Dsposato0[TK] Posted September 17, 2021 Report Posted September 17, 2021 (edited) Mandatory Information Costume = Stormtrooper, A New Hope (Stunt) Costume CRL Link = https://databank.501st.com/databank/Costuming:TK_anh_stunt Name = Dwight S. TK ID = 62345 Forum Name = Dsposato0 Legion Profile = https://www.501st.com/members/displaymemberdetails.php?userID=29425 Garrison/Squad = Southern California Garrison, Orange County Squad Armor = Anovos Helmet = Anovos (mic tips from ukswrath, ear hardwear from justjoseph63, cooling from Henry's Helmet Fans) Optional Information Height = 5ft 11in, or 180cm Weight = 170lbs, or 77kg Boots = Imperial Boots Canvas Belt = Imperial Issue Holster = Anovos Hand Plates = flexible latex from justjoseph63 Gloves = Double1 Rubber chemical gloves Neck Seal = Anovos Strapping = RascalSnaps Blaster = Hellhounds E-11 Optional Information Height = 5ft 11in, or 180cm Weight = 170lbs, or 77kg Boots = Imperial Boots Canvas Belt = Imperial Issue Holster = Anovos Hand Plates = flexible latex from justjoseph63 Gloves = Double1 Rubber chemical gloves Neck Seal = Anovos Strapping = RascalSnaps Blaster = Hellhounds E-11 Armor Photos Helmet Off (not adjusted) Full Body Front Full Body Back Full Body Right Full Body Left Action Shot Helmet Detail Photos Front Back Left Right Interior S-trim Detail Vocoder and Hovi Mic Tip Detail (ukswrath mic tips) Lens Color (Green, backlit) Accessory Photos Neckseal Thermal Detonator (justjoseph63 slotted, pan head style screws) Ammo Belt Boots Blaster Optional Photos Interior Strapping Abdomen Detail Cod to Posterior Strapping Detail (2 snaps, split rivet) Rubber Gloves & Handguards (flexible latex from justjoseph63, glued) Sniper Knee Attachment (glue) Thigh Ammo Pack Attachment (split rivets) Holster Attachment Detail (2 Chicago screws) Belt Box Back Detail (fully closed) Wrist Return Edge Detail (none present) Right Ab (Han) Snap Detail Left Side Detail (split rivets) Shoulder Bridge Attachment (glued front, free-floating with elastic tiedown rear) Thank you for looking, and I appreciate your feedback! Edited September 17, 2021 by Dsposato0 3 Quote
CallMeMrTibbles[501st] Posted September 17, 2021 Report Posted September 17, 2021 Good luck with it Dwight 1 Quote
Dsposato0[TK] Posted September 17, 2021 Author Report Posted September 17, 2021 Thank you sir!! 1 Quote
TheRascalKing[TK] Posted September 17, 2021 Report Posted September 17, 2021 YEABUDDY, you got this! Quote
TKSpartan[Staff] Posted September 17, 2021 Report Posted September 17, 2021 Good luck Trooper !! one of us will be with you shortly. Btw @TheRascalKing that fence looks familiar 1 Quote
TheRascalKing[TK] Posted September 17, 2021 Report Posted September 17, 2021 1 hour ago, TKSpartan said: Good luck Trooper !! one of us will be with you shortly. Btw @TheRascalKing that fence looks familiar You know it - Dwight is in my Squad, one of my mentees, and a good friend, so I worked very closely with him to finish this suit on a very tight schedule after we got his Shadowtrooper L2 Specialist approved! 2 Quote
TKSpartan[Staff] Posted September 18, 2021 Report Posted September 18, 2021 28 minutes ago, TheRascalKing said: You know it - Dwight is in my Squad, one of my mentees, and a good friend, so I worked very closely with him to finish this suit on a very tight schedule after we got his Shadowtrooper L2 Specialist approved! Great!! Quote
justjoseph63[Staff] Posted September 20, 2021 Report Posted September 20, 2021 Hi Dwight! Thanks so much for your patience, and awesome job on this armor! After looking things over we have one small item we need you to jump on before we can finish up your review, sir. As per the CRL for Basic approval: Frown is painted gray and does not leave the teeth area. As seen below, the paint on some of the teeth will need to be dialed back a bit to where it doesn't reach into the "gum" area. I call it the "Anovos overspray", and everyone (myself included) who has one of their buckets had the same exact issue. It should take you all of 10 minutes with some Q-tips, a toothpick and some (non acetone) paint remover, and I'm sure Justin will be happy to help if you need it! Reference images As soon as you get this done please post a few pics so that we can "move along", get that badge under your name and add another EI to the SCG! 2 Quote
