ version of the TD plate, but I have never seen the particular one you are using. It's kind of odd that the round "washer" at the top is correct for ANH, but not the rectangular area. Yours ROTJ (screen used) TM ROTJ TD plate ANH screen used TM ANH TD plate Also, please post up some detail pics of your bucket as seen below- As soon as you get this sorted please post up some new photos: Suited up (rear shot) and a close up of the new plate so that we can move ahead and get that EI badge under your name. Thanks!! Hi Joseph, Thanks very much your comment, I will upload helmet photo first, thermal detonator will be upload latter. Edited October 21, 2022 by Galton 1 Quote
justjoseph63[Staff] Posted October 21, 2022 Report Posted October 21, 2022 Perfect! Thanks for those, and I look forward to seeing the updated photos with the new TD plate! 1 Quote
Galton[TK] Posted October 21, 2022 Author Report Posted October 21, 2022 THERMAL DETONATOR: I obtained a surplus detonator from a HKG teammate to replace the ROTJ one today. 2 Quote
Nairy[Staff] Posted October 21, 2022 Report Posted October 21, 2022 7 minutes ago, Galton said: THERMAL DETONATOR: I obtained a surplus detonator from a HKG teammate to replace the ROTJ one today. Wow that was fast! Troopers helping troopers indeed! : 1 Quote
Galton[TK] Posted October 21, 2022 Author Report Posted October 21, 2022 51 minutes ago, Nairy said: Wow that was fast! Troopers helping troopers indeed! : This is the way 1 Quote
Chemi[Staff] Posted October 23, 2022 Report Posted October 23, 2022 Hello Galton. Thank you for your application. In order to proceed, we will need a photo of this part: -Cod and posterior plate connections showing rivet/snaps (exterior/interior). Something like this: Ext. Int. Thanks! 1 Quote
Galton[TK] Posted October 23, 2022 Author Report Posted October 23, 2022 6 hours ago, Chemi said: Hello Galton. Thank you for your application. In order to proceed, we will need a photo of this part: -Cod and posterior plate connections showing rivet/snaps (exterior/interior). Something like this: Ext. Int. Thanks! Hi Chem, Thanks for your review, i am sorry about forgot upload photo the part of plate connections. On 10/20/2022 at 11:34 PM, jsilvius said: Quote
Galton[TK] Posted October 24, 2022 Author Report Posted October 24, 2022 (edited) 14 hours ago, Chemi said: Hello Galton. Thank you for your application. In order to proceed, we will need a photo of this part: -Cod and posterior plate connections showing rivet/snaps (exterior/interior). Something like this: Ext. Int. Thanks! Hi Chemi, I am sorry the late photo. Edited October 24, 2022 by Galton 2 Quote
Chemi[Staff] Posted October 26, 2022 Report Posted October 26, 2022 Hi Galton, and THANKS for your submission for ANH Stunt EI! CRL and EIB Application Requirements: All required photos have been submitted, and on behalf of the entire D.O. staff we are pleased to welcome you to the rank of Expert Infantry. Congratulations! Other-Armor Fit/Assembly; In this area we review observations made by your fellow troopers and the DO team. Some observations may lead to suggestions to improve the overall look of your armor, and please keep in mind that we consider both text (CRL) and pictures (screen caps/reference images) when reviewing submissions. Congratulations Galton. You have a great looking suit of armor. We're just going to add a few things that will make it definitely PERFECT. Let's start with the helmet. - This is a very common issue.. The screws on the ears should ideally align with the rear angle of the trap above them, and the bottom should angle back a little bit more. The right ear could be improved a little. The left ear is perfect. Reference images -Your helmet seems to be riding a little high. Maybe you have too much padding on the top. You could remove a little of that padding. so the helmet will lower a little. Reference images - You could try to get a better arch in your straps with a hot water bath....Doing this would allow them to ride closer to the back plate so they won't protrude out, and put less strain on the elastic strap. You will also prevent them from getting caught on something and breaking. Reference images -One small dressing issue here. The right forearm is a little high than the left. It's very little, but if you lower it you'll avoid the bite in the back. Front Back Reference image -Ideally the screws of the TD should sit closer to the ends of the clips. Reference images -For a better look, we recommend trimming the edge on both sides of the sniper knee, so that it is aligned with the "bottom edge" and looks more screen-accurate. Very easy fix!!! Reference images -Also, some strap, Velcro or similar is sticking out . You can cut it or bend it inward so that it is not visible. Reference images Centurion Requirements: In this section we prepare you for our highest tier of approval. Because Centurion photos must show more detail than EIB, items pertaining to Level 3 might be seen there and not here and additional photos may be required. We try to point out all that we can from what we are able to clearly see, but the final accuracy is the responsibility of the trooper. -L3. Abdominal and Kidney Plate align horizontally at top. In another photo (you can see it in the next point), the position was correct. You may just need to tighten the straps a bit to prevent it from moving. . Reference images -L3. Ideally there no gap between the abdomen and kidney armor. The gap is minimal. Just tighten the belt a little bit and you're done Reference images -L3. The top of the ABS ammo belt should sit at or just above the bottom of the central and vertical abdomen button panels. Many people put some Velcro on the rear of the belt to prevent it from moving down. Reference images - L3. T-tracks and grips shall be of a black plastic appearance with no silver/metallic weathering allowed. There appears to be some weathering on the grip. A coat of black paint and it' s done. Reference images And that's all Galton. A few minor easy fixes and your armor will be ready for the Centurion request. You can request your EIB Certificate HERE 1 Quote
TKSpartan[Staff] Posted October 26, 2022 Report Posted October 26, 2022 Congratulations Trooper!!! Welcome to EIB ranks. 1 Quote
giskard8[Staff] Posted October 26, 2022 Report Posted October 26, 2022 Congratulations Trooper! Welcome to the ranks. 1 Quote
Galton[TK] Posted October 26, 2022 Author Report Posted October 26, 2022 Dear Chemi, I am very gratefully the DO team approval my EIB requesting and suggested fixes for upgrade to the centurion requirements tips, thanks again 2 Quote
gmrhodes13[Staff] Posted October 26, 2022 Report Posted October 26, 2022 Congratulations trooper and welcome to the EI ranks and Expert Infantry Honor gallery 1 Quote
Galton[TK] Posted October 27, 2022 Author Report Posted October 27, 2022 3 hours ago, gmrhodes13 said: Congratulations trooper and welcome to the EI ranks and Expert Infantry Honor gallery Hi Glen, Thanks for your photo 1 Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.