TK-40996[TK] Posted May 10, 2018 Report Posted May 10, 2018 (edited) Name : Ilan boogaerts ID : TK-40996 forum name : ilbo1996 garrisson : Belgian Garrison Flanders dragon squad armor : RS propmasters Helmet : RS propmasters blaster : E11 RS propmasters Belt , hand plates , neck seal , boots , ... : RS propmasters height : 1,82 m Weight : 76 kg age : 21 Before shortening the straps on shoulders ; AFTER SHORTENING SHOULDERS STRAPS : I believe that’s all ? If you need something else let me know ! Thanks ! Edited May 13, 2018 by Ilbo1996 Quote
CableGuy[TK] Posted May 10, 2018 Report Posted May 10, 2018 Great job, Ilan. :-) Looking good for EIB. Based on previous applications, I’m guessing you might be given the suggestion of shortening the straps on your shoulder bells to reduce the gap. Here’s a ref pic. Just one other tiny thing - the cod and butt plate fixings are usually left un-painted. I don’t think either of these will get in the way of your application - they might just come up as suggested improvements. Excellent job!!! Best of luck. Dan Sent from my iPhone using Tapatalk 1 Quote
TheSwede[TK] Posted May 10, 2018 Report Posted May 10, 2018 What Dan said about the shoulder bells and fixings and - looking good 1 Quote
TK-40996[TK] Posted May 10, 2018 Author Report Posted May 10, 2018 Thanks guys I wil work on it ! Quote
TK-40996[TK] Posted May 11, 2018 Author Report Posted May 11, 2018 Hi guys does anyone know how long it takes before they look at your request ? I see that there are guys that posted later as me and they are reviewed ? Sorry for the impatient!! Quote
TheSwede[TK] Posted May 11, 2018 Report Posted May 11, 2018 I understand you are eager to get approved (as we all are)please be patient and the team will sort you out as soon as they can - usually within a week or less 1 Quote
TK-40996[TK] Posted May 13, 2018 Author Report Posted May 13, 2018 Hi so I shortened the straps on my shoulder bels like you guys said , is this better ? 1 Quote
TheSwede[TK] Posted May 13, 2018 Report Posted May 13, 2018 3 hours ago, Ilbo1996 said: Hi so I shortened the straps on my shoulder bels like you guys said , is this better ? Looks great 1 Quote
CableGuy[TK] Posted May 13, 2018 Report Posted May 13, 2018 Hi so I shortened the straps on my shoulder bels like you guys said , is this better ? Superb!! Job well done, sir. :-)Sent from my iPhone using Tapatalk 1 Quote
justjoseph63[Staff] Posted May 15, 2018 Report Posted May 15, 2018 On 5/11/2018 at 2:47 PM, Ilbo1996 said: Hi guys does anyone know how long it takes before they look at your request ? Nice job on shortening those shoulder straps, Ilan! I am working on your application now, brother. 1 Quote
justjoseph63[Staff] Posted May 21, 2018 Report Posted May 21, 2018 Sorry for the dealy, Ilan, but the paint on the cod rivet and posterior snaps will have to be removed before proceeding. Can you take photos of each after removing the paint and post them here? Almost there, sir, almost there. Quote
TK-40996[TK] Posted May 21, 2018 Author Report Posted May 21, 2018 18 minutes ago, justjoseph63 said: Sorry for the dealy, Ilan, but the paint on the cod rivet and posterior snaps will have to be removed before proceeding. Can you take photos of each after removing the paint and post them here? Almost there, sir, almost there. Done Quote
illusionz_09[TK] Posted May 23, 2018 Report Posted May 23, 2018 Looking good. And great job on the shoulder and snap/paint fixes. Everything should be in order for approval now. my only suggestion for the future would be slimming down the thighs. They look big on you lol... but that is preference. no one is blaming you for having slimmer thighs lol Move Along Quote
TK-40996[TK] Posted May 23, 2018 Author Report Posted May 23, 2018 1 hour ago, illusionz_09 said: Looking good. And great job on the shoulder and snap/paint fixes. Everything should be in order for approval now. my only suggestion for the future would be slimming down the thighs. They look big on you lol... but that is preference. no one is blaming you for having slimmer thighs lol Move Along Yeah I have a big prob on the thighs haha , I got a football injury and lost a lot of muscles in my legs :s said to myself get back to that gym lad !!! Quote
