JimmyDUIC Posted March 30, 2019 Report Posted March 30, 2019 (edited) LINK TO APPROVAL PHOTOS: https://drive.google.com/drive/folders/1aHyfN7BLS6R4WUA00iqFg2n4O4an_6Wi?usp=sharing https://imgur.com/fkCWaSw https://imgur.com/a76JOR5 https://imgur.com/UqdSTHl https://imgur.com/y97Gh3U https://imgur.com/ODjrru7 https://imgur.com/wXoV051 https://imgur.com/AJvrrjv https://imgur.com/yV8ONDM https://imgur.com/3W3bbZf https://imgur.com/CG4j3nr https://imgur.com/1Qew8xs https://imgur.com/XSEEpRH https://imgur.com/w0JEjck Requested Info Answers First Name/Last Name James DeMory Future Garrison Midwest Garrison Armor Maker Armor Masters Helmet Maker Armor Masters Cloth Belt Maker Steve Gaza Neck Seal Maker New Jedi Order UK Boot Maker Funtasma/Jedi Robe America Blaster Maker NA Gasket Maker NA Height 6'4" Weight 230 pounds TK Type Stunt TK - ANH Troopers Who Helped Kent McCarthy-Heath Steve Gaza Eric Dyck Mike Stoughton Edited March 30, 2019 by JimmyDUIC Quote
gmrhodes13[Staff] Posted March 30, 2019 Report Posted March 30, 2019 Could you post your images directing into your thread, makes it a little easier to refer back to them. If you use a free online image host like Imgur you can select the "direct link" from your upload image and paste that link directly into your thread, multiple images can be posted then Quote
JimmyDUIC Posted March 30, 2019 Author Report Posted March 30, 2019 17 minutes ago, gmrhodes13 said: Could you post your images directing into your thread, makes it a little easier to refer back to them. If you use a free online image host like Imgur you can select the "direct link" from your upload image and paste that link directly into your thread, multiple images can be posted then Does that work? Sorry, first time using imgur. Quote
gmrhodes13[Staff] Posted March 30, 2019 Report Posted March 30, 2019 6 minutes ago, JimmyDUIC said: Does that work? Sorry, first time using imgur. It does, copy the "direct link" of you image (one by one), or if you are on computer you can even just right click on the uploaded Imgur photo, select copy and paste directly into the thread, for some reason it doesn't like it a much in mobile version. Quote
JimmyDUIC Posted March 30, 2019 Author Report Posted March 30, 2019 1 minute ago, gmrhodes13 said: It does, copy the "direct link" of you image (one by one), or if you are on computer you can even just right click on the uploaded Imgur photo, select copy and paste directly into the thread, for some reason it doesn't like it a much in mobile version. Perfect. I did that with all the images. Thank you. 1 Quote
gmrhodes13[Staff] Posted March 30, 2019 Report Posted March 30, 2019 5 minutes ago, JimmyDUIC said: Perfect. I did that with all the images. Thank you. Did you use "direct link" not just "link" as they don't appear to be working, I've just tried and seems ok. Quote
gmrhodes13[Staff] Posted March 30, 2019 Report Posted March 30, 2019 Nice work just need a couple of adjustments to really look the part, although some of these may not hold you up for basic there are definitely some which will so I'd advise carrying them all out. You have a big gap at your elbows, biceps should come down and forearms could come up away from your hand guards. Belt boxes should align with the end of the plastic section of the belt, you could add a dab of E6000 to the straps behind to hold them there. Ab plates should have square corners, bit hard to see Your kidney plate looks to be sticking out on the left side. You have some neck seal hanging out the back on the rear photo, also your shoulder straps at the back should not be rounded off. Back plate there is a big gap between it and your kidney, do you have elastic in between these at the backplate should come down. TD is not central at the back. Your forearms look to have a big gap when you look on the rear photo, perhaps reduce the size of these. Also your left bicep is rotated a little, thumb print should be to your side. Also looks like your ab/cod/butt could come up, that would help reduce the gap on teh back plate. Your gloves appear to be shining on the inside, usually rubber gloves are used and they have a matte appearance. Shoulder bells at the bottom should have elastic attached at the bottom of them, this helps hold them in tight up against the biceps. Thighs are not centred on the front. Shins also look a little large, they are not rotated straight either, I find adding a loop of elastic through the front of the boot loop and then add a snap and snap plate to the inside of the front of the shin, this will keep them straight and stop them frmo rising up. On the rear image there is a gap in the bottom ridge of your right thigh, not a real problem as you could add a strip of abs behind BUT your cover strip does not look as if it is central to the gap, but your left one is? Right thigh ammo strip is attached too high, the tops of the ammo strip should be attached to the lower ridge. You have a few things to modify so I may leave it there, have a good look at the CRL and adjust accordingly, also have a look at some of the other pre approval threads and compare with yours. Good luck with the adjustments, looking forward to seeing some new photos soon. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.