Stormy3D Posted July 19, 2019 Report Posted July 19, 2019 Hello everyone. I'm currently working on my own build, and I had a quick question. How long is your scope rail? Unfortunately, I have to redo the main body, and so I need a measurement, so I can properly cut the holes, and cut the scope rail properly. I'd preferably like the dimensions from a doopy do's kit, but it shouldn't matter much. Any help is really appreciated. Thank you for the read! Quote
Stormy3D Posted July 19, 2019 Author Report Posted July 19, 2019 18 minutes ago, gmrhodes13 said: This may help Thank you, that thread is plenty helpful! But I was mostly looking for the length of the Scope Rail, as well as where the bends are made. I couldn't find that info in the thread, unfortunately. Quote
gmrhodes13[Staff] Posted July 19, 2019 Report Posted July 19, 2019 Length of rail is in the diagram in that thread and the bends. 2 Quote
LightBox Posted July 19, 2019 Report Posted July 19, 2019 On 7/19/2019 at 12:25 PM, gmrhodes13 said: Length of rail is in the diagram in that thread and the bends. Thank you very much for your help! I was looking for that thread too. Question though, do you this would be able to work with a doopydos? Quote
Stormy3D Posted July 19, 2019 Author Report Posted July 19, 2019 On 7/19/2019 at 12:25 PM, gmrhodes13 said: Length of rail is in the diagram in that thread and the bends. Thank you for that, I must be blind! Didn't notice that on my first view. Grateful for the help, sorry I didn't notice it earlier. 1 Quote
themaninthesuitcase[Admin] Posted July 19, 2019 Report Posted July 19, 2019 I measured mine off of the casting, if you've put stuff slightly off then any measurements we give you will be off. 1 Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.