Ensi[TK] Posted September 15, 2018 Author Report Posted September 15, 2018 5 hours ago, TheLorelei said: Those traps look amazing!! Great work! I'm also impressed by how well you can clean up that bleeding around the stencil edges. That would scare me stiff. Gives me hope! Thank you! The trick I used was to lightly score the semi-hardened paint with a blade, then use the back of the blade to scrape away the outline. Scraped away everything else with a toothpick and cotton swabs You can do it! 4 hours ago, CableGuy said: That bucket is looking tasty!! :-) That’s one beautiful belt, too. Burkbench use about 8 layers of fabric to build that up, if I remember correctly. Lovely craftsmanship. Keep up the great work. :-) 3 hours ago, ukswrath said: Beautiful work on the helmet and yes those belts are spectacular looking. Thanks guys! Might have to bend my TD clips more because it's so big lol. 2 hours ago, TheSwede said: Looks like we`re belt-buddies as well as Garrison Mine is TM but they seem to be equally familiar with screen accuracy And name buddies too! Are you me? Quote
gmrhodes13[Staff] Posted September 15, 2018 Report Posted September 15, 2018 A bit late now but a tip to help with bleed through is paint white first, then if it bleeds it’s not as noticeable, nice work on the paint job 1 Quote
Ensi[TK] Posted September 16, 2018 Author Report Posted September 16, 2018 Helmet finished (except the fancy internals) Belt assembly finished, had some trouble with a bad rivet gun but nothing a dremel can't fix. Rivet into snap and snaps on the holster for ease of transportation. (Note: this is a mirrored shot, my holster is on the left side as it should be ) Drop-box loops curing. I can do it in this order because my ABS belt is snapped to the cloth belt. TD panel curing until tomorrow Ab buttons. I originally bought a circle cutter for making my own masking templates but said oh heck it and went freehand. And the last little detail.. Which I saved for last.. The white elastic band for the shoulder bridges Next post will probably be approval pictures And then on to EIB and Centurion 1 Quote
Ensi[TK] Posted September 16, 2018 Author Report Posted September 16, 2018 Approval photos sent in! Let me know if you notice anything that could hold me back from basic/EIB/Centurion I'll have to make the bracket/slot system for the kidney->ab sides to make them stay put. Also maybe lower forearms a bit I think. 3 Quote
ukswrath[Staff] Posted September 17, 2018 Report Posted September 17, 2018 Looking good so far. Won't know any more about the approval until you submit and we review it. Quote
Frank75139[501st] Posted September 17, 2018 Report Posted September 17, 2018 Nicely doneSent from my iPhone using Tapatalk Quote
lucnak[TK] Posted September 17, 2018 Report Posted September 17, 2018 Is your canvas belt narrower than your ABS belt? Only other thing I can see if you will probably want to lower your forearms to even out the black space at the elbow and in the gap between forearm and handplate. Otherwise, looking real good! Quote
CableGuy[TK] Posted September 17, 2018 Report Posted September 17, 2018 Nice job, Daniel. Good luck with clearance. Quote
Ensi[TK] Posted September 17, 2018 Author Report Posted September 17, 2018 (edited) 16 hours ago, ukswrath said: Looking good so far. Won't know any more about the approval until you submit and we review it. Thanks Tony. I'll have them in as soon as I get basic and my E-11 from Praetorian 14 hours ago, Frank75139 said: Nicely done Sent from my iPhone using Tapatalk 22 minutes ago, CableGuy said: Nice job, Daniel. Good luck with clearance. Thanks guys! Walking around with this ABS suit was SOOOO much different from walking around in my fibreglass Jimmiroquai TFA 44 minutes ago, lucnak said: Is your canvas belt narrower than your ABS belt? Only other thing I can see if you will probably want to lower your forearms to even out the black space at the elbow and in the gap between forearm and handplate. Otherwise, looking real good! The forearms can be adjusted more downwards as I sewed velcro onto the bicep->forearm elastic And I agree with that, they could come down. I also sanded the branding off the gloves (barely visible in the photos). My ABS belt is just a smidge wider than my cloth belt luckily. I trimmed the ABS belt further when building as I saw from reference they were very close to the boxes. Not exactly the sizes I was hoping for but it works I think Edited September 17, 2018 by Ensi 1 Quote
Ensi[TK] Posted September 19, 2018 Author Report Posted September 19, 2018 Just got my approval I'm now TK-61514, wait.. TKTK-61514? 3 Quote
CableGuy[TK] Posted September 19, 2018 Report Posted September 19, 2018 Just got my approval:duim: I'm now TK-61514, wait.. TKTK-61514? Great news, Daniel. Well done!! :-) Quote
ukswrath[Staff] Posted September 19, 2018 Report Posted September 19, 2018 Awesome Daniel, congrats brother Quote
gmrhodes13[Staff] Posted September 19, 2018 Report Posted September 19, 2018 Congratulations trooper Quote
Ensi[TK] Posted September 20, 2018 Author Report Posted September 20, 2018 Thanks all!! Next task is making the torso tab/lock system and also lengthen my TD strips a bit as the white panel isn't facing upwards enough it seems. Thoughts? Already have suitable material so can give it a go this sunday 1 Quote
Ensi[TK] Posted September 20, 2018 Author Report Posted September 20, 2018 Still also waiting on Praetorian Blasters for the E-11 Quote
ukswrath[Staff] Posted September 20, 2018 Report Posted September 20, 2018 1 hour ago, Ensi said: Thanks all!! Next task is making the torso tab/lock system and also lengthen my TD strips a bit as the white panel isn't facing upwards enough it seems. Thoughts? Already have suitable material so can give it a go this sunday Yours isn't bad at all but you can twist the TD up onto the clips if you wish. Pick an angle Here's a few reference photos 1 Quote
Ensi[TK] Posted October 28, 2018 Author Report Posted October 28, 2018 Thanks for all the help in this build, I really appreciate it! I'm struggling to get Praetorian Blasters to ship my ANH E-11, so I can't apply for level 2/3 yet. In the meantime i've been trooping and have done some adjustments in preparation for the applications. First fix is the shoulder-bells. I think they are really small for me, but I can make it work. Here you can see the elastic being pulled out, exposing a huge gap: Pretty cool pic tho! yes i'm using a borrowed ESB E-11 please don't kill me The fix was replacing the chest to back shoulder elastic with white polyester webbing. I also moved the snap on the shoulderbell and removed all return edge to make them sit better. Looks like there is return edge left but it's just the super thick ATA plastic And maybe a minor detail, but when I painted the outermost tooth I slipped and ended up painting over the last un-cut tooth. Gonna remove that little bit of paint to make it more like the reference pics i've seen. 1 Quote
Ensi[TK] Posted October 29, 2018 Author Report Posted October 29, 2018 13 hours ago, TheSwede said: I have another version of that pic showing mostly unpainted, I guess both can roll still not used to this whole "put together haphazardly" thing 1 Quote
ukswrath[Staff] Posted October 30, 2018 Report Posted October 30, 2018 Most common is paint to the gum line Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.