justjoseph63[Staff] Posted May 24, 2018 Report Posted May 24, 2018 Hi, Ilan! Thank you for your EI application... let's jump right in. CRL and EIB Application Requirements: All submission photos are present. Always great to see a well built set of RS armor, and with that said, your armor displays all the necessary elements to qualify for Expert Infantry. Congratulations, and welcome to the ranks! Other-Armor Fit/Assembly: In this section we review observations made by your fellow troopers and ourselves. Some observations may lead to suggestions to improve the overall look of your armor. Excellent job in fixing the shoulder bell gap. Doing that also brought it closer to the chest plate and back plate. Nice work! You have a pretty large gap between the top of the thighs in the back and the posterior plate. It looks as if they were not pulled up all the way in that photo, but you should try raising them up by an inch or so. There is room to work with in the front, which would also bring them closer to the ab/cod as seen in the reference image. You may also want to add a piece of foam on the inside of the front, which would pull the forward a bit. Reference images Lastly, the cover strips on your shins should line up with the cover stips on the thighs. This is a very common problem, (I had it myself), but it can be easily remedied by adding some 3 cm x 3 cm x 25 cm strips of foam on the inside over the interior front cover strips. Reference image Your posterior plate needs to be closer to your kidney, which can be done by tightening or replacing the strapping; Reference image In one of your action shots, your belt seems to have come unsnapped from your ab plate. You may consider adding another snap or some Velcro which will help to keep this from happening again. Reference image Centurion Suggestions:In this section we prepare you for Centurion. If there were any areas of concern they would be discussed here. In addition to above items, the outer edges of the drop boxes will need to align with the outside edges of the ABS belt. You may need to lengthen the left drop box by a few mm. In several shots it looks to be in front of the ABS belt or angled. The one on your right side right is perfect!! Reference image Reference image Really nice looking armor,, Ilan, and one you should certainly be proud of! Just a few items to work on, and I hope to see your Centurion application afterward! When you submit for level 3, please include a close-up photo of the outside edge of your sniper knee plate. Thanks! Quote
Sly11[Admin] Posted May 24, 2018 Report Posted May 24, 2018 Congratulations and welcome to the rank. Quote
TK-40996[TK] Posted May 24, 2018 Author Report Posted May 24, 2018 2 hours ago, justjoseph63 said: Hi, Ilan! Thank you for your EI application... let's jump right in. CRL and EIB Application Requirements: All submission photos are present. Always great to see a well built set of RS armor, and with that said, your armor displays all the necessary elements to qualify for Expert Infantry. Congratulations, and welcome to the ranks! Other-Armor Fit/Assembly: In this section we review observations made by your fellow troopers and ourselves. Some observations may lead to suggestions to improve the overall look of your armor. Excellent job in fixing the shoulder bell gap. Doing that also brought it closer to the chest plate and back plate. Nice work! You have a pretty large gap between the top of the thighs in the back and the posterior plate. It looks as if they were not pulled up all the way in that photo, but you should try raising them up by an inch or so. There is room to work with in the front, which would also bring them closer to the ab/cod as seen in the reference image. You may also want to add a piece of foam on the inside of the front, which would pull the forward a bit. Reference images Lastly, the cover strips on your shins should line up with the cover stips on the thighs. This is a very common problem, (I had it myself), but it can be easily remedied by adding some 3 cm x 3 cm x 25 cm strips of foam on the inside over the interior front cover strips. Reference image Your posterior plate needs to be closer to your kidney, which can be done by tightening or replacing the strapping; Reference image In one of your action shots, your belt seems to have come unsnapped from your ab plate. You may consider adding another snap or some Velcro which will help to keep this from happening again. Reference image Centurion Suggestions:In this section we prepare you for Centurion. If there were any areas of concern they would be discussed here. In addition to above items, the outer edges of the drop boxes will need to align with the outside edges of the ABS belt. You may need to lengthen the left drop box by a few mm. In several shots it looks to be in front of the ABS belt or angled. The one on your right side right is perfect!! Reference image Reference image Really nice looking armor,, Ilan, and one you should certainly be proud of! Just a few items to work on, and I hope to see your Centurion application afterward! When you submit for level 3, please include a close-up photo of the outside edge of your sniper knee plate. Thanks! So if I want to applicate for centurion do I need to change everything you said or only the things under the centurion suggestions ? Greetz and thanks !!! Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.