Rogue One TK Resources - Where to Get Stuff!

[11b30b4[TK]]

Rogue One TK Sources (updated 8-10-2020)

 

Since I keep seeing these questions popping up from time to time, I figured I would make this simple for everyone. I do not have experience with some of these sources so if any of you do please chime in. Further, I am not pushing or supporting any of these sources, I am just providing you all the list and what they provide, and you choose who and what you want to go with. Lastly, If I do have experience with a specific source, I will note that and my overall experience with them. I am not pushing any sources, rather supplying you a list to work from if you are having a hard time finding stuff. Please feel free to add to this or provide "creative" comments.

 

ROTK Sources

 

Jimmiroquai       Armor, Helmet, Under Suit           jimmiroquai@yahoo.com

Jim was the first source for ROTK armor and is considered very accurate. The armor is flexible fiberglass and requires painting. I have a full set or armor, helmet, and under suit from Jim and I like everything.

 

850 Armor Works             Armor, Helmet, Under Suit           https://850armorworks.com/

850 AW is offering vacuum formed ROTK armor. They produce this armor in ABS and it looks accurate from the pictures I have seen. They also offer a resin helmet and undersuit now.

 

Helmet

Nico Henderson               Helmet 3D print files     https://www.facebook.com/nico.heath   

Etsy Nicolai DesertFareCosplay https://www.etsy.com/au/listing/784808040/rogue-one-stormtroopersolo-mimban

Nico designs extremely accurate helmets, his Shoretrooper helmet is considered the most accurate available and now he has designed a ROTK helmet that is extremely accurate and all the greebles are separate so you can print and paint them before attaching them. You will need to message him on FB. I have his ROTK helmet files and find them to be outstanding. Suggested print orientations  https://www.whitearmor.net/forum/topic/53519-recommended-printing-positions-for-nicos-tk-helmet/

Updated files

 TKModder421 https://www.whitearmor.net/forum/topic/53406-modifying-the-nico-helmet/ 

OxProps https://www.thingiverse.com/thing:4227844

Lenses Green Rogue One TK lenses to fit the Nico Henderson helmet Mr Paul's Shoretrooper Build https://www.facebook.com/totalgrunt 

 

Armor

akira-yuming               Armor 3D print files     https://www.cgtrader.com/3d-print-models/art/other/star-wars-rogue-one-tk-first-imperial-stormtrooper-armor (

Build thread

Jason @BigJasoni build thread https://www.whitearmor.net/forum/topic/49826-the-bigjasonis-rotk-3d-print-build-thread/

 

 

Updated 3D files

Jason @BigJasoni updated kidney plate https://www.whitearmor.net/forum/topic/52974-rogue-one-new-generation-eib-centurion-kidney-plate/

Jason @BigJasoni  updated belt boxes https://drive.google.com/drive/folders/19k-95YPTsiBJzHGIumsGLYQjQlx_S0p4

Jeff  @11b30b4 updated ab greebles https://www.thingiverse.com/thing:3973969

Jeff  @11b30b4 updated handplates https://www.thingiverse.com/thing:3910278

 

Hasbro Black Series         Helmet                 Amazon and others

Very nice helmet that will require significant alteration to be 501^st approved. I have one and I am planning on altering it for use with my 850 AW armor.

 

Build threads updating

Jeff  @11b30b4 updating Black Series helmet https://www.whitearmor.net/forum/topic/48054-11b30b4-tutorial-rotk-black-series-helmet-mod/

Colin @OddViking327 updating Black Series helmet https://www.whitearmor.net/forum/topic/52589-modifying-a-black-series-helmet-for-accuracy/

Updating

Colin @OddViking327 vent/traps updated 3D files https://www.thingiverse.com/thing:5455582

 

 

Please Note HeadShotProps is temporarily  suspended as a recommended vendor, until they are back to normal and gain positive feedback from our members.

