Rookhelm[TK] Posted July 22, 2019 Report Posted July 22, 2019 working on my TK (ANH Stunt) kit over the weekend, and a couple questions came up that I couldn't find answers to. For the thighs: Where should the bottom edge of the thigh (not including ammo belt) lie on my leg? Above the knee? For the back, is there any gap allowed between the back plate and kidney plate? if so, how much is acceptable? Also, are there any return edges that I need to make sure I keep? This is a Level 1 build (not interested in going EIB or Centurion). Thanks! Quote
TheSwede[TK] Posted July 22, 2019 Report Posted July 22, 2019 46 minutes ago, Rookhelm said: For the thighs: Where should the bottom edge of the thigh (not including ammo belt) lie on my leg? Above the knee? Just above the knee would be a good reference point to start with. Depends on hight and spacing with cod and shins. 46 minutes ago, Rookhelm said: For the back, is there any gap allowed between the back plate and kidney plate? if so, how much is acceptable? Depends on the overall look, a taller Trooper might need some gap but preferably there’s minimal gap. A good rule of thumb is that if you are a taller Trooper you adjust the shoulder strapping and keeping the torso pieces butted up. 48 minutes ago, Rookhelm said: Also, are there any return edges that I need to make sure I keep? In general no, the top of the sniperplate is required though and top of the shins would be recomended to leave atleast a few mm. If you’re using the brackets then the torso pieces would need to have them, also leaving them on those areas helps in keeping the armor from overlapping. In general the suits looks better leaving a few mm. With that said there are exceptions such as the wrist ends of the forearms, inner elbow, lower bicep, inner thighs, cod area and lower posterior plate that benefits from having the majority removed. Apart from wrist and inner elbow were all can be removed from the get-go I would suggest to keep some in the other areas and trim more if needed. Going over the EIB/Centurion applications is great even though not going for those levels as is shows good examples on how the armor should look and fit on a person. If you posted some pictures of your current state it would help us help you 1 Quote
Rookhelm[TK] Posted July 22, 2019 Author Report Posted July 22, 2019 Thanks for the info...I have another question, but will require a picture first. I'll take some and follow up 2 Quote
gmrhodes13[Staff] Posted July 23, 2019 Report Posted July 23, 2019 When in doubt check the gallery sections, great source of references Quote
Rookhelm[TK] Posted July 23, 2019 Author Report Posted July 23, 2019 For my shoulder straps, do I need to trim anything off these? And for the codpiece, how much can I trim off the underside of this? Quote
Frank75139[501st] Posted July 23, 2019 Report Posted July 23, 2019 Nope to the shoulder straps and if you need to trim a little on the cod piece go for it. I’m assuming you mean making the bottom section smaller and thinner? Whatever is comfortable just don’t go crazy with the cutting. Sent from my iPhone using Tapatalk Quote
starsaber25[Admin] Posted July 23, 2019 Report Posted July 23, 2019 If you wanted to you could just sand down those shoulder bridges a tad. Nothing crazy. What kit are those bridges from? And for the cod, I would round it off some. Just make sure it’s comfortable no matter what you do. Quote
Rookhelm[TK] Posted July 23, 2019 Author Report Posted July 23, 2019 It's an AM 2.0 kit. With the cod piece, I want to raise the ab section up a bit, but the cod piece hits my underside a bit. Does it have to go under you at all? Or can it be more in the front and not curve under? Quote
starsaber25[Admin] Posted July 25, 2019 Report Posted July 25, 2019 Brian how tall are you? You will need to have some go under for sure in order for it to look right. But of course you have to make it work with your height. Quote
Rookhelm[TK] Posted July 25, 2019 Author Report Posted July 25, 2019 I'm 6 foot. I could probably get away with not raising it up, but I'm trying to minimize the gap between the kidney and back plate Quote
TheSwede[TK] Posted July 25, 2019 Report Posted July 25, 2019 Hike it up as far as you can, think of it as a ”cup” and if needs be you lower the back plate. As for shoulder bridges I would trim them straight with the sides to match and cut the ends closer to the last bump. Here’s some shoulder bridge reference for you Quote
CableGuy[Admin] Posted July 25, 2019 Report Posted July 25, 2019 Hey there, trooper. I’d be tempted to trim those shoulder bridges down a bit, just to even out the proportions. Quote
TheRascalKing[TK] Posted July 25, 2019 Report Posted July 25, 2019 On 7/23/2019 at 11:14 AM, Rookhelm said: For my shoulder straps, do I need to trim anything off these? And for the codpiece, how much can I trim off the underside of this? Definitely trim. Looks terrible when people forget. AM kits are 'pre-trimmed', but almost everything needs a couple mm taken off. Make sure to trim your Thermal Detonator pieces and handguards down a tad as well, those are also easy to overlook. 2 Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.