Removed

[Tx51391[TK]]

Removed 

Edited July 29, 2023 by Tx51391

[Sly11[Admin]]

Just a quick observation, make sure your Butt plate is sitting nice and straight. One side has dropped down from under your belt.

As we look at the image, your right knee plate may need to be adjusted outward just a little so it is aligned.

Other's will chime in but you look great, so i wish you good luck.

[CallMeMrTibbles[501st]]

Looking great.
Good luck with your clearance

[gmrhodes13[Staff]]

Nice work, just watch the cod, it's sticking forward, perhaps slightly tighter strapping

 

Your armor is touching in a few spots and you may want to adjust, they will rub together and you will end up wearing the paint. Butt plate to top of thighs, biceps to forearms

 

And watch the positioning of your belt pouches, large is on an angle

 

You may also want to provide images showing your forearm box details are on the right sides, many forget that detail  

 

Once again nice work and good luck with approval

[Tx51391[TK]]

Thank you for the feedback! I put a strap between my legs for the cod.  I was concerned about the butt rubbing against the thighs so I have a strip of foam there creating a barrier.  Ill make sure to pull up the butt so its straight with the belt as well, possibly velcro to help the alignment ?

[gmrhodes13[Staff]]

Velcro may help keep the belt in place, I have 4 snaps along the back of the belt which keeps mine in place, same on the front. 

[starsaber25[Admin]]

Well thanks for making this a lot easier on me!