HeadShotProps                Armor, Helmet                https://www.etsy.com/listing/830810037/rogue-one-stormtrooper-armor-kit?ref=shop_home_feat_4

The armor is vacuum formed and looks very similar to 850AW, although the TD looks better in the pics than the 850AW TD. The helmet looks to be a nice pull, this helmet is roto cast with greebles

 

 

Soft Goods

Other than the previously noted sources many of the soft goods are available from these sources:

 

Dark Side Closet               Under Suit                           https://www.facebook.com/TheDarkSideCloset/

I have messaged them for pricing and shipping, and they are very responsive.

 

Geeky Pink’s Gaskets     Under Suit           https://www.facebook.com/GeekyPinksPhantasticGaskets/

You will need to message here and provide specifications.

 

Keep Trooping                  RO Boots, Gloves, Strapping        https://keeptrooping.com/

I have a set of boots and gloves from IB. I love the boots, the gloves are not the highest quality.

 

Endor Finders                    RO Gloves                           https://www.endorfinders.com/

I have a set of gloves from EF and I love them.

 

Katarra8               RO Pauldrons                     https://www.etsy.com/listing/150178963/classic-star-wars-stormtrooper-shoulder?ref=shop_home_feat_3&frs=1

I have a RO Orange Pauldron from Katarra8 and I love it.

 

Veeds Pauldrons              RO Pauldrons     https://www.facebook.com/pages/category/Product-Service/Veeds-Pauldrons-305552456469495/

I do not have any of Veeds’ Pauldrons but he is highly reviewed and respected.

 

Sheev's Emporium           RO Undersuit and Gaskets   https://www.facebook.com/sheevsemporium

I do not have any of Sheev's goods but I do know they have been very active in the Shoretrooper community and the quality seems to nearly screen accurate. 

 

Crow Props        RO Boots https://crowprops.bigcartel.com/product/fo-r1-tk

 

E-11s

 

Bryan @trooper96    3D print files https://www.printables.com/model/155855-st-sterling-l2a1-aeg-and-rogue-one-e-11-conversion Sterling conversion  https://www.printables.com/model/168104-rogue-one-e-11-conversion-kit-for-sterling-smg-mk4

 

Hyperfirm Weaponry (HFx Productions)  GOING OUT OF BUSINESS, NOT TAKING ANY NEW ORDERS               RO E-11                https://www.facebook.com/HFx-Productions-1669859386576227/

I have a B-Grade RO E-11 from Hyperfirm and love it.

 

Praetorian Blasters          RO E-11                https://www.facebook.com/BlasterMaker/

I do not own a PB RO E-11 but it looks awesome.

 

S&T Full Metal Airsoft Sterling E-11           RO E-11                https://www.evike.com/products/61969/

While most of the E-11s used in RO were made using the S&T Full Metal airsoft Sterling, this E-11 is not very accurate for RO. The scope, counter, and  power cylinders are all wrong and there is not a light rail or tactical light.

 

DoopyDoo’s                       RO E-11 parts     https://www.doopydoos.com/star-wars-props-31-c.asp

It has been noted that some of the E-11s used in RO were equipped with a DoopyDoo cast of the M.H.R. Co. M38 Telescope from Sherman M4 Tank (1943 version with wide front foot).

 

War Machine                     RO E-11 parts     http://www.warmachinepaintball.com/online-store-replicas/

If you are looking to make a full “all metal” RO E-11, look no further. War Machine makes everything you would ever need.

 

Bulldog Props                    RO E-11 parts     https://www.facebook.com/BulldogPropsJapan/

Brian makes resin casts of the M.H.R. Co. M38 Telescope from Sherman M4 Tank (1943 version with wide front foot) that are completely accurate and disassemble-able. I own one and love it. I have done a full review of it on FISD.

 

Shear Tech                         RO E-11, Rubber RO Handguards     https://www.facebook.com/sheartech/

I am not real familiar with these guys but the E-11 looks nice and the rubber hand guards are nice as well.

