Jump to content

Recommended Posts

Posted
here you go
1079963784_TKTD.png.f3f9e810871c841e3ca69c1fa70c4b35.png

I made them...I can resize or make the clips again Commander , but I see what u mean !


Sent from my iPhone using Tapatalk
Posted
11 minutes ago, TK 71627 said:


I made them...I can resize or make the clips again Commander , but I see what u mean !


Sent from my iPhone using Tapatalk

I don't think they need to be remade. I am thinking that if you straighten the clips, then roll the TD out the right location it might help. then just cut the excess off the end. Again, this is probably more of a Centurion issue, but might as well fix it now, that way when your approved EIB, you can just turn around and submit for Centurion

 

*side note, I keep pushing people to apply Centurion when I haven't yet lol. My costume is ready, just been so busy with other projects HAHA! maybe ill kit up tonight and submit!!!

  • Like 1
Posted
I don't think they need to be remade. I am thinking that if you straighten the clips, then roll the TD out the right location it might help. then just cut the excess off the end. Again, this is probably more of a Centurion issue, but might as well fix it now, that way when your approved EIB, you can just turn around and submit for Centurion
 
*side note, I keep pushing people to apply Centurion when I haven't yet lol. My costume is ready, just been so busy with other projects HAHA! maybe ill kit up tonight and submit!!!

I thought u were a CENTURION ....
Do it tonight CMDR GREE !

DO

IT !!!


Sent from my iPhone using Tapatalk
  • Like 1
Posted

Hi again, Jose, and thank you for your both your patience and your ANH-Stunt  EI application.

CRL and EIB Application Requirements:

All required submission photos have been posted, and I am very pleased to announce your armor displays all the necessary elements to qualify for Expert Infantry. On behalf of the D.O. Staff, congratulations!     :salute:

 

Other-Armor Fit/Assembly:

In this section we review observations made by your fellow troopers and ourselves. Some observations may lead to suggestions to improve the overall look of your armor.

First, thank you for all the hard work in fixing the issues that have been discussed!  For the higher levels, it's all about looking your best and getting a close as you can to screen accuracy... here are a few other items that will help you do that, so let's dive right in!

 

1.  The tears on your helmet would look a lot better if extended to the inside edges of the indentation.

                                                                          Reference image

FlMnFKM.jpg?1  CfQXTQB.jpg

 

2.  Your vocoder looks good, but a bit of black paint and a "filbert" style brush would clean up the edges and make it look even better!

                                                                      Reference image

ezxfE4L.jpg?1   XxI4GQH.jpg?1

 

3.  The tops of your shoulder bells should be touching (or very close to) your shoulder bridge.  I have some ideas for achieving this in the section below for you.

                                                                                                                         Reference image

Q6gG2gG.jpg?1   jMR5Uc0.jpg

 

4.  For a much better look, your canvas belt could stand to be raised quite a bit in the back.  The front part meets the requirements for level 3 by touching the bottom of the center ab button plate, but that could come up more as well and still be acceptable for Centurion.

                                                                                       

                                                                                                                                                         

4WRJWzJ.jpg?1    Ac4M5Lc.jpg?1

 

                                     Reference image

jFw7B00.jpg?1

 

5.  Some of the buttons on your ab plates could be a bit smaller and more uniform in size.  Removing the paint and cleaning them up would take some time but would be well worth the effort and improve the look immensely.

                      

                                                                                                                      Reference image

 jvrZaaM.jpg?1  bQt8pP7.jpg?2

 

6.  You have your TD plate a little too far toward the front.  The "O" should basically face straight up.  I noticed that it touches the ends of your clips on the bottom, so just trimming the ends off of those and repositioning them should do the trick.  Trimming a small amount from the bottom of the plate would help as well.

                                            

7Dng5HI.jpg?1  AB4ZGKw.jpg

                                                         Reference images

8y0gVvv.jpg?1   uKcZQoZ.jpg?1

 

Centurion Suggestions:

Because Centurion photos show much more detail than EIB, items pertaining to Centurion might be seen there and not here. We try to point out all we can from what is seen but the final accuracy is the responsibility of the trooper.

 

1.  Your shoulder bells should be brought in a lot closer to your chest/back plates.  I noticed that you have quite a bit of return edge on the bottoms in some areas, all of which can be removed.  You may also want to consider a hot water bath to widen/reshape them to conform to your biceps and ride a lot closer in both the front and back.

 

CRL:  There should be a minimal gap between the shoulder armor and the chest/back plates

 

j7wyJnp.jpg?1  KXMlWmp.jpg?1

 

                                                                       Reference images

aztfHb8.jpg?1  Oa9hiis.jpg?1

 

x0ZMvQZ.jpg

 

We realize that not everyone can achieve the "perfect gap" as seen above, but with a bit of work I feel confident that you can get a lot closer. :duim:

 

2.  Super nice job on sizing those shims for your ab/kidney connection!  The gaps are spot-on, but you will need to use some ABS paste on the right side (like you did on the left) to cover the seam.