TheRascalKing[TK] Posted September 21, 2021 Report Posted September 21, 2021 On 9/20/2021 at 5:12 AM, justjoseph63 said: Hi Dwight! Thanks so much for your patience, and awesome job on this armor! After looking things over we have one small item we need you to jump on before we can finish up your review, sir. As per the CRL for Basic approval: Frown is painted gray and does not leave the teeth area. As seen below, the paint on some of the teeth will need to be dialed back a bit to where it doesn't reach into the "gum" area. I call it the "Anovos overspray", and everyone (myself included) who has one of their buckets had the same exact issue. It should take you all of 10 minutes with some Q-tips, a toothpick and some (non acetone) paint remover, and I'm sure Justin will be happy to help if you need it! Reference images As soon as you get this done please post a few pics so that we can "move along", get that badge under your name and add another EI to the SCG! I reeeeeeeally don't get the obsession with this at EIB. Yes, many or even most frowns were pretty restrained but there were plenty that look just like his in my opinion... Still, potentially an easy fix... "¯\(ツ)/¯" 1 Quote
justjoseph63[Staff] Posted September 22, 2021 Report Posted September 22, 2021 As you know, in many (if not most) cases there are always exceptions to the "norm", especially in OT armor (i.e. Mr. No Stripes). The teeth paint issue is one we have addressed for as long as I have been a D.O (almost 5 years) and since it is listed as a requirement for Basic approval we have to enforce it for EI. Frown is painted gray and does not leave the teeth area. Unlike the MEPD we don't choose a particular Trooper to copy for higher levels of approval, but rather the "ideal" look. 5 Quote
Oztrooper[TK] Posted November 28, 2021 Report Posted November 28, 2021 On 9/22/2021 at 5:06 AM, justjoseph63 said: As you know, in many (if not most) cases there are always exceptions to the "norm", especially in OT armor (i.e. Mr. No Stripes). The teeth paint issue is one we have addressed for as long as I have been a D.O (almost 5 years) and since it is listed as a requirement for Basic approval we have to enforce it for EI. Frown is painted gray and does not leave the teeth area. Unlike the MEPD we don't choose a particular Trooper to copy for higher levels of approval, but rather the "ideal" look. I concur with Joseph...the Anovos frown paint is very thin...so thin that I just wet my fingernails and drag in the direction I want the paint removed...might take me 30 mins to clean up the "fog" around the frown paint.. 2 Quote
Dsposato0[TK] Posted December 16, 2021 Author Report Posted December 16, 2021 Frown has been fixed. Let me know if this works for EIB status. 2 Quote
justjoseph63[Staff] Posted December 16, 2021 Report Posted December 16, 2021 Perfect! I am almost done with your review posted and will get it posted very soon. Thanks for your patience! 1 Quote
justjoseph63[Staff] Posted December 18, 2021 Report Posted December 18, 2021 Hi Dwight, and thank you for your application for ANH Stunt Expert Infantry! CRL and EIB Application Requirements All required photos are now in and, after review, we are pleased to welcome you to EI! On behalf of the entire DO staff, congratulations!! Other-Armor Fit/Assembly In this area we review observations made by your fellow troopers and the DO team. Some observations may lead to suggestions to improve the overall look of your armor. Note that we consider both text (CRL) and pictures (screen caps/reference images) when reviewing submissions. Overall a great looking set of armor, sir! Just a couple of items here for ya': We are strongly suggesting that (if at all possible) you move the bottoms of the ears toward the back a bit. As of now they are sitting at about a 90° angle to the ridge/brow trim. Ideally, as seen in the reference images the angle should follow the rear angle of the trap above them, and the center of the round part at the top should sit directly below that line, hopefully covering the overlap join of the cap/faceplate. Is this a quick fix? Nope, but it should take less than 30 minutes and would give you a MUCH sharper looking bucket. Remember, it's all in the details at Centurion level. Reference images We noticed that your rear thigh cover strips are not lined up perfectly, but not to worry. The main thing we noticed is that the tops of the