LEGOeatPokemon[TK] Posted March 27, 2020 Report Posted March 27, 2020 Here we go! Name: Jonas Andersson TK ID: 22423 Forum name: LEGOeatPokemon Garrison: Nordic Garrison Armor maker: SDS (Modified) Helmet maker: SDS (Modified) Blaster maker: SDS (Modified) Boots maker: SDS? Canvas belt: Imperial Issue Hand plates: @justjoseph63 Electronics: @ukswrath bracket fan system Neckseal type: SDS Holster maker: SDS (Modified) Full body pics: Helmet: Blaster: Holster: :TD Abdomen: Neck seal: Interior strapping: Cod to butt connection: Tell me if there any more pictures you need. 1 Quote
TKSpartan[Staff] Posted March 27, 2020 Report Posted March 27, 2020 Hi Jonas, glad to see your EIB application so soon !!! Great mate. According to the CRL, you may want to add the following photos that i'm sure the D.O. Team will surely ask you for: 1- Close photo :Right and Left ,outside and inside of your Thigh ammo pack to see the rivets type. Level two certification (if applicable): Thigh ammo belt is attached to thigh with a solid head rivet, painted white, in the upper corner and fastened to the lower thigh ridge. The rivets used shall be single cap, double cap or split rivets. No pop rivets allowed. Rivet should be approximately 5/16" (8mm) in diameter (exterior). 2- Close Photo of your Sniper Knee Right and Lef side to see alignment Level two certification (if applicable): Sniper knee plate must be aligned with the ridges on the shin. Sniper knee plate must not have visible rivets or fasteners attaching it to the shin. 3- Close Photo of your boots: Level two certification (if applicable): There is no seam present on the front of the boot. Boots have a black sole 4- Close photo of your ab section to see the ab buttons . A split (bifurcated) or single cap rivet is present on the lower tab (cod area) of the abdomen armor. Rivet does not need to be functional. Rivet on must be brass or silver in color, approximately 5/16" (8mm) in diameter and is not painted. 5- Close photo of your chest to Back plate connection to see the white fabric Chest and back shall be connected with a white fabric or preferably elastic strap at the shoulders. The D.O team will let you know of any additional photos to submit. Good luck with your approval mate!! 1 Quote
TKSpartan[Staff] Posted March 27, 2020 Report Posted March 27, 2020 Just in case Jonas. I'm not sure if it's a light ( or my old eyes) effect but the two rivets looks like be in black color? The crl states: Two male snaps are present on the lower center tab of the Posterior Armor. Snaps do not need to be functional. Snaps are silver in color with the bottom of the snap facing outward and are not painted. cheers Quote
LEGOeatPokemon[TK] Posted March 27, 2020 Author Report Posted March 27, 2020 Just in case Jonas. I'm not sure if it's a light ( or my old eyes) effect but the two rivets looks like be in black color? The crl states: Two male snaps are present on the lower center tab of the Posterior Armor. Snaps do not need to be functional. Snaps are silver in color with the bottom of the snap facing outward and are not painted. cheers No thats light, they're metalSkickat från min H60-L04 via Tapatalk 1 Quote
LEGOeatPokemon[TK] Posted March 27, 2020 Author Report Posted March 27, 2020 Here we have some extra photos: Split rivets: Han snap: Buttons, I know as they are separate and not molded into the button panels they don't hold up for centurion. I will probably change them sometime when I can afford new button plates, right now I have very little money and can't afford any new ones. Will be satisfied with EI for now at least. Hopefully those will do! 1 Quote
TKSpartan[Staff] Posted March 27, 2020 Report Posted March 27, 2020 (edited) 23 minutes ago, LEGOeatPokemon said: Hopefully those will do! Great Jonas, now just wait for the D.O. team to start your review. any other photo or adjustment wiil be ask by them Good Luck , Your EIB Badge is waiting for You Trooper !!! Edited March 27, 2020 by TKSpartan 1 Quote
justjoseph63[Staff] Posted March 27, 2020 Report Posted March 27, 2020 It's about time, Jonas, lol! One of us will be with your shortly sir! 1 Quote
