FarEast[TK] Posted June 16, 2018 Report Posted June 16, 2018 (edited) Name: James Machin Future Garrison/Squad/Outpost or local area : Japan or U.K Armor maker: Shepperton Design Studios Helmet maker: Shepperton Design Studios Cloth belt maker: Imperial Issue Neck seal maker: Shepperton Design Studios Boot maker: TK Boots Blaster maker: Shepperton Design Studios Height: 188cm Weight: 84kg TK Type: ANH TK Stunt Helmet: Blaster: Edited June 16, 2018 by FarEast Quote
CableGuy[Admin] Posted June 16, 2018 Report Posted June 16, 2018 Hi JamesLooks like you’ve made a great job of that overall. Especially as you’re a taller trooper. Basic should be easily in reach. It terms of overall appearance, I’d probably just suggest reducing the bicep/forearm gap at your elbow. Best of luck with clearance. :-) Quote
FarEast[TK] Posted June 16, 2018 Author Report Posted June 16, 2018 (edited) 12 minutes ago, CableGuy said: Hi James Looks like you’ve made a great job of that overall. Especially as you’re a taller trooper. Basic should be easily in reach. It terms of overall appearance, I’d probably just suggest reducing the bicep/forearm gap at your elbow. Best of luck with clearance. :-) Many thanks - Boy Its a nightmare taking photos on your own, running back and forth to the camera and back checking the armour to makes sure nothing has popped off or misaligned. I think because the elastic from the shoulder bell twas over the bicep they rode up the arm. I can resubmit this photo with the biceps pulled rather down. Also maybe the forearms need to go up a little. I was more focused on the breastplate and sniper knee that wants to swivel round. Edited June 16, 2018 by FarEast Quote
CableGuy[Admin] Posted June 16, 2018 Report Posted June 16, 2018 No worries mate. You’ve done a good job. Regarding the shins, if you haven’t already, you can fit Velcro to the front of your boot (and opposite on inside of shin) and/or poppers at around the back (calves) attaching them to the boot tabs. I have both methods on mine (link in signature) and they haven’t twisted at all so far over 5 troops... and LOTS of stairs!! LolSent from my iPhone using Tapatalk Quote
FarEast[TK] Posted June 16, 2018 Author Report Posted June 16, 2018 7 minutes ago, CableGuy said: No worries mate. You’ve done a good job. Regarding the shins, if you haven’t already, you can fit Velcro to the front of your boot (and opposite on inside of shin) and/or poppers at around the back (calves) attaching them to the boot tabs. I have both methods on mine (link in signature) and they haven’t twisted at all so far over 5 troops... and LOTS of stairs!! Lol Sent from my iPhone using Tapatalk Awesome - I will go the popper route as I have plenty left! So the next question is - what do I do next! Quote
CableGuy[Admin] Posted June 16, 2018 Report Posted June 16, 2018 Feel free to leave your post up on here for a little bit longer to get some more feedback. Then you’ll need to get in contact with your Garrison to start the approval process. :-)Sent from my iPhone using Tapatalk Quote
TheSwede[TK] Posted June 16, 2018 Report Posted June 16, 2018 Looking good I second what Dan already said and only thing I have to ad is to put a drop of glue to keep that knee ammobelt in place - good luck on approval Quote
FarEast[TK] Posted June 16, 2018 Author Report Posted June 16, 2018 3 minutes ago, TheSwede said: Looking good I second what Dan already said and only thing I have to ad is to put a drop of glue to keep that knee ammobelt in place - good luck on approval Ahhh yes! I actually sneaked a bit of tape behind it. 1 Quote
magni[TK] Posted June 16, 2018 Report Posted June 16, 2018 Your shins in back look like they both close in same direction. The right one needs to close to the inside. 1 Quote
FarEast[TK] Posted June 16, 2018 Author Report Posted June 16, 2018 11 minutes ago, magni said: Your shins in back look like they both close in same direction. The right one needs to close to the inside. Well spotted!!! Fortunately the glue hasn’t fully cured so I could remove it without a problem!! Currently cutting a new strip!!! 1 Quote
wook1138[TK] Posted June 16, 2018 Report Posted June 16, 2018 Looks good. I think everything has been mentioned. The main thing for me was the black between the bicep and forearm. I would try to bring those forearms up a touch - the black between the hand guards and the forearm should be balanced with the amount of black at the elbow if possible. Good luck with approval! Quote
FarEast[TK] Posted June 16, 2018 Author Report Posted June 16, 2018 1 minute ago, wook1138 said: Looks good. I think everything has been mentioned. The main thing for me was the black between the bicep and forearm. I would try to bring those forearms up a touch - the black between the hand guards and the forearm should be balanced with the amount of black at the elbow if possible. Good luck with approval! My garrison GML has already approved the build and asked for a couple more photos for my legion profile photos!! I will suit up again tomorrow and ballance our the bicep, forearm gap and post those here too. 2 Quote
gmrhodes13[Staff] Posted June 16, 2018 Report Posted June 16, 2018 Great news, looking forward to seeing you with numbers soon, well done 1 Quote
menschie[TK] Posted June 17, 2018 Report Posted June 17, 2018 On 6/16/2018 at 6:28 AM, FarEast said: My garrison GML has already approved the build and asked for a couple more photos for my legion profile photos!! I will suit up again tomorrow and ballance our the bicep, forearm gap and post those here too. Congratulations. Looking forward to officially welcoming you to the 501st soon! Quote
Bulldog44[TK] Posted June 17, 2018 Report Posted June 17, 2018 Great job on your armor and it shows. Lots of work put in but worth it. Quote
FarEast[TK] Posted June 17, 2018 Author Report Posted June 17, 2018 TK19758 Reporting for duty! 3 Quote
gmrhodes13[Staff] Posted June 18, 2018 Report Posted June 18, 2018 Congratulations and welcome to the ranks trooper Quote
Bulldog44[TK] Posted June 18, 2018 Report Posted June 18, 2018 Congratulations James!!!!! Welcome to the 501st and many happy troops to you! So happy to have you aboard and look forward to seeing you in your armor soon!!!! おめでとうございます！！ Quote
Frank75139[501st] Posted June 18, 2018 Report Posted June 18, 2018 Another one joins the ranks!Sent from my iPhone using Tapatalk 1 Quote
Bulldog44[TK] Posted June 18, 2018 Report Posted June 18, 2018 Also, head to the newly approved section and post up your introduction so more members see you have your new TK digits! https://www.whitearmor.net/forum/forum/160-newly-approved-members-sound-off/ 1 Quote
SgtGarand[TK] Posted June 18, 2018 Report Posted June 18, 2018 Awesome and congrats on the approval! If you're in Japan then you can sign up for the garrison forums as well to see any events taking place near you One parting thing I noticed is the cover strip on your right thigh seems a bit taller and pointed at the top. May not feel so great if that ever decided to poke you. lol Have fun trooper 1 Quote
FarEast[TK] Posted June 18, 2018 Author Report Posted June 18, 2018 5 hours ago, SgtGarand said: Awesome and congrats on the approval! If you're in Japan then you can sign up for the garrison forums as well to see any events taking place near you One parting thing I noticed is the cover strip on your right thigh seems a bit taller and pointed at the top. May not feel so great if that ever decided to poke you. lol Have fun trooper Already a member of the garrison and have been posting this build and also my Shoretrooper build there - its a bit quiet even for the outer rim though. 1 Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.