Daetrin[Admin] Posted February 23, 2020 Report Posted February 23, 2020 I will sticky good replies as even for me the search doesn't always work, and the TIPS and HOWTO area hasn't been updated in ages. I have brown stains on my belt and am trying to figure out the best way to get them off. Seems almost like makeup or something. Maybe novus, but would a magic eraser also work? Quote
Neb Sgird[TK] Posted February 23, 2020 Report Posted February 23, 2020 Magic eraser THEN Novus. The magic eraser will take it off but leave your armor dull, since it's basically just a very fine abrasive. Hence the Novus polish to bring the luster back. Sent from my Pixel 3 using Tapatalk 1 Quote
magni[TK] Posted February 23, 2020 Report Posted February 23, 2020 If it's makeup novus 1 will take it off. I never use a magic eraser because it's a sanding block!! For regular maintenance I just use #1 and car wash detail rag. After so many troops I'll go over the whole armor with #2 working in small circles across all pieces. Once dry I buff that off with another detail towel and follow up with the #1 again. Finally finishing off with a final buff. A 100% of the time it works all the time! Quote
Gideon00[TK] Posted February 24, 2020 Report Posted February 24, 2020 Gonna be a lot of the same answers. Magic eraser all day for on the spot cleans, and the Novus (or similar) polishing process. I think Trooperbay also has a product that helps with yellowing if that is an issue.Sent from my iPhone using Tapatalk Quote
Sly11[Admin] Posted February 25, 2020 Report Posted February 25, 2020 Have seen these type of stain before.The only way to remove it is I with wet n dry sandpaper. Start with a light sand using 800 then move to 1200 grit.Once the bulk of it is removed Novus 3 then 2 finally buff with 1I have had a few of this type of Mark appear on my kit and it worked fine.Sent from my iPhone using Tapatalk Quote
Daetrin[Admin] Posted February 25, 2020 Author Report Posted February 25, 2020 Thanks Andrew - that is what I feared as it almost looks like it's been absorbed in to the plastic. Quote
gmrhodes13[Staff] Posted February 25, 2020 Report Posted February 25, 2020 I had some black stains on my FOTK, made soft pouches to keep the paint from being chipped scratched but used black material, had it handy, didn't think the die would run, anyway I used automotive cutting compound which did get the stains out, then went over with a final glaze polish to bring back the shine. Quote
justjoseph63[Staff] Posted February 25, 2020 Report Posted February 25, 2020 Looking at the color, it seems as if it's very specific to those areas. As the only tan color on the costume is on the holster straps, were they in contact at some point (during storage, perhaps)? Quote
Daetrin[Admin] Posted February 25, 2020 Author Report Posted February 25, 2020 Yeah, I'm guessing that may be it. I need to take better care of my armor... Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.