justjoseph63[Staff] Posted March 30, 2020 Report Posted March 30, 2020 Hi Jonas, and thank you for your EI submission! In the following review I will be going over items pertaining to your current submission, as well as those that will be required for Centurion level should you choose to apply. CRL and EIB Application Requirements: All required submission photos have been posted and I am very pleased to announce your armor displays all the necessary elements to qualify for ANH Stunt Expert Infantry. On behalf of Sha Sha and myself, Congratulations! Other-Armor Fit/Assembly: In this section we review observations made by your fellow troopers and ourselves. Some observations may lead to suggestions to improve the overall look of your armor. Note that we consider both text (CRL) and pictures (screen caps/reference images) when reviewing submissions. First, I gotta' say that you really put a lot of hard work into this "re-build", brother, and it shows... great job! Only two suggestions in this area, which I am sure you can handle: Although they are crisp and clean, we would like to see the lines on the vocoder extended up a bit to where they cover the tops of the "ribs". Easy fix! Reference images The end of the clip shown below on your TD could (should) be trimmed a hair. Reference image Centurion Requirements In this section we prepare you for Centurion. More photos may be requested in the future that allow us to make better decisions on possible adjustments. If there are any areas of concern they will be discussed here. Because Centurion photos show much more detail than those for Expert Infantry, items to pertaining to Centurion might be seen there and not here. We try to point out all that we can from what is seen, but the final accuracy is the responsibility of the trooper. The first two items are simple strapping issues that I am sure will be pretty straightforward. It looks like your right shoulder bell could come up a bit. Bringing the top to where it touches the shoulder bridge (the right one is PERFECT) would remedy this. It would also reduce the gap between your bell and chest. Reference image We are suggesting that you drop the left bicep down a bit to even them out. You may want to check the forearm/bicep gaps afterward. Ideally they should be identical on both sides. Reference images As you know, because SDS has the attached buttons the plates will need to be replaced with ones that have the buttons integrated. TB sells those here if it helps. NICE job on trimming the one you have, (I appreciate the fact that you have the corners square, not rounded) but on the next round remember to trim the small plate a bit more. Reference image This will be an easy one! The angle on the tops of each side of the sniper knee plate should be increased as shown in the Reference images. 5 minutes with a Dremel or ABS scissors and you are good-to-go! Reference images Lastly, you did a an awesome job on that blaster but we are requesting that you move the Hengstler counter forward. Ideally, the back edge should line up with bolt that holds the folding stock on at the rear. Since there are usually only 2 screws that are used to attach it to the scope rail, this is another pretty simple fix. Reference images And that's it, sir! After following your build thread for so long, it really does make me happy to see that you have reached Level 2. Once you get the new ab-button plates and spend some time with those fixes I expect to see that Centurion submission! Hopefully you will be able to get out and troop soon as the newest EI in the Nordic Garrison! 1 Quote
justjoseph63[Staff] Posted March 30, 2020 Report Posted March 30, 2020 Don't forget to request one of these.. you earned it! https://www.whitearmor.net/forum/topic/40769-request-your-eib-certificate-here/ Quote
LEGOeatPokemon[TK] Posted March 30, 2020 Author Report Posted March 30, 2020 Thank you! It has truely been an honor working with everyone on this project, it glads me that it is so little left to L3! I might take a little break on the armour though, as it has been going on for almost half a year! I WILL come back though, probably when I've worn it a bit more and seen if I could improve things here and there. TK-22423 out! Quote
TheSwede[TK] Posted March 30, 2020 Report Posted March 30, 2020 Well done Trooper and welcome to Expert Infantry 1 Quote
TKSpartan[Staff] Posted March 30, 2020 Report Posted March 30, 2020 Congratulations Jonas, Welcome to EIB Well done Trooper ! 1 Quote
giskard8[Staff] Posted March 30, 2020 Report Posted March 30, 2020 Congratulations trooper, Welcome to the ranks. 1 Quote
gmrhodes13[Staff] Posted March 30, 2020 Report Posted March 30, 2020 Congratulations trooper and welcome to the EI ranks 1 Quote
Chemi[Staff] Posted March 30, 2020 Report Posted March 30, 2020 Congratulations!!!! Very good job... Regards... 1 Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.