YourScout[TK] Posted January 25, 2019 Report Posted January 25, 2019 (edited) Hey guys, I have been working on this suit I got from another user on the forums Devon P. Pacific Outpost ANH Stunt Originally made by Helmet:AP Chest/Back:ATA Shoulders:ATA Arms:AM (1.0?) Thighs:AM (1.0?) Shins:AM (1.0?) Handplates:AM (1.0?) Belt: TKittell Boots: ImperialBoots Neck Seal maker: Unknown Holster: Bernard TK8280 P.S The belt originally had 4 rivets on it attatching the holster, I removed two of them I patched it, but not in these photos I'm only going for basic with this approval Edited January 25, 2019 by YourScout Quote
Harbinger[IPM] Posted January 25, 2019 Report Posted January 25, 2019 I don’t see anything that should hold you up for basic, I would raise up those forearms (a simple strapping adjustment) to even out the gaps between you bicep/forearm/handplates. If you plan on going for EI/Centurion I’d highly suggest: - a new belt (vs. patched) - no dropbox gap (top should be flush with belt bottom) - thigh TLC, coverstrips are quite wide and off-center in the back 1 Quote
SgtGarand[TK] Posted January 25, 2019 Report Posted January 25, 2019 I agree that you should be fine for basic approval. But to give the armor an overall better look, try adjusting your straps to bring your forearms and thighs up a bit. Good luck on your TK approval 1 Quote
Frank75139[501st] Posted January 25, 2019 Report Posted January 25, 2019 Nice job on the armor!Sent from my iPhone using Tapatalk 1 Quote
gmrhodes13[Staff] Posted January 26, 2019 Report Posted January 26, 2019 Nice work, one other thing is your calves are closing from the inside over the outsides, the normal way is the outsides should close over the insides calves, this is so the openings aren't seen from the outside Good luck with approval 1 Quote
justjoseph63[Staff] Posted January 26, 2019 Report Posted January 26, 2019 Looking pretty good overall, Devon. Even though you are not aiming for the higher levels, moving your shoulder bells up would improve the look a lot. Ideally, the tops of the bells should touch (or nearly touch) the shoulder straps. This is a pretty simple adjustment and will bring them closer to your chest plate which would reduce the gaps. If you do decide to do this, I would switch the shoulder bells. No biggie, but they are on the wrong sides. 1 Quote
gmrhodes13[Staff] Posted February 1, 2019 Report Posted February 1, 2019 Congratulations trooper and welcome to the ranks 1 Quote
giskard8[Staff] Posted February 1, 2019 Report Posted February 1, 2019 Congratulations trooper! 1 Quote
TheSwede[TK] Posted February 1, 2019 Report Posted February 1, 2019 Awesome - congratulations Trooper 1 Quote
sharkbait[TK] Posted February 14, 2019 Report Posted February 14, 2019 Congratulations and welcome! Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.