equuspolo[TK] Posted January 15, 2022 Report Posted January 15, 2022 (edited) Name: Ardeshir Radpour Username: equuspolo TK-42128 Southern California Garrison Los Angeles Squadron Height = 5'10 Weight = 165 Armor Maker = KB Armor - Trimmed to fit like Anovos Helmet Maker = Anovos Premium Fiberglass and Anovos Plastic Helmet Boot Maker = Imperial Boots Gloves = Endor Finders Belt = Trooperbay Belt Pouches = Trooperbay Pauldron = Trooperbay Neck Seal = Imperial Seamstress Holster Maker = Dan Sczudlik Gaskets = production made silicon rubber gaskets F-11 = Branfuhr Studios Resin Kit- Custom built by me with custom light system. SE-44C = 3DPrintMerchant Electronics = Wireless Microphone with Acker Amp Custom Parts = Chest yoke and Backplate welded together with ABS Slurry. Chest Pills and Chest cut out backed with Textured Fabric, TD slurry welded. Entire armor painted with Rustoleum 2x Glossy White. Belt, Cod, Butt Plate attached to armer with Anovos leather waist tassets EIB Approved FIBERGLASS HELMET PLASTIC HELMET updated blaster Edited January 30, 2022 by equuspolo 4 Quote
Sly11[Admin] Posted January 15, 2022 Report Posted January 15, 2022 Beautiful application brother! 1 Quote
justjoseph63[Staff] Posted January 15, 2022 Report Posted January 15, 2022 As per usual (and to echo Andrew's comment) this is one fantastic submission, brother (not that I expected any less from you)! You are in the queue, sir! 1 Quote
revlimiter[Staff] Posted January 15, 2022 Report Posted January 15, 2022 Dank Farrik, this is gorgeous. Good luck!!! Though I don't think you'll need it. 1 Quote
equuspolo[TK] Posted January 15, 2022 Author Report Posted January 15, 2022 4 hours ago, Sly11 said: Beautiful application brother! Thank you so much. Appreciate it beyond words Quote
equuspolo[TK] Posted January 15, 2022 Author Report Posted January 15, 2022 3 hours ago, justjoseph63 said: As per usual (and to echo Andrew's comment) this is one fantastic submission, brother (not that I expected any less from you)! We will be with you as soon as possible, sir! Appreciate the amazing compliment and encouragement and guidance as always. Thank you so much. Appreciate it immensely Quote
equuspolo[TK] Posted January 15, 2022 Author Report Posted January 15, 2022 3 hours ago, revlimiter said: Dank Farrik, this is gorgeous. Good luck!!! Though I don't think you'll need it. Thank you very very much. Appreciate the kind words Quote
Chemi[Staff] Posted January 15, 2022 Report Posted January 15, 2022 Hi Ardeshir... I want to congratulate you for this fantastic submission... I've received messages from members of my Garrison, who are impressed with your submission. Congratulations. We're working on it... 1 Quote
equuspolo[TK] Posted January 15, 2022 Author Report Posted January 15, 2022 1 hour ago, Chemi said: Hi Ardeshir... I want to congratulate you for this fantastic submission... I've received messages from members of my Garrison, who are impressed with your submission. Congratulations. We're working on it... Wow thank you very much for such an amazing compliment. Means a lot to hear that. Appreciate all the encouragement as always. Thank you Quote
TKSpartan[Staff] Posted January 15, 2022 Report Posted January 15, 2022 Hey Ardeshir ! great to see you're back for Centurion !! 1 Quote
equuspolo[TK] Posted January 15, 2022 Author Report Posted January 15, 2022 1 hour ago, TKSpartan said: Hey Ardeshir ! great to see you're back for Centurion !! Thank you brother. This and the executioner are both up with all the changes requested made. It was always the plan just got delayed a bit by excellent personal things going on hahaha. 1 Quote
Aradun[TK] Posted January 16, 2022 Report Posted January 16, 2022 Love your work Ardeshir! Your attention to detail is unsurpassed as are your submission photos! Looking forward to congratulating you (again and again on your Executioner app)! 1 Quote
equuspolo[TK] Posted January 17, 2022 Author Report Posted January 17, 2022 11 hours ago, AradunFF said: Love your work Ardeshir! Your attention to detail is unsurpassed as are your submission photos! Looking forward to congratulating you (again and again on your Executioner app)! Appreciate it beyond words. What a compliment. I hope I can live up to it. Appreciate it my friend. Super humbled by your compliment. Thank you 1 Quote
