Aizenoso[TK] Posted July 18, 2019 Author Report Posted July 18, 2019 The thigh ammo belt with full 45° corners, glued with abs cement over the lower ridge. With the flash you can see better the blue paint job Enviado desde mi SM-G955F mediante Tapatalk Quote
Aizenoso[TK] Posted July 18, 2019 Author Report Posted July 18, 2019 The rivets on the armor can be seen facing each other on each side.There is not visible crotch snap/rivets.The 5th leftie button is over the higher from the central panel. Enviado desde mi SM-G955F mediante Tapatalk Quote
Aizenoso[TK] Posted July 18, 2019 Author Report Posted July 18, 2019 Now the helmet...Green film used for the lenses attached with velcro strips.Correct hovi mic styled aireators, painted black outside and white inside with big hole metallic mesh. S-type trim used at the neck part. Only 1 rank bar painted at each ear. Flower styled foam inside of the helmet and elastic bands with snaps to secure the helmet in place.16 16mm wide blue stripes on the left side, 15 on the right side. 7 black stripes on each tear, and 11 on back traps.Double layer of mesh used behind the frown, painted in black outside.Blue stripe runs over the brow, that starts flat at the base behind the helmet and ends pointy at the end of the face.I think, that's all until I get my neck seal and upper part for the black suit Enviado desde mi SM-G955F mediante Tapatalk Quote
gmrhodes13[Staff] Posted July 19, 2019 Report Posted July 19, 2019 Nice work, you could have angled the helmet strip a little more on an angle, also goes over the corner of the eye, but you should be ok for basic approval. Just on my way out so I will have a look over the rest when I get back. Quote
Aizenoso[TK] Posted July 19, 2019 Author Report Posted July 19, 2019 1 minute ago, gmrhodes13 said: Nice work, you could have angled the helmet strip a little more on an angle, also goes over the corner of the eye, but you should be ok for basic approval. Just on my way out so I will have a look over the rest when I get back. Indeed, but that way makes that the stripe get an angle i don't feel good with, also, if i have to get the reference from that image, the blue strip get really wide at the top, and flat at the end of the face. For higher level, do i have to modify that? Just to know and make it all now. Quote
gmrhodes13[Staff] Posted July 19, 2019 Report Posted July 19, 2019 3 hours ago, Aizenoso said: For higher level, do i have to modify that? Just to know and make it all now. That is entirely up to the DO's (deployment officers) Good luck with approval 1 Quote
Anxo200[TK] Posted July 19, 2019 Report Posted July 19, 2019 (edited) good luck with the approval and a excellent photographic work to show all the armour. Cheer up Edited July 19, 2019 by Anxo200 Mistakes 1 Quote
Aizenoso[TK] Posted July 19, 2019 Author Report Posted July 19, 2019 2 minutes ago, Anxo200 said: good luce with the approval and a excellent photographic work to show all the armour. Cheer up Thanks you!! Quote
Aizenoso[TK] Posted July 19, 2019 Author Report Posted July 19, 2019 9 hours ago, gmrhodes13 said: That is entirely up to the DO's (deployment officers) Good luck with approval Thanks you very much! Hope to see you soon with next levels applications! Quote
Aizenoso[TK] Posted July 19, 2019 Author Report Posted July 19, 2019 I successfully set up a tripod and got myself on 4k video, so I can take frames to get the pre approval check out Still missing the neckseal and side elastic bands from chest to back. Enviado desde mi SM-G955F mediante Tapatalk Quote
Aizenoso[TK] Posted July 19, 2019 Author Report Posted July 19, 2019 As i dressed alone, with noone to check if something was in the exactly right place or not, there maybe have some things missplaced, like the belt, it attaches by 2 snaps, but if you pull it up it gets right in the lower border of the button panel. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.