TK-Fett[TK] Posted October 8, 2018 Report Posted October 8, 2018 Hey Guys, I painted my HDPE helmet last night and the final coat came out with a slight texture to it. Whats the easiest way to strip all this paint with out sanding out the details of the kit. Is HDPE generally safe to put paint stripper on or should I look for a specialty product? I do have some scraps left from the build that I can test on before I hit the helmet with a chemical. Quote
Rat[TK] Posted October 8, 2018 Report Posted October 8, 2018 I would suggest testing the scrap first and then proceed.Sent from my 5054N using Tapatalk Quote
TK-Fett[TK] Posted October 8, 2018 Author Report Posted October 8, 2018 That's my general plan but I didn't know if anyone else had done this before and could point me in the right direction. My plan right now is to use "Aircraft" brand paint stripper, i've seen videos of it used in body shops on plastic pieces, hopefully its ok with HDPE too. Quote
RCMUSTANG[501st] Posted October 8, 2018 Report Posted October 8, 2018 Pretty sure any stripper will melt it. Quote
Harbinger[IPM] Posted October 9, 2018 Report Posted October 9, 2018 Only way to find out is to test. Safety first. Quote
Rat[TK] Posted October 9, 2018 Report Posted October 9, 2018 I've seen it used for stripping paint from hot wheels and matchbox cars. That's my general plan but I didn't know if anyone else had done this before and could point me in the right direction. My plan right now is to use "Aircraft" brand paint stripper, i've seen videos of it used in body shops on plastic pieces, hopefully its ok with HDPE too.Sent from my 5054N using Tapatalk Quote
TK-Fett[TK] Posted October 10, 2018 Author Report Posted October 10, 2018 Update, I ended up using the newly rebranded Rustoleum "Aircraft" stripper. It was the only thing I could find that only said not recommended for plastic. Everything else said do not use on plastic. I tested it on a small scrap strip and it worked without any visible damage so I moved onto the real helmet. I kept a wash cloth and a water hose handy just in case but it worked perfectly. Had all the paint off in just a little over an hour and zero damage to the helmet. HDPE is apparently pretty resiliant stuff. I'll report back if I develop and brittleness or other things that might be a side effect of using the stripper. Now onto the pics. http://imgur. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.