Chemi[Staff] Posted January 20, 2022 Report Posted January 20, 2022 Hello Ardeshir. Thank you for your patience. As you have seen in your Executioner application, we noticed that the picatinny rail is a bit long, should only have 2 raised sections (ribs) in the center and the holes are close to the ends as seen in the reference images below. Reference images -The D-ring you presently have is an actual D-shape as opposed to a more square shape. Reference image We believe that these two issues must be corrected before we can grant you your 7th Centurion. We know this is a big issue, but we also know that you are a perfectionist, that you like to take care of details and that you are a very professional person. Also, we know that you have first hand information, so if you have any questions or complaints, you know you can contact us @Deployment Officer Team. Thank you very much Ardeshir! 1 Quote
equuspolo[TK] Posted January 20, 2022 Author Report Posted January 20, 2022 13 minutes ago, Chemi said: Hello Ardeshir. Thank you for your patience. As you have seen in your Executioner application, we noticed that the picatinny rail is a bit long, should only have 2 raised sections (ribs) in the center and the holes are close to the ends as seen in the reference images below. Reference images -The D-ring you presently have is an actual D-shape as opposed to a more square shape. Reference image We believe that these two issues must be corrected before we can grant you your 7th Centurion. We know this is a big issue, but we also know that you are a perfectionist, that you like to take care of details and that you are a very professional person. Also, we know that you have first hand information, so if you have any questions or complaints, you know you can contact us @Deployment Officer Team. Thank you very much Ardeshir! Not a problem at all hahaha I already ordered the parts. 3 Quote
Chemi[Staff] Posted January 20, 2022 Report Posted January 20, 2022 hace 8 minutos, equuspolo dijo: Not a problem at all hahaha I already ordered the parts. Great news!!!... 1 Quote
justjoseph63[Staff] Posted January 21, 2022 Report Posted January 21, 2022 18 hours ago, equuspolo said: Not a problem at all hahaha I already ordered the parts. Why does this not surprise me? You are an ANIMAL when it comes to builds, brother. I am constantly amazed every time I see one of your new ones, and I always wonder what the next one will be! 1 Quote
gmrhodes13[Staff] Posted January 21, 2022 Report Posted January 21, 2022 Also note when searching for the picatinny rail, between the holes they are angled cut, I've managed to find them on Aliexpress in the past. 1 Quote
equuspolo[TK] Posted January 21, 2022 Author Report Posted January 21, 2022 10 hours ago, justjoseph63 said: Why does this not surprise me? You are an ANIMAL when it comes to builds, brother. I am constantly amazed every time I see one of your new ones, and I always wonder what the next one will be! Thank you brother. Hahaha appreciate it Quote
equuspolo[TK] Posted January 21, 2022 Author Report Posted January 21, 2022 (edited) So here are rhe requested changes and I’m uploading it the body for reference as well Edited January 21, 2022 by equuspolo Quote
equuspolo[TK] Posted January 21, 2022 Author Report Posted January 21, 2022 On 1/20/2022 at 8:47 AM, Chemi said: Great news!!!... Done Quote
equuspolo[TK] Posted January 24, 2022 Author Report Posted January 24, 2022 On 1/22/2022 at 10:35 AM, justjoseph63 said: Hi Ardeshir! As seen in the images below, the picatinny rail on your FD11 is close (first photo), but still not quite what we need to get you approved. Although not specifically mentioned in the CRL, this is one of those items that since there are multiple screen references we must insist on. Example Reference images There are lots of suppliers of the correct version as seen on AliExpress (example here) but sadly shipping/delivery time is up to 2-3 months. Ouch. I doubt that you want to wait that long (I know I wouldn't) but here are some options: If you can find a good 3D