Hwt pack

[Lonetrooper13]

Pretty much nailed it.

 

Sent from my SM-G930F using Tapatalk

 

 

[justjoseph63[Staff]]

????

[Lonetrooper13]

It's humour.

Sent from my SM-G930F using Tapatalk

[justjoseph63[Staff]]

I like the idea of a built in coffee dispenser, though. 

[Lonetrooper13]

It's possible with the 1 pod machines for camping

Sent from my SM-G930F using Tapatalk

[TheRascalKing[TK]]

I'd keep looking for the Wedco/Garage Boss style pan, as you'll need to mod the bottom of this one and it looks a bit too narrow. We strive for some consistency across packs and it is closest to the ideal dimensions without significant modification (just cut the filler necks off and patch over). They're back on Amazon and not terribly expensive. There's also this group for support if you're on Facebook!

 

https://www.amazon.com/GarageBOSS-GB150-Quart-Drain-Funnel/dp/B01I7275GY

 

https://www.facebook.com/groups/1397219333684032

[justjoseph63[Staff]]

13 hours ago, TheRascalKing said:

I'd keep looking for the Wedco/Garage Boss style pan, as you'll need to mod the bottom of this one and it looks a bit too narrow. We strive for some consistency across packs and it is closest to the ideal dimensions without significant modification (just cut the filler necks off and patch over).

 

Excellent points, Justin.  With the one you provided the link to all that has to be done is to remove the spout at the top, which can be covered with a plastic disc.  It also has the advantage of having the indentation in the rear which allows the O I I detail on the backplate to have a place to fit in so the pack sits snugly against your body.

I covered the hole in the back of mine with black craft foam to (as seen in pic 2) to prevent any scratches.

 

       

[CallMeMrTibbles[501st]]

On 3/19/2021 at 9:28 PM, TheRascalKing said:

I'd keep looking for the Wedco/Garage Boss style pan, as you'll need to mod the bottom of this one and it looks a bit too narrow. We strive for some consistency across packs and it is closest to the ideal dimensions without significant modification (just cut the filler necks off and patch over). They're back on Amazon and not terribly expensive. There's also this group for support if you're on Facebook!

 

https://www.amazon.com/GarageBOSS-GB150-Quart-Drain-Funnel/dp/B01I7275GY

 

https://www.facebook.com/groups/1397219333684032

Thanks for these links mate.

Popped here to get the info before starting my pack build.

 

Hopefully can get that pan you mentioned in the UK(?)