Mupfel’s E11 Blaster Build (with Doopydoo’s Resin Kit + T-Jays Completion Kit + 3D Print Additions + Arduino Electronics)

[Mupfel]

Hi Dennis,

I used a flat black for all parts, even for the handle, as i do not like the glossy appearing :-).

Thanks for the comments, hopefully today i will be able to go on.


Gesendet von iPhone mit Tapatalk

[Mupfel]

Today i spent some more time in assembling the blaster and some minor details, like adding more realistic letters on the scope with a wax crayon... on the back of the barrel you can see my TK ID , 24717, hammered into the resin with hammering letters, sorry for the wording, but i cannot find the correct translation. The number 4 i have to do again, as the wax is not remaining inside.

 

Now it looks more and more like a blaster and i am getting happier and happier when i see the result :-) :-) :-)

 

 

 

 

A detailed pictore of the charging and programming port... in the end cap clip you can see the speaker, which had to be replaced twice already... meanwhile i know the reason  why it blew up twice :-)

 

 

 

 

 

Here you can see the main switch, placed in between two magnets of the completion kit from Tino. Only if this switch is switched on, the blaster can be activated.

 

 

More pictures are following once everything has been checked and if it is working properly.

 

Have a anice evening guys!

[T-Jay[TK]]

Once finished, you need to do a little video clip to show it in action.

[Mupfel]

Sure thing :-), will do.

 

 

Gesendet von iPhone mit Tapatalk

 

[Aradun[TK]]

On 8/6/2019 at 2:45 AM, Mupfel said:

Hi Dennis,

I used a flat black for all parts, even for the handle, as i do not like the glossy appearing :-).

Thanks for the comments, hopefully today i will be able to go on.


Gesendet von iPhone mit Tapatalk

Thanks Marko and thanks T-Jay for the link.

[Mupfel]

This evening i spent about 45 minutes to cover all the parts that should not be painted silver... the paintjob itself took about 5 minutes in total...

 

Tomorrow i will reveal the finish...

 

 

 

 

 

 

Have a great evening guys...!

 

Edited August 19, 2019 by Mupfel

[Bulldog44[TK]]

Looking forward to seeing the results! Great build thread and great effort put into this blaster. 

[Sly11[Admin]]

Tremendous work !! 

[Mupfel]

Thanks guys, i can‘t wait to remove the paper as well :-).




Gesendet von iPhone mit Tapatalk

[Mupfel]

Finally, the result of the painting... but i am not satisfied. Probably need to do it again.

 

What do you think?

 

 

 

 

 

 

 

Now, i will start to create the ejection bolt parts out of wood...

 

Thanks for commenting and posting guys!

 

Have a great evening.

 

 

Edited August 20, 2019 by Mupfel

[T-Jay[TK]]

12 hours ago, Mupfel said:

Finally, the result of the painting... but i am not satisfied. Probably need to do it again. What do you think?   (...)

Maybe you can make some corrections with a small brush. From the pictures everything looks good. What exactly are you not happy with?

 

[Mupfel]

I will try it with a brush, yes...

I am not satisfied with the tape, which i placed to cover the black painting...

A more detailed picture is needed to see that, i think...




Gesendet von iPhone mit Tapatalk

[Bulldog44[TK]]

Hi Marko. The paint job looks great from what I can see. Nice rich black coat and the silver detailing really pops. 

[Dracotrooper]

Looking marvelous! Nice clean look from the factory

Sent from my SM-G960W using Tapatalk