designer, you could have one made/printed. I can't seem to find a resin or 3D one anywhere, even on Etsy. OR, if you would be willing to send me the rail you have, I will use it as a template to make you the correct one. All you would have to do is send it to me via Priority Mail this Monday the 24th (I move to FL. on the 29th). I will sculpt a new one, make a silicone mold, cast it in black resin and send it to you along with your original (unaltered). I have quite a bit of experience making greebs and such as seen here and here, so you can trust me to get it right. There would be no charge for my services/supplies. Heck, I will even pay for return shipping to you, and you should have it in about 8-10 days from when I receive the original. I can promise you that it will be 100% approvable, and since it would be my own sculpt there are no recasting issues. The reasons I am offering this are that I know you are a fellow accuracy nut, and since these things seem to be difficult to source without paying 15 bucks or more and waiting for ages, this way I can supply them to anyone who needs one in the future right away and at my cost (probably a dollar + shipping). I know you want to get that TLJ Centurion badge under your ABS belt (we want you to as well) but I hope you can appreciate our position. If you would like me to make you this part, just PM me this weekend and I'll shoot you my address. Thanks for both your patience and understanding! Just had this made. Want to check with you about it before I finish it up. https://imgur.com/NhWdtWX Quote
equuspolo[TK] Posted January 24, 2022 Author Report Posted January 24, 2022 On 1/22/2022 at 10:35 AM, justjoseph63 said: Hi Ardeshir! As seen in the images below, the picatinny rail on your FD11 is close (first photo), but still not quite what we need to get you approved. Although not specifically mentioned in the CRL, this is one of those items that since there are multiple screen references we must insist on. Example Reference images There are lots of suppliers of the correct version as seen on AliExpress (example here) but sadly shipping/delivery time is up to 2-3 months. Ouch. I doubt that you want to wait that long (I know I wouldn't) but here are some options: If you can find a good 3D designer, you could have one made/printed. I can't seem to find a resin or 3D one anywhere, even on Etsy. OR, if you would be willing to send me the rail you have, I will use it as a template to make you the correct one. All you would have to do is send it to me via Priority Mail this Monday the 24th (I move to FL. on the 29th). I will sculpt a new one, make a silicone mold, cast it in black resin and send it to you along with your original (unaltered). I have quite a bit of experience making greebs and such as seen here and here, so you can trust me to get it right. There would be no charge for my services/supplies. Heck, I will even pay for return shipping to you, and you should have it in about 8-10 days from when I receive the original. I can promise you that it will be 100% approvable, and since it would be my own sculpt there are no recasting issues. The reasons I am offering this are that I know you are a fellow accuracy nut, and since these things seem to be difficult to source without paying 15 bucks or more and waiting for ages, this way I can supply them to anyone who needs one in the future right away and at my cost (probably a dollar + shipping). I know you want to get that TLJ Centurion badge under your ABS belt (we want you to as well) but I hope you can appreciate our position. If you would like me to make you this part, just PM me this weekend and I'll shoot you my address. Thanks for both your patience and understanding! Just had this made. Want to check with you about it before I finish it up. 2 Quote
justjoseph63[Staff] Posted January 24, 2022 Report Posted January 24, 2022 PERFECT! Can I ask where you got the file for that? Thanks! 1 Quote
equuspolo[TK] Posted January 24, 2022 Author Report Posted January 24, 2022 4 hours ago, justjoseph63 said: PERFECT! Can I ask where you got the file for that? Thanks! Had a friend print it up Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.