bishopdonmiguel[TK] Posted January 14, 2020 Author Report Posted January 14, 2020 Similar to the forearms, I'd like to have sharper edges on the Torso boxes. I previously asked about accurate size but after some consideration, I decided I'd just build to whatever size was required to cover the existing bumps. I don't want to compromise the strength of the Torso by removing the existing bumps. Torso boxes: Using ABS sheet, I constructed shells that would sit over the existing bumps. These seem to have a flat area that intersect the angled one on the bottom edge. From reference pictures, seems two boxes have recessed details so I tried to replicate those as best I could. I affixed with CA glue but these do not fit perfectly over the bumps. Have some concern that they will break off without a good bond so I drilled holes in the back and filled with more CA glue and accelerant. Some filler eliminates the gaps against the Torso. The size and spacing isn't 100% accurate as I decided to use the existing bumps as mounting points. But I think the look is much improved. 2 Quote
bishopdonmiguel[TK] Posted January 16, 2020 Author Report Posted January 16, 2020 Shoulder Bell Modification: As previously noted, the Shoulder Bells in this kit have the lower bells molded in. After removing the faux lower bells, I cut 1.5mm ABS as replacements using the basic shape I’ve seen in other build threads. Using a heat gun, I bent these to roughly match the Shoulder Bells and then affixed with CA glue. Unsure if I should trim further or lease as-is. 2 Quote
JAFO[TK] Posted January 16, 2020 Report Posted January 16, 2020 Shoulder Bell Modification: As previously noted, the Shoulder Bells in this kit have the lower bells molded in. After removing the faux lower bells, I cut 1.5mm ABS as replacements using the basic shape I’ve seen in other build threads. Using a heat gun, I bent these to roughly match the Shoulder Bells and then affixed with CA glue. Unsure if I should trim further or lease as-is. Another great mod! The lip looks great shape wise but perhaps a tad wide based on this reference. It’s negligible really so up to you whether you trim.Sent from my iPhone using Tapatalk Pro 1 Quote
bishopdonmiguel[TK] Posted January 16, 2020 Author Report Posted January 16, 2020 The lip looks great shape wise but perhaps a tad wide based on this reference. It’s negligible really so up to you whether you trim.Thank you for the feedback, I was thinking same. Will address this once I get the chest/yoke assembled for comparison against reference. 1 Quote
ukswrath[Staff] Posted January 19, 2020 Report Posted January 19, 2020 (edited) Hey Don actually from the outside perspective your pretty close. Here's a reference photo from the movie armor Edited January 19, 2020 by ukswrath 2 Quote
gmrhodes13[Staff] Posted January 19, 2020 Report Posted January 19, 2020 Nice work, coming along great 1 Quote
bishopdonmiguel[TK] Posted January 31, 2020 Author Report Posted January 31, 2020 Forearm Rail: As previously noted, I wasn't happy with the included resin rail. Modeled a replacement and 3D printed. I don't feel PLA is a resilient material for trooping so I molded this and will be casting using semi-rigid resin. I included the original kit rail for comparison. 6 Quote
JAFO[TK] Posted January 31, 2020 Report Posted January 31, 2020 Very nice cast. Great work!Sent from my iPhone using Tapatalk Pro 2 Quote
Sly11[Admin] Posted January 31, 2020 Report Posted January 31, 2020 Love the sharp detail, good job.Sent from my iPhone using Tapatalk 1 Quote
Kacrut[501st] Posted July 27, 2020 Report Posted July 27, 2020 Hi, ... any Updates with your 850 FOTK build? Thank you. 1 Quote
bishopdonmiguel[TK] Posted July 27, 2020 Author Report Posted July 27, 2020 14 hours ago, Kacrut said: Hi, ... any Updates with your 850 FOTK build? Thank you. The whole COVID mess has induced some build depression. Like, all dressed up but nowhere to troop. I do need to get back to work on this, if for no other reason than to get the parts off the guest room bed. 4 Quote
Sly11[Admin] Posted July 28, 2020 Report Posted July 28, 2020 Hi Don, Yeah tough times for many out there brother, but we will be hear for you when you can get back to it. I hope things start looking up for you soon. Stay safe and well. 2 Quote
gmrhodes13[Staff] Posted July 28, 2020 Report Posted July 28, 2020 Real life comes first brother, stay safe 1 Quote
bishopdonmiguel[TK] Posted August 8, 2020 Author Report Posted August 8, 2020 Trying to make some progress on my kit. Belt Boxes: As previously noted, the boxes that ship with the kit are mostly incorrect. The large pouch and front boxes are passable but the other 2 smaller ones are simply unacceptable. I printed these black boxes from files obtained from 3D Empire. As I do not like PLA as a prop material, I will be molding and casting these masters using a semi-rigid resin. Possibly heavier but will be much more durable. During prep, I added some hardware that will make attaching to the belt easier I think. 2 Quote
bishopdonmiguel[TK] Posted August 13, 2020 Author Report Posted August 13, 2020 Small update for today. Belt Boxes: Got the molds for the front boxes finished and cast the parts. Reasonably happy with these. I cast Chicago screws into the white pieces so they there will be a strong mechanical connection through the black spacers and into the belt. 2 Quote
gmrhodes13[Staff] Posted August 13, 2020 Report Posted August 13, 2020 They came out great, nice work 1 Quote
bishopdonmiguel[TK] Posted August 14, 2020 Author Report Posted August 14, 2020 Belt Boxes: After letting the resin cure, I test fit the front boxes. I think these should work nicely. Here are a few pics to illustrate the components... Quote
bishopdonmiguel[TK] Posted August 14, 2020 Author Report Posted August 14, 2020 Belt Boxes: Finished the mold for the pouch cover and cast with resin. After painting to match the armor, will use velcro to attach to the pouch I acquired from Trooperbay. 1 Quote
Guest Empire 3D Posted August 15, 2020 Report Posted August 15, 2020 8 hours ago, bishopdonmiguel said: Belt Boxes: Finished the mold for the pouch cover and cast with resin. After painting to match the armor, will use velcro to attach to the pouch I acquired from Trooperbay. You don't have permission to do this. I'm very disappointed to see this. You should have come to me prior Quote
bishopdonmiguel[TK] Posted August 15, 2020 Author Report Posted August 15, 2020 2 minutes ago, Guest Empire 3D said: You don't have permission to do this. I'm very disappointed to see this. You should have come to me prior I purchased the files. I left the watermark in the print to ensure people knew where I obtained the models. I haven’t offered to sell my castings to anyone. Not sure I understand your concern. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.