thighs could use a trim in the rear. You may or may not experience clicking noises when you walk from the points catching on the posterior plate, but from a comfort standpoint removing some of that will make mobility easier. Trust me. Suggested trim Reference images Centurion Requirements In this section we prepare you for Centurion. More photos may be requested in the future that allow us to make better decisions on possible adjustments. If there are any areas of concern they will be discussed here. Because Centurion photos show much more detail than EIB, items to pertaining to Centurion might be seen there and not here. We try to point out all that we can from what is seen, but the final accuracy is the responsibility of the trooper. First, don't be alarmed by all the photos below! Most are just quick painting issues, but there are a couple of items in particular that need some attention. We are asking that you take 30 seconds to tighten up the left bottom ear screw. Easy fix! Ear screws shall be slotted, flat topped, countersunk... Reference images Overall a really nice paint job on the vocoder, but we would like to see the top lines a little crisper/cleaner. A filbert style brush will make this an easy fix. Reference images A little "battle damage" is always going to happen and is expected, but for now we ask that you double-check your side rivets to make sure they are all painted for a much better look. Reference image You absolutely nailed the paint job on the large ab-button plate, but we are requesting that you touch up the sides of the ones on the smaller plate for a more rounded look. Reference images The gap in the bottom of your right thigh ridge is passable, but the left side will need to be less noticeable. An ABS shim glued behind it would take care of this nicely. If you would like to add some ABS paste (or even a little white silicone type filler) that would be even better! Reference images Last up.. you have an awesome looking blaster there, but the selector switch is missing! I know this is a small issue, but only the Bapty style E-11s did not have them (which are not permitted at L3). They are available online (example here) and will be pretty simple simple to install. Just drill a hole, glue it in and DONE! And that's it, brother! You have a little work in front of you, but we have every confidence that with your build skills (and our help if you need it) I can see a Centurion badge below your name in the very near future! YOU CAN DO IT! 1 Quote
fishgoh0nk[TK] Posted December 18, 2021 Report Posted December 18, 2021 Congrats Dwight!! Smoooooothhhhhhhh 1 Quote
giskard8[Staff] Posted December 18, 2021 Report Posted December 18, 2021 Congratulations trooper. 1 Quote
revlimiter[Staff] Posted December 18, 2021 Report Posted December 18, 2021 congratulations trooper!!! 1 Quote
Dsposato0[TK] Posted December 18, 2021 Author Report Posted December 18, 2021 Thank you so much everyone!! I am really excited. I am going to get started on the Centurion status asap! Thank you for all the feedback commanders and look forward to submitting for Centurion very soon! Quote
gmrhodes13[Staff] Posted December 18, 2021 Report Posted December 18, 2021 Congratulations trooper and welcome to the EI ranks. For future reference if you could use a full blank backdrop for your action photo it makes our job a lot easier Quote
Chemi[Staff] Posted December 19, 2021 Report Posted December 19, 2021 Congratulations trooper!!! hace 6 horas, Dsposato0 dijo: Thank you so much everyone!! I am really excited. I am going to get started on the Centurion status asap! Thank you for all the feedback commanders and look forward to submitting for Centurion very soon! Quote
Goggytalks[TK] Posted December 19, 2021 Report Posted December 19, 2021 Congratulations Dwight on your EIB status. Don't be put off by any of the suggested adjustments to reach Centurion level. I think most of us have had to make the same adjustments, but the satisfaction you get when it passes is a great feeling. Well done . 1 Quote
Aradun[TK] Posted December 19, 2021 Report Posted December 19, 2021 Congrats Dwight and welcome to the ranks. Quote
CallMeMrTibbles[501st] Posted December 19, 2021 Report Posted December 19, 2021 Congratulations Dwight. An awesome build and well deserved recognition for your efforts Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.