Jump to content

Recommended Posts

Posted

Trying to figure out if the rom f/x comes with an amplifier and/or a microphone, or if I needed to go ahead and pick up a radio shack amp and mic anyway.

 

thanks

Posted (edited)

Try hitting -----. then Photos and sound.

It comes with everything you need.

Edited by gmrhodes13
link not working, removed gmrhodes13 2020
Posted
It comes with everything you need.

 

Except batteries... :lol:

 

For those, you can either run a single 9v battery, or the 'more power - longer running time' option of 8 x AA's

Posted (edited)
defyitall said:
Actually mine came with a battery.

Ditto.

 

The only thing I would suggest changing with the rom set up is the mic. The one that came with mine packed up after only a half dozen troops so I did what most of the UKG have done and swap it out for one of the flat mic "skype "type pc mics such as this:

 

-------

-----

as you can see, its a mod thats not going to break the bank. :D

 

If you stick with the standard 9v set up be prepared to go through a LOT of batteries. Personally I have found that once they have less than about 80% charge they will need replacing ( still good to run your helmet fans for hours though ;) ) so I will eventually be going the 12v route.

 

Having said that, I have seen most other voice amps available in use ( even owned one of the " halloween 3 voice " voice changers) and I have to say the Rom beats all comers hands down! That includes the Tricktoys. My sandie mate had one of those and it lasted 3 troops before the board broke. He now has a Rom. lol B)

Edited by gmrhodes13
link not working, removed gmrhodes13 2021
Posted
Actually mine came with a battery.

 

Dam, how times change...

 

They didn't have batteries supplied 4½ years ago... :(:D

 

As for the mic, yes as Matt said above it's one of things that does need upgrading.

 

I still have the original 1st version mic in mine, and still going strong after all these years... not sure why John replaced them TBH.

Posted

I think I was always planning on going with a headset mic so it wasn't such a big deal. I'll probably include the old mic in my old kit when I sell it to sweeten the deal.

Posted

i haven't worked up a plan for installing this, but can you run both the amp and cooling fan setup with 8-AA's?

 

also, should you enclose the romfx in a box, or is it ok as is? seems like it would be fragile.

Posted
i haven't worked up a plan for installing this, but can you run both the amp and cooling fan setup with 8-AA's?

 

also, should you enclose the romfx in a box, or is it ok as is? seems like it would be fragile.

 

Best to keep the ROM/FX on the 8xAA's and have the fan on a single 9v setup.

 

The board is a fairly robust bit of kit TBH... you get a balloon to put it in, so the moisture stays out. Mines been getting abuse for over 4 years now, and never let me down.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...