 

CRL:  A single visible seam line is present

 

tNL4l0j.jpg?1

 

3.  The ear bars should only have one bump painted black.  Easy fix!

CRL:  Ear bars shall have only one bump painted in black 

 

                                                                           Reference image

bSgQCm6.jpg?1    nbhQSJ9.jpg?1

 

Overall a really nice job, brother.  I am hoping you can get on these issues like you did the previous ones so that we can get you to Centurion!

  • Like 2
Posted

Hi again, Jose, and thank you for your both your patience and your ANH-Stunt  EI application.

CRL and EIB Application Requirements:
All required submission photos have been posted, and I am very pleased to announce your armor displays all the necessary elements to qualify for Expert Infantry. On behalf of the D.O. Staff, congratulations!     :salute:
 
Other-Armor Fit/Assembly:
In this section we review observations made by your fellow troopers and ourselves. Some observations may lead to suggestions to improve the overall look of your armor.
First, thank you for all the hard work in fixing the issues that have been discussed!  For the higher levels, it's all about looking your best and getting a close as you can to screen accuracy... here are a few other items that will help you do that, so let's dive right in!
 
1.  The tears on your helmet would look a lot better if extended to the inside edges of the indentation.
                                                                          Reference image
FlMnFKM.jpg?1&key=8b4a36fccaf91a5d6ad77b988f65320732e31feb03f0df6e82a9573c6a183fca  CfQXTQB.jpg&key=0d154eb0a90aa8fb824d877c9976d2fbd08025dde661fdaff0b3a010368fd93b
 
2.  Your vocoder looks good, but a bit of black paint and a "filbert" style brush would clean up the edges and make it look even better!
                                                                      Reference image
ezxfE4L.jpg?1&key=94860d01345428054b3c58b60dc9c7d9447880fd1430b2d149fe7374435234fe   XxI4GQH.jpg?1&key=d6c6145ffbb6a5ae3f4a4bd2d0488d66c335683a1dc114cfe43fa33883f636f5
 
3.  The tops of your shoulder bells should be touching (or very close to) your shoulder bridge.  I have some ideas for achieving this in the section below for you.
                                                                                                                         Reference image
Q6gG2gG.jpg?1&key=5df63184cf530a620d23758f9692854d80d45ec524adbae6a86ba8eda4d61f38   jMR5Uc0.jpg&key=bb2d798b43cb353c4cf8f84a1cc543d1978162e5756af454caf218cffa65411f
 
4.  For a much better look, your canvas belt could stand to be raised quite a bit in the back.  The front part meets the requirements for level 3 by touching the bottom of the center ab button plate, but that could come up more as well and still be acceptable for Centurion.
                                                                                       
                                                                                                                                                         
4WRJWzJ.jpg?1&key=c40e92606a4654d1fa2dc0638cbb9d8c91752d5f2cac52edd81c0ecf58cea622    Ac4M5Lc.jpg?1&key=a4faa32d76756c6db32eff0b1ee90f543292a9adfdc3b308b01ce42aca69e7d0
 
                                     Reference image
jFw7B00.jpg?1&key=6649d143fe554fe44d6b8a5a09bfa2950ca101bfe249dc780ba110efc39671eb
 
5.  Some of the buttons on your ab plates could be a bit smaller and more uniform in size.  Removing the paint and cleaning them up would take some time but would be well worth the effort and improve the look immensely.
                      
                                                                                                                      Reference image
 jvrZaaM.jpg?1&key=a0750fb166e8899f6170dba67195d4b579e1f8a35ba0c595d7b04310d6d9beba  bQt8pP7.jpg?2&key=e40a8e27b0530b68ea92bf2f28f0a8dd645c75eee7f77c0e0e2024335b351cc2
 
6.  You have your TD plate a little too far toward the front.  The "O" should basically face straight up.  I noticed that it touches the ends of your clips on the bottom, so just trimming the ends off of those and repositioning them should do the trick.  Trimming a small amount from the bottom of the plate would help as well.
                                            
7Dng5HI.jpg?1&key=23fde6ea1256ace92d29cb6aef67ec80d108f2023b51ef729dbf9983e210f9dc  AB4ZGKw.jpg&key=990f461cdabb8a488e4077ef9e7bd9a917503dc68f01667901ae7464e60e53e0
                                                         Reference images
8y0gVvv.jpg?1&key=fd4c8bccdedec33d65821e971d089d197dd83dedc3de3316a2d5c5c2f8a9ecf8   uKcZQoZ.jpg?1&key=4b025f29c64bec528153b42dfc58ab76f2419d1b784d59ff85ba042cba0d0210
 

Centurion Suggestions:

Because Centurion photos show much more detail than EIB, items pertaining to Centurion might be seen there and not here. We try to point out all we can from what is seen but the final accuracy is the responsibility of the trooper.
 