 

Picatinny Rail ROTK / FOTK

E-11/F11D Picatinny Rail  - (evike.com) - Link (purchase)

E-11/F-11D Picatinny Rail  - (justloseph63) - Link (purchase)

E-11/F-11D Picatinny Rail  - (m416gelblaster) - Link (purchase)

F-11D Picatinny Rail  - (themaninthesuitcase) - Link 3D files

E-11 Picatinny Rail  - (TK14082) -Link Part of Rogue One 3D files

 

While there are a lot more sources out there this is a fairly good list for anyone to work from. I did not include sources like static burst communication kits or urethane rubber shoulder straps sources, but they are out there and if you are looking for that stuff you should be able to find them.

 

I hope this helps those of you who are looking to embark on your ROTK journey.

 

Rough comparison Chest / Back

 

Edited May 14 by gmrhodes13
Updated IB to keep trooping

[MMcFett]

Does 850 make the helmet? I thought they didn't.

Sent from my Pixel 2 XL using Tapatalk

[11b30b4[TK]]

MMcFett, you are correct. i thought they were doing a helmet at one point but that was HSP. I have corrected the OP.

 

[TheRascalKing[TK]]

Also, Hyperfirm is no longer around - Praetorian effectively took over for them. If you can find one secondhand, they're still great blasters, but no new orders are being taken.

 

In other news, THANK YOU for posting this - it will be SUPER helpful for new recruits!

[11b30b4[TK]]

Crap, grabbing the B-Grade anything was like getting next to new stuff for 1/2 price. OP corrected again. 

[ukswrath[Staff]]

Nice job Jeff 

[11b30b4[TK]]

Ukswrath, thanks brother. I also found another RO E-11 maker. I will add them to the list.

[MMcFett]

These guys also make the blaster.
https://www.etsy.com/listing/467464092/e-11-r1-blaster-diy-kit-or-ready-to-use

Sent from my Pixel 2 XL using Tapatalk

[Guest All the power]

Someone sells a extremely accurate 3D model of the rogue one helmet seen here:

https://www.cgtrader.com/3d-print-models/games-toys/toys/stormtrooper-helmet-star-war

 

I bought the model to see how good it actually is, there are some issues to be noted.

 

1. The 1 piece model has the cut lines from where it was split. Not sure why the person did that.
2. It has a surface of that of a scanned 3d model, not a scratch built one. Maybe a sideshow/hot toys rogue one helmet was used or maybe the file got corrupted from when it was uploaded to the host website, ruining the faces of the model.

[GandalfTheImperial]

Now that I'm logged in. Here's a pic of the model in blender (which a smoother modifier added to smooth those nasty faces) with those weird lines visible

 

Might try to contact the seller see if he as a model without them. Because looking at the possibility of 3d printing this as one piece looks like a challenge when you look at the mesh.

 

 

Edited September 21, 2019 by GandalfTheImperial

[ukswrath[Staff]]

On ‎9‎/‎20‎/‎2019 at 6:58 AM, 11b30b4 said:

Ukswrath, thanks brother. I also found another RO E-11 maker. I will add them to the list.

Sorry for the late, my pleasure 

[11b30b4[TK]]

Well Crap MMcFett, If I had seen that RO E-11 back when I was doing my build I would have grabbed it. I purchased an ANH E-11 3D print from Blaster Master before he shut down his store. Lots of awesome reviews of his E-11s and he was a great guy to talk with. I planned on building the ANH E-11 and converting it to RO standards but I have never gotten around to doing it.

 

GandalfTheImperial, that bucket looks nice. I have a Prusa I3Mk3 so I would need to print it in parts and then glue it together. I like the size options as well and 30.00 bucks for the model seems like a steel. I have a black series bucket that I am planning on modifying for my RO 850 AW build but I am not sure which would be easier, 3D print this one or mod the BS. The only thing I would do differently if I had modeled this would be to have the tears and rear boxes be separate parts. This would make painting and detailing easier.

