echo327[TK] Posted July 23, 2019 Author Report Share Posted July 23, 2019 So after some time spent feeling really good about my progress I took the tape and clamps off and was immediately disappointed. I totally hate the way these peices came out. I think by putting strips on the inside I ended up making it harder for myself with the outside ones to get a perfect fit. The saving grace is that I chose to use E6000 and not zap a gap. Thank you to all who pushed me in that direction. The thing I'm taking away from this is that sh!@ happens, live and learn, and all those other cat posters. I'm taking a day off of building. Tomorrow I'll tear these things apart, clean them off and start over with a clear head. Failure is not an option but it is a temporary shot in the stomach. I'll be in the corner licking my wounds. Sent from my SM-N960U using Tapatalk Quote Link to comment Share on other sites More sharing options...
gmrhodes13[Staff] Posted July 23, 2019 Report Share Posted July 23, 2019 I found adding the outside strips first then later the insides, doesn't matter as much if the insides aren't perfect. Also you do need to clamp them down pretty tight, either clamps, magnets or painters tape, or a mixture of all three which is what I use and A LOT of them. I ordered another 50 since this photo was taken Leaving the glue to cure for at least 24 hours and longer if you have parts that need extra tension to hold strips down. At least with E6000 they are easy to pull apart and rub your thumb along to remove the excess glue. 2 Quote Link to comment Share on other sites More sharing options...
justjoseph63[Staff] Posted July 23, 2019 Report Share Posted July 23, 2019 Not to worry, Erick! I don't think there has been an armor build in history that didn't have some sort of temporary glitch.... it's all in how you deal with it. Sometimes stepping back and taking a day off is the best thing to do. The good news is that using E-6000 was a wise move, and having those gaps will actually save you some time when removing them as you can carefully use an Exacto or razor knife to cut through the glue. It looks as if the glue didn't set completely. Did you wait at least 24 hours? One thing that (again) may help is to remove the return edges at least at the bottom. Having those on does not permit the ABS to flex as much into the oval/round shape you need, and can cause the seams to bow out and the cover strip to not sit tightly. If you decide to re-do the biceps as well, I would remove more of the "scoop" and re-size them before re-gluing which will make them more comfortable. Also, try to get rid of any sharp areas (red circle) which can pinch you or potentially snag on your under suit. Hang in there, sir, and don't let this get you down. Enjoy your day off from your build, and know that we are here for ya' when you are ready to jump back in! 1 Quote Link to comment Share on other sites More sharing options...
lucnak[TK] Posted July 23, 2019 Report Share Posted July 23, 2019 What Glen said! Tapes and magnets galore! I have ATA as well and quite like compared to others that I've worked on. You're well on your way and you'll get there in no time! 1 Quote Link to comment Share on other sites More sharing options...
Bazz[TK] Posted July 24, 2019 Report Share Posted July 24, 2019 strong magnets and clamps is your possible solutions brother 1 Quote Link to comment Share on other sites More sharing options...
echo327[TK] Posted July 25, 2019 Author Report Share Posted July 25, 2019 Take 2 on the forearms. I got rid of all return edges and used the dremmel to smooth out. I think this time it will set much better. Sent from my SM-N960U using Tapatalk 1 Quote Link to comment Share on other sites More sharing options...
echo327[TK] Posted July 27, 2019 Author Report Share Posted July 27, 2019 Decided to do some work on the chest and back tonight. A little test fit. Happy Friday!!Sent from my SM-N960U using Tapatalk Quote Link to comment Share on other sites More sharing options...
echo327[TK] Posted July 27, 2019 Author Report Share Posted July 27, 2019 A Saturday well spent. Some test fitting. Almost done trimming. And found the strength to drill some holes in the bucket! Please let me know what you see and what I might want to fix. I gotta say I'm really enjoying this process. I was really scared and nervous at the beginning but now I'm loving every minute! Sent from my SM-N960U using Tapatalk Quote Link to comment Share on other sites More sharing options...
echo327[TK] Posted July 28, 2019 Author Report Share Posted July 28, 2019 All trimming is now complete! Now onto gluing. I'm happy with the progress I made this weekend. I'm taking the rest of the day off of building! Sent from my SM-N960U using Tapatalk Quote Link to comment Share on other sites More sharing options...
