Georgia Haywood[TK] Posted May 9, 2022 Report Posted May 9, 2022 First/last name: Georgia Haywood Garrison/Squad/Outpost: Outpost 42 New Zealand Garrison Armor = Rs Propmasters full commission Helmet= Rs Propmasters Blaster= Rs Propmasters Boots = Imperial Boots Canvas belt = Rs Propmasters Hand Plates = Rs Propmasters Neck Seal = Rs Propmasters Holster = Rs Propmasters Height = 5'3 Weight = 55kg [Expert Infantry Request Thread URL] Thank you for your recommendations for the changes I needed to make before applying for Centurion! 1. Front 1b. Front without helmet 2. Back Shoulder strap close-up 3. Left 4. Right 5. Left detail 6. Right detail 7. Action shot 8. Abdomen 9. Cod 10. Interior strapping 11. Wrists Extra Photos (not numbered in the initial list of photos, but shown in the example afterward) Extra 1: Sniper knee Extra 2: Thigh Ammo Belt 12. Helmet front Extra: S-shaped trim 13. Helmet left 14. Helmet right 15. Helmet back 16. Lens color 17. Hovi tips 18. Neck seal 19. Detonator 20. Holster attachment 21. Belt 22. Boots 23. Gloves 24. Gun left 25. Gun right 26. Gun back Quote
TKSpartan[Staff] Posted May 9, 2022 Report Posted May 9, 2022 Hi Georgia, thanks for your Centurion submission. Added to the processing line. 2 Quote
revlimiter[Staff] Posted May 9, 2022 Report Posted May 9, 2022 Looking fantastic! Good luck Georgia! 1 Quote
Deployment Officer Team[Staff] Posted May 17, 2022 Report Posted May 17, 2022 Hi Georgia We apologize for the delay in reviewing your Centurion application, but unfortunately we cannot proceed and get that Centurion badge under your name until all the L3 requirements are met. Please post up the updated photos and we will get right on it! These are the things (as listed in your E.I. review) that need to be corrected so that we can move along.... 1. The corners of the plastic ammo belt shall be trimmed at a 45 degree angle that that meets the outer edge of the cloth belt. Also, drop boxes should be vertically aligned with the end of the ammo belt with minimal gap between belt and box. Reference images 2. The top of the ABS ammo belt should sit at or just above the bottom of the central and vertical abdomen button panels. Reference images 3. The back was overlapping your kidney quite a bit, so it looks like you have lowered the kidney. This has caused the back plate to go too low, covering the upper thighs. The bottom of the back needs to be trimmed (no return edge, like Luke's,). Thus, the back plate can be raised a little and everything will return to its correct place. E.I. app Centurion app Reference image No return edge(Luke´s) 4. In your E.I. app the cover strips on the thighs were perfect. However, in the new app the right one is facing to the side. We need new photos where the cover strip is correctly positioned... E.I. app Centurion app Reference image 5. We also need you to include an updated close-up photo of the of the ab/kidney connection (no belt, and without overlapping ). Something like this... That's all Georgia...We know it's a little extra work, but we're confident that you'll be able to make all these fixes, and thus get the Centurion badge under your name. 4 Quote
justjoseph63[Staff] Posted May 18, 2022 Report Posted May 18, 2022 You can do this, Georgia! If you need any help, please feel free to contact us. 1 Quote
Georgia Haywood[TK] Posted May 18, 2022 Author Report Posted May 18, 2022 23 hours ago, Deployment Officer Team said: Hi Georgia We apologize for the delay in reviewing your Centurion application, but unfortunately we cannot proceed and get that Centurion badge under your name until all the L3 requirements are met. Please post up the updated photos and we will get right on it! These are the things (as listed in your E.I. review) that need to be corrected so that we can move along.... 1. The corners of the plastic ammo belt shall be trimmed at a 45 degree angle that that meets the outer edge of the cloth belt. Also, drop boxes should be vertically aligned with the end of the ammo belt with minimal gap between belt and box. Reference images 2. The top of the ABS ammo belt should sit at or just above the bottom of the central and vertical abdomen button panels. Reference images 3. The back was overlapping your kidney quite a bit, so it looks like you have lowered the kidney. This has caused the back plate to go too low, covering the upper thighs. The bottom of the back needs to be trimmed (no return edge, like Luke's,). Thus, the back plate can be raised a little and everything will return to its correct place. E.I. app Centurion app Reference image No return edge(Luke´s) 4. In your E.I. app the cover strips on the thighs were perfect. However, in the new app the right one is facing to the side. We need new photos where the cover strip is correctly positioned... E.I. app Centurion app Reference image 5. We also need you to include an updated close-up photo of the of the ab/kidney connection (no belt, and without overlapping ). Something like this... That's all Georgia...We know it's a little extra work, but we're confident that you'll be able to make all these fixes, and thus get the Centurion badge under your name. Thank you! I will do my best to carry out these adjustments 2 Quote
justjoseph63[Staff] Posted May 18, 2022 Report Posted May 18, 2022 AWESOME to hear.. looking forward to seeing the updated pics, Trooper! 1 Quote
Georgia Haywood[TK] Posted May 18, 2022 Author Report Posted May 18, 2022 14 hours ago, justjoseph63 said: You can do this, Georgia! If you need any help, please feel free to contact us. Thank you! I do have a question, what would be the best way to trip the backplate? And what tools should I use? Thanks again! Quote
gmrhodes13[Staff] Posted May 18, 2022 Report Posted May 18, 2022 21 minutes ago, Georgia Haywood said: Thank you! I do have a question, what would be the best way to trip the backplate? And what tools should I use? Thanks again! A few threads which may be helpful, some trimming and reworking pieces https://www.whitearmor.net/forum/topic/38416-crickets-rs-stunt-build-for-the-vertically-challenged/ https://www.whitearmor.net/forum/topic/38842-fragarocks-rs-stunt-build-not-to-scale/ https://www.whitearmor.net/forum/topic/42868-sha-shas-wtf-anh-stunt-build-complete/ 1 Quote
Mworm1974[TK] Posted May 28, 2022 Report Posted May 28, 2022 Almost there, keep up the good work and you’ll be a centurion soon, however, take your time with those mods and remember what comes off can’t go back on easily. Look up crickets or frag rocks builds they had some back plate modifications that may help. Quote
TKSpartan[Staff] Posted September 26, 2022 Report Posted September 26, 2022 Hi Georgia, Any progress on this? let us know any questions or assistance. Quote
Nairy[Staff] Posted September 29, 2022 Report Posted September 29, 2022 Almost there! Keep up the good work trooper! Quote
justjoseph63[Staff] Posted October 22, 2022 Report Posted October 22, 2022 Hi Georgia. Due to the delay in any movement on this submission we are considering it inactive. If you would like to continue, please get in touch with any member of the D.O. staff and we will be happy to get the ball rolling again. Thanks! Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.