 

I know there are some 3D models of the armor out there but I have no idea where and obviously no clue about price and quality.

Thank you everyone for the updates.

[CommissarGurke[501st]]

Are there any RO E-11 3D files currently available anywhere? I've had little luck finding any during my research, so I might end up converting the ANH E-11 to RO, as 11b30b4 mentioned.

[lightwave000]

Does anyone know what is going on with Praetorian? I was in communication with them over 2 weeks ago on their FB page and they said they were almost done with their new batch of E11s. Then they fell off the face of the Earth and are nowhere to be seen and do not respond.

[ukswrath[Staff]]

On 9/25/2019 at 6:15 AM, lightwave000 said:

Does anyone know what is going on with Praetorian? I was in communication with them over 2 weeks ago on their FB page and they said they were almost done with their new batch of E11s. Then they fell off the face of the Earth and are nowhere to be seen and do not respond.

Well they've always been a bit spotty on their response times and consistancy but they've eventually get back to you, usually. Send them another email or PM every few days. 

[lightwave000]

23 hours ago, ukswrath said:

Well they've always been a bit spotty on their response times and consistancy but they've eventually get back to you, usually. Send them another email or PM every few days. 

Ok thanks for the info. They told me a week and its been 3. I'm slowly running out of time to wait so I may have to go with an alternative.

[TheRascalKing[TK]]

On 9/27/2019 at 11:35 AM, lightwave000 said:

Ok thanks for the info. They told me a week and its been 3. I'm slowly running out of time to wait so I may have to go with an alternative.

I saw a recent FB post from Praetorian that the owner had the flu. That might be why the delay. I'd give it another week!

[lightwave000]

Yes I saw that too. That was 4 days ago now. I messaged the owner and the official page. Multiple times. I see they have been active but no response back. I know I'm probably not the only person trying to get a hold of them but I think a quick reply to let us know whats up would be nice/professional. At this point, the 1 week that has turned into 4 weeks of waiting-as much as I wanted one, I may just go another route. I don't have anymore time to wait or ill end up buying something random at the toy store and spray painting it black lol. Very disappointing as Ive heard its a great product.

[gmrhodes13[Staff]]

Something to remember is many armor makers do this in their spare time and real life comes first and although unfortunate not to receive a reply people do get busy, ill or even go on holidays it's not uncommon not to hear from a maker for weeks so hang tight if you can I'm sure you'll get a response in time.

[cjkirk11]

I have a praetorian E-11 and I was one of the first to buy the R1 version and they were super helpful and it is a fantastic product. I'd give them some time.

[MMcFett]

So HSP is making the armor now and looks like 850 is starting on the helmet.

[TKModder421[TK]]

Any suggestions for lenses?

[11b30b4[TK]]

List updated. thank you all for the suggestions. TKModder421, the best I can suggest is to try some of the OT lenses from a ton of sources and see if they fit your helmet. If I recall, you have Nico' files. There should be lense bucks for vacuum forming included in the files pack. But I am assuming you do not have a vacuum forming machine and that is why you are asking. Sending you a pm now.

[PaqMan11M]

On 9/17/2019 at 12:47 PM, 11b30b4 said:

MMcFett, you are correct. i thought they were doing a helmet at one point but that was HSP. I have corrected the OP.

 

@11b30b4 850Armorworks has upgraded their ENTIRE shop (multiple 3D printers, new paint booth) and has just begun production of a rotocast ROTK helmet, and it comes with your choice of printed hovi mics. They are also working on upgrading ROTK armor parts slowly but surely. Because of Hurricane Sally, they are shutdown, but they will be back up and running as soon as possible. Their IG has been documenting everything, and it's impressive.

[CountCunning]

I see on the CRL that there's an option for a baton and holster. Has anyone got a bead on the model of baton and type of holster used?