Coastertk Posted July 28, 2019 Report Share Posted July 28, 2019 That’s a great feeling to be done trimming for sure. Have you given consideration to the level of accuracy you’re shooting for with your build? 1 Quote Link to comment Share on other sites More sharing options...
gmrhodes13[Staff] Posted July 28, 2019 Report Share Posted July 28, 2019 Great news, move along, move along 1 Quote Link to comment Share on other sites More sharing options...
echo327[TK] Posted July 29, 2019 Author Report Share Posted July 29, 2019 14 hours ago, Coastertk said: That’s a great feeling to be done trimming for sure. Have you given consideration to the level of accuracy you’re shooting for with your build? To be honest...... I would like to shoot for Centurion but I also think that just being approved and then making tweeks as I go to get there would be ok too. Quote Link to comment Share on other sites More sharing options...
echo327[TK] Posted July 29, 2019 Author Report Share Posted July 29, 2019 I got a little too excited trimming the ears. Reflecting back at my actions I made a fatal error. I didn't check any reference pictures. I assumed that the bottom of the ear wrapped all the way to the bottom of the bucket. In all actuality, it sits kind of high on the cheek. Thinking that it wraps all the way down I trimmed to that and you can see the contour is right but the ear itself sits way too low. Luckily ATA send 2 pairs of lefts and rights just for idiots like me! Thank you ATA!!! All in all I spent many hours this weekend in my workshop and enjoyed every minute. Even the few setbacks! Sent from my SM-N960U using Tapatalk Quote Link to comment Share on other sites More sharing options...
Sly11[Admin] Posted July 29, 2019 Report Share Posted July 29, 2019 The choice is certainly yours on how high you wish to go.One thing I can say is, it will be a little easier to build to Centurion from the outset. It will save you time in the long run, the little extras aren’t very expensive to obtain, and you will have a great sense of pride knowing you went all the way.Sent from my iPhone using Tapatalk 2 Quote Link to comment Share on other sites More sharing options...
ukswrath[Staff] Posted July 30, 2019 Report Share Posted July 30, 2019 (edited) Coming along nicely Erick, The ATA ears can be a little tricky. Here's a few photos of my ATA bucket. Hope they help. L R Edited July 30, 2019 by ukswrath 1 Quote Link to comment Share on other sites More sharing options...
echo327[TK] Posted July 31, 2019 Author Report Share Posted July 31, 2019 Coming along nicely Erick, The ATA ears can be a little tricky. Here's a few photos of my ATA bucket. Hope they help. L R This will help tremendously! Thank you. I'm gonna give it another try this weekend. Sent from my SM-N960U using Tapatalk 1 Quote Link to comment Share on other sites More sharing options...
echo327[TK] Posted August 3, 2019 Author Report Share Posted August 3, 2019 Some bucket building and some sewing today. The real victory is getting my wife's grandmother's 1952 sewing machine working!Sent from my SM-N960U using Tapatalk Quote Link to comment Share on other sites More sharing options...
echo327[TK] Posted August 3, 2019 Author Report Share Posted August 3, 2019 https://photos.app.goo.gl/7XQY8QJvTXP5MKuq8Here's a link to all my pictures of my build. Enjoy!!Sent from my SM-N960U using Tapatalk Quote Link to comment Share on other sites More sharing options...
echo327[TK] Posted August 4, 2019 Author Report Share Posted August 4, 2019 Test fit of arms was so fun! My forearms are little loose and I gotta move the straps on the shoulder bells but I think its coming along nicely. Also did some painting on the bucket.Sent from my SM-N960U using Tapatalk Quote Link to comment Share on other sites More sharing options...
echo327[TK] Posted August 4, 2019 Author Report Share Posted August 4, 2019 Sunday morning gluing. Sent from my SM-N960U using Tapatalk Quote Link to comment Share on other sites More sharing options...
echo327[TK] Posted August 7, 2019 Author Report Share Posted August 7, 2019 Last of the gluing!!Sent from my SM-N960U using Tapatalk Quote Link to comment Share on other sites More sharing options...
gmrhodes13[Staff] Posted August 7, 2019 Report Share Posted August 7, 2019 Almost there 1 Quote Link to comment Share on other sites More sharing options...
CableGuy[Admin] Posted August 8, 2019 Report Share Posted August 8, 2019 Nice work, Erick. :-) As per FB, you mentioned the forearms being a little loose - it looks like you could reduce the circumference of them for a more snug fit. At the wrist end you should just about be able to squeeze your mad through (without gloves). Also, if you wanted a challenge you could try trimming the ears down a little more. ;-) Keep yo the good work. :-) 1 Quote Link to comment Share on other sites More sharing options...
Helotech[TK] Posted August 8, 2019 Report Share Posted August 8, 2019 Good work. Keep it up 1 Quote Link to comment Share on other sites More sharing options...
echo327[TK] Posted August 8, 2019 Author Report Share Posted August 8, 2019 6 hours ago, CableGuy said: Nice work, Erick. :-) As per FB, you mentioned the forearms being a little loose - it looks like you could reduce the circumference of them for a more snug fit. At the wrist end you should just about be able to squeeze your mad through (without gloves). Also, if you wanted a challenge you could try trimming the ears down a little more. ;-) Keep yo the good work. :-) I think I'm gonna call it a win on my ears for now. My nerves are still shot from the first time trimming. I think my biggest problem with the ears is the angle. I'm gonna take a look at them this weekend and really take some time adjusting them. The forearms are perfect as far as getting them over my hands. The problem is after I get them on, my skinny forearms don't hold them anywhere they just slide around. I fixed this by adding a strap from the bicep to the forearm and that made all the difference in the world. They fit just right now and don't wiggle around anymore. Thank you so much for the help. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.