Aardvark891 WTF kit

[aardvark891[TK]]

My first kit. Trimming pieces down.

I'm noticing my body is a bit bigger than what I thought. 

Is a hot bath the best way to loosen up the plastic or are there other techniques that have been used?

 

Edited August 12, 2018 by aardvark891

[StrmTRPR85[TK]]

Welcome!  A couple questions on your build, are you aiming for higher level approvals?

 

what parts are going to need to be larger? forearms, abs, shins etc?

 

A hot water bath will definitely help with fitting but some things may need to be trimmed larger or even shimmed.

 

Post up some pictures and lots of detail on what is not fitting and we will get you where you want to be.

 

I have a WTF kit myself and very pleased with the kit and also the customer service Walt provides.

[lucnak[TK]]

Hi Robert, a bit more info and maybe some photos will help us answer your questions, as Jeff mentioned.

[ukswrath[Staff]]

Photos, photos, photos lol

[justjoseph63[Staff]]

As mentioned, some photos of the areas in question would help immensely, Robert!  I have found that the easiest way to do this is sign up for a free imgur account, which lets you edit and post pics here.  For more info., here is a thread that will help:

https://www.whitearmor.net/forum/topic/42381-howto-post-images-in-threads-using-imgur-easy/

 

[StrmTRPR85[TK]]

I used Google photos for all my pictures

 

 

[hollowbodies[501st]]

Hi there and welcome! Hot baths are a good way... can't wait to see some pics of your progress!

[TheSwede[TK]]

Hey Robert and like other have said - photos 

[aardvark891[TK]]

--------------

Edited May 6, 2022 by gmrhodes13
link removed no longer working

[aardvark891[TK]]

It feels tight on lower area. I know I need more trimming, but I'm being a bit cautious about it. 

[ukswrath[Staff]]

Remove as much return edge as you need. !/8" remaining is a nice safe number.

[aardvark891[TK]]

First glued part.

Sewing my own hooks as well.

http://imgur.com/a/GxRlRTn

[aardvark891[TK]]

Hi all!

Here is a mock up before fastening.

I'm finding that leaving it in a mock up over night helps with some fitting.

Tell me what you think.

https://photos.app.goo.gl/1SH9NNdeSQEjxTJy8

[aardvark891[TK]]

Measured shims and made joint strips . My shims are 2 inches wide. 

I made them a bit bigger do I can trim if needed.

I measured my true waist, 41". Then I mated the ab and kidney with tape, 37.5 ". Did the math to get shim size equal on both sides.

https://photos.app.goo.gl/khRsFmJxSnshepcn8

Edited August 12, 2018 by aardvark891

[TheSwede[TK]]

Hey

could you try and upload the pics directly into the thread? 

[StrmTRPR85[TK]]

Now time to make abs paste, and smooth it out!

[magni[TK]]

Don't forget Robert. Shims go on kidney.

Good Luck!

[Str8 Shooter Stormtrooper]

Following. I have the same kit and am 5'8" 180 lbs.  I've found it a bit tight on my chest.  Did you use water bath?

 

[aardvark891[TK]]

On 8/12/2018 at 4:59 PM, TheSwede said:

Hey

could you try and upload the pics directly into the thread? 

I tried that one app. Couldn't get it to work. I have an S8. 

I'd love to though

[aardvark891[TK]]

Ripped off other shims. Didn't look right.

Re did it and looks better.

Will takes some paste and sanding. But I'm happy .

https://photos.app.goo.gl/SfE8R4F6tuhGv9A2A

[StrmTRPR85[TK]]

2 hours ago, aardvark891 said:

I tried that one app. Couldn't get it to work. I have an S8. 

I'd love to though

follow this 

 

It works from phone or your computer.  If from phone make sure you highlight the code that is generated and select all.  It will populate the photos directly into your thread.  Its what I used 

[aardvark891[TK]]

[ukswrath[Staff]]

Looking good Robert . IF you don't mind me asking are you shooting for Expert Infantry or Centurion?

[StrmTRPR85[TK]]

11 minutes ago, ukswrath said:

Expert Infantry or Centurion

You should join me Ohio Garrison buddy

[aardvark891[TK]]

Yes. Going to join Ohio Garrison. 

Right now I'm going for basic. I will be upgrading asap to get to Centurion.