TK-50101 Blue Snaggletooth[TK] Posted April 18, 2018 Report Posted April 18, 2018 Wanted to show you my interpretation of the original R1 rubber cast Hengstler counter. I build this replica with: - original Hengstler 400 plastic counter - original Hengstler 400 plastic socket - replica resin eagle sidewall - kneadatite green stuff - plasti dip paint my reference pics: Quote
TK-50101 Blue Snaggletooth[TK] Posted April 18, 2018 Author Report Posted April 18, 2018 my Hengstler counter for this project: Quote
TK-50101 Blue Snaggletooth[TK] Posted April 18, 2018 Author Report Posted April 18, 2018 (edited) started cutting out the socket sidewindow: disassembled the pins and closed all holes with green stuff: Edited April 18, 2018 by TK-50101 Blue Snaggletooth Quote
TK-50101 Blue Snaggletooth[TK] Posted April 18, 2018 Author Report Posted April 18, 2018 (edited) cutted out the clean sidewall: installed my resin replica eagle sidewall: disassembled all unnecessary inner parts, installed real srews in the sidewall, fixed the reset button (pressed mode): Edited April 18, 2018 by TK-50101 Blue Snaggletooth Quote
TK-50101 Blue Snaggletooth[TK] Posted April 18, 2018 Author Report Posted April 18, 2018 filled the Hengstler engraving from the top part with green stuff: drilled the screw holes into the top part and installed real screw heads, smoothen the edges: Quote
TK-50101 Blue Snaggletooth[TK] Posted April 18, 2018 Author Report Posted April 18, 2018 sprayed 3 layers with plasti dip for a nice rubber surface, my final result: Quote
SlyFox740[TK] Posted April 25, 2018 Report Posted April 25, 2018 Awesome job, Good attention to detail but if you look closely at those pictures you posted from my reference thread you’ll see the Rogue One Counter actually has the small (mini) eagle logo, it’s close but that one you’ve used is the medium size eagle logo. If you could correct this then it would be an absolutely perfect replica! Quote
TK-50101 Blue Snaggletooth[TK] Posted April 25, 2018 Author Report Posted April 25, 2018 1 hour ago, SlyFox740 said: Awesome job, Good attention to detail but if you look closely at those pictures you posted from my reference thread you’ll see the Rogue One Counter actually has the small (mini) eagle logo, it’s close but that one you’ve used is the medium size eagle logo. Hard to see but maybe you are right with the smaller eagle on the R1 counter. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.