1.  Your shoulder bells should be brought in a lot closer to your chest/back plates.  I noticed that you have quite a bit of return edge on the bottoms in some areas, all of which can be removed.  You may also want to consider a hot water bath to widen/reshape them to conform to your biceps and ride a lot closer in both the front and back.
 
CRL:  There should be a minimal gap between the shoulder armor and the chest/back plates
 
j7wyJnp.jpg?1&key=30c0d9a4e4aa7a811462c15c08941ac646e566f7c61cbf8d57d89c3edb68f434  KXMlWmp.jpg?1&key=0a468d228855217c2257b582eba4e3d04e53f84aced2d0fc29cd5af0c6d5076c
 
                                                                       Reference images
aztfHb8.jpg?1&key=178f88a1f81613d3b950185c27c9b7e0c6e07119e090a31fdd7213ff07aec22b  Oa9hiis.jpg?1&key=fa73ad9875aa52717f1651c9da5e31ec1774a51bec0ef189c3c0445ffbcd94c1
 
x0ZMvQZ.jpg&key=126c72dcd0c0db1c5c9cf8a50ec6b8ea1b1c2b99c78bb447e70cacc9442a3a38
 
We realize that not everyone can achieve the "perfect gap" as seen above, but with a bit of work I feel confident that you can get a lot closer. :duim:
 
2.  Super nice job on sizing those shims for your ab/kidney connection!  The gaps are spot-on, but you will need to use some ABS paste on the right side (like you did on the left) to cover the seam.
 
CRL:  A single visible seam line is present
 
tNL4l0j.jpg?1&key=6cebb1b99f4ef720efc0bb2491928181d29efbf0d410b0575a60a7ef138e89fa
 
3.  The ear bars should only have one bump painted black.  Easy fix!
CRL:  Ear bars shall have only one bump painted in black 
 
                                                                           Reference image
bSgQCm6.jpg?1&key=aaeaa64cd9eccc41535c38c3722fa26ce1ccdd7f684a0c945d471ec52c5e0741    nbhQSJ9.jpg?1&key=22f8dadcdcaa5276a964e71e86ffa03a1a4b298100f8cb68fa1b9e71983f1809
 
Overall a really nice job, brother.  I am hoping you can get on these issues like you did the previous ones so that we can get you to Centurion!

I’m already working on it, guys....
Level 3....
YOUR NEXT !!!


Sent from my iPhone using Tapatalk
  • Like 1
Posted
11 minutes ago, TK 71627 said:


I’m already working on it, guys....
Level 3....
YOUR NEXT !!!

LOVE that attitude, Jose!! :jc_doublethumbup:  We will have you out there making the Star Garrison proud as a Centurion before you know it!

  • Like 1
Posted

Congratulations Jose!

 

Welcome to the Advanced Ranks Trooper!:salute:

 

Nice to see you're hitting those easy fixes quickly. 

See you at Centurion soon!

  • Like 1
Posted
Congratulations Jose!
 
Welcome to the Advanced Ranks Trooper!:salute:
 
Nice to see you're hitting those easy fixes quickly. 
See you at Centurion soon!

Ty, so much .... I’m SO HAPPY !


Sent from my iPhone using Tapatalk
Posted
Congrats!!!

Ty u CMDR.... did u submit to level 3 ???


Sent from my iPhone using Tapatalk
Posted
LOVE that attitude, Jose!! :jc_doublethumbup:  We will have you out there making the Star Garrison proud as a Centurion before you know it!

What EIB # am I, Joseph ?


Sent from my iPhone using Tapatalk
Posted
Just now, TK 71627 said:


Ty u CMDR.... did u submit to level 3 ???


Sent from my iPhone using Tapatalk

No have had a lot going on. Its not easy being a Commander

  • Like 1
Posted
No have had a lot going on. Its not easy being a Commander

I better not beat u to level 3....lol


Sent from my iPhone using Tapatalk
  • Like 1
Posted

Congratulations trooper and welcome to the rank 

  • Like 1
Posted
Congratulations trooper and welcome to the rank 

Ty, gmrhodes.... I’m not done YET !!!


Sent from my iPhone using Tapatalk
  • Like 1
Posted
42 minutes ago, TK 71627 said:

I got a lot of work to achieve Level 3-CENTURION !!!

Yes but it will all be worthwhile for that certificate and banner on your forum profile ;) 

 

Good luck

  • Like 1
Posted
congratulations!

I appreciate it giskard !!!

 

 

Sent from my iPhone using Tapatalk

Posted
Yes but it will all be worthwhile for that certificate and banner on your forum profile  
 
Good luck

Fingers crossed!!!


Sent from my iPhone using Tapatalk
  • Like 1

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...