ticopowell[TK] Posted July 9, 2020 Report Posted July 9, 2020 (edited) Caleb Powell Armor maker RS Props Helmet maker RS Props Blaster maker RS Props Cloth belt maker RS Props Neck seal maker Darmans props Boot maker Imperial Boots Height 6', 72", 182 cm Weight 205lb ish... Hand Plates RS Props, rubberized Electronics ukswrath hovi mic speakers, icomm, and amp setup Holster Local squad member, Mike Ford Armor Photos Full Body Front Full Body Back Full Right Full Left Right Side Detail Left Side Detail Helmet Detail Photos Front Side ] Back Hovi tip detail Lens color (Backlit if necessary) Accessory Photos Ammo belt Neckseal Blaster left side Blaster right side Thermal detonator back Action Shot Interior Strapping Abdomen Detail Boots Other pertinent photos not included in the guide, but frequently requested. Thanks for looking, Let me know what needs to be fixed! Edited July 9, 2020 by ticopowell picture fix 1 Quote
TKSpartan[Staff] Posted July 9, 2020 Report Posted July 9, 2020 Great Caleb !! One of us will be with you shortly. 1 Quote
gmrhodes13[Staff] Posted July 9, 2020 Report Posted July 9, 2020 Nice work trooper, if I was going to tweak anything it would be to try to even out your brow trim, looks a little lopsided. You have a lot of black showing around the wrists so I would try to bring your biceps and forearms down a little. Also match up the gaps between your shoulder bells, one is a little closer Great work and good luck with EI approval 2 Quote
ticopowell[TK] Posted July 9, 2020 Author Report Posted July 9, 2020 Thanks for the tips. I'm guessing that shoulder is out because the snap broke, so that shouldn't be an issue now. Ill check it when I get a chance. That brow has been nothing but trouble lately, Ill get it sorted out as well :). The Biceps need to stay where they are per the GML, so Ill likely need to lower the forearms down a half inch to an inch to cover that gap, but to not open one up too much around the elbow. Here are before and after pics from the original submission vs EIB. Original EIB Looks like my arms are a bit too long compared to an original TK 1 Quote
TKSpartan[Staff] Posted July 9, 2020 Report Posted July 9, 2020 Tico, could you please add the following photos mean while the D.O. Team assigns your application? Helmet Right side Close-up of kidney/ab plate connection left side to see the 3 rivets ,(not need to suit up) Thank you ! Quote
ticopowell[TK] Posted July 9, 2020 Author Report Posted July 9, 2020 Shoot, I thought those were in there. Here ya go 2 Quote
TKSpartan[Staff] Posted July 9, 2020 Report Posted July 9, 2020 1 hour ago, ticopowell said: That snap on the elastic is already fixed... only noticed it while taking the picture It would be better If you can change this photo in advance. just edit the post, delete the first one and paste the new. 1 Quote
ticopowell[TK] Posted July 9, 2020 Author Report Posted July 9, 2020 21 minutes ago, TKSpartan said: It would be better If you can change this photo in advance. just edit the post, delete the first one and paste the new. Done, I was a little excited to submit and I had pre-typed the post, so all I had to do was copy and paste, didn't even think to change that photo, just explained it lol Quote
justjoseph63[Staff] Posted July 9, 2020 Report Posted July 9, 2020 Looking great, Caleb, and NICE job on those shims! 1 Quote
MaskedVengeance[Staff] Posted July 10, 2020 Report Posted July 10, 2020 Looking good, Caleb! EIB coming your way soon! 1 Quote
Chemi[Staff] Posted July 11, 2020 Report Posted July 11, 2020 Very good work, Caleb. Good luck in your application!!! Quote
TKSpartan[Staff] Posted July 12, 2020 Report Posted July 12, 2020 Hi Caleb, and thank you for your EIB application! CRL and EIB Application Requirements: All required photos have been submitted, and on behalf of the entire D.O. staff we are pleased to welcome you to the rank of Expert Infantry. Congratulations! Other-Armor Fit/Assembly; In this area we review observations made by your fellow troopers and the DO team. Some observations may lead to suggestions to improve the overall look of your armour. Let's start from top. The brow trim of your helmet, as you can see in the reference photos, should be a little shorter. This is a very easy and fast adjustment, just be careful to do it little by little so as not to cut too much. Reference Images As you can see, the gap between your bicep and forearm is quite a bit smaller than the gap between the forearm and wrist. If you're able to drop the forearms a bit, it will help you look your best. Reference Images Moving on we have the Han-snap. It should be ideally in the top corner, currently yours is to far in and it's suggested to be moved. Reference Images Ideally, the screws of the Thermal detonator sit closer to the end of the clips. This is not a big deal and would involve replacing the clips. We consider it's worth mentioning. Reference Images As you can see, this is just a dressing issue to take care of , the left thigh is a little up and looks misaligned, Easy fix. Reference Images *************************************************** Centurion Requirements; In this section we prepare you for Centurion. Because Centurion photos show more detail than EIB, items pertaining to Centurion might be seen there and not here and additional photos may be required. We try to point out all that we can from what we see, but the final accuracy is the responsibility of the trooper. I have followed your armor build thread and I know the great work and dedication you had invested, amazing mate! In my own experience, although one tries to make everything perfect there's always a detail here and there. Looking at your front view submitted photo , we noticed that the the brow trim is riding entirely too high over the trap on the left side. We think you may be able to lower it to align and glue it in place. Reference Images Your Shoulder-Chest connection look quite good, but there is still some gap, especially at the top of the bells. You can tighten the strapping holding the bells on to bring them as close to the chest and back as possible and this will allow then to align better. Reference Images In most of the photos the drop boxes line up perfectly with the ends of the ABS belt, but you may want to add some E-6000 to the straps in the back to prevent them from shifting. Reference Images Finally brother, we noticed a small gap in the rear of your thighs. The left one is close enough, but for the right one , you could add an ABS shim behind the lower ridge to cover that gap (or fill it with ABS paste). Reference Image And here we finish Caleb, again congratulations for being part of the EIB 1000 and for such great set of armor you have built. Don't stop here Trooper, I have full confidence that you can do the fixes and go to Centurion Level!!! Pura Vida! *************************************************** 2 Quote
ticopowell[TK] Posted July 12, 2020 Author Report Posted July 12, 2020 Thanks! That's awesome, I'll get to work! Quote
gmrhodes13[Staff] Posted July 12, 2020 Report Posted July 12, 2020 Congratulations and welcome to the EI ranks trooper Quote
Chemi[Staff] Posted July 12, 2020 Report Posted July 12, 2020 Congratulations Caleb!!!! 3 or 4 easy fixes!!! Now, centurión level !!!! 1 Quote
giskard8[Staff] Posted July 14, 2020 Report Posted July 14, 2020 Congratulations trooper! Welcome to EIB. Easy fixes and go hit the next rank. 1 Quote
ukswrath[Staff] Posted July 22, 2020 Report Posted July 22, 2020 Hey Caleb sorry for the late reply, great job on your build and welcome to EI 1 Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.