Commander Gree[501st] Posted June 29, 2018 Author Report Posted June 29, 2018 Ok, I think I am going to try and get my belt completed this weekend. Question about the drop boxes, Can I use snaps or just glue them to the straps to hang from the belt, or do they need to be rivets that hold them in. I would like snaps because I could then remove the boxes for whatever reason, be it to rework them as actual working boxes or whatever? Going for L3 here so need to take that into account if it matters. CRL was no help for this. Quote
Pretzel Posted June 29, 2018 Report Posted June 29, 2018 33 minutes ago, Commander Gree said: Ok, I think I am going to try and get my belt completed this weekend. Question about the drop boxes, Can I use snaps or just glue them to the straps to hang from the belt, or do they need to be rivets that hold them in. I would like snaps because I could then remove the boxes for whatever reason, be it to rework them as actual working boxes or whatever? Going for L3 here so need to take that into account if it matters. CRL was no help for this. Just so I understand you correctly, are you referring to the pop rivets on the back on the drop boxes circled in Red? 1 Quote
Commander Gree[501st] Posted June 29, 2018 Author Report Posted June 29, 2018 1 minute ago, Pretzel said: Just so I understand you correctly, are you referring to the pop rivets on the back on the drop boxes circled in Red? YES! lol. thank you for posting that pic. yes that is what im asking. Can I use snaps there, or can I just glue that down. or does it need to be riveted for L3 approval? Quote
LTM[TK] Posted June 29, 2018 Report Posted June 29, 2018 (edited) I made mine snaps so I can switch to HWT and back as needed. I also added a little bit of weight to keep them down and not flipping all over the place. In this pic, you can see the back of the snap Edited June 29, 2018 by LTM 1 Quote
Commander Gree[501st] Posted June 29, 2018 Author Report Posted June 29, 2018 3 minutes ago, LTM said: I made mine snaps so I can switch to HWT and back as needed. I also added a little bit of weight to keep them down and not flipping all over the place. In this pic, you can see the back of the snap My biggest concern is the L3 approval. I have seen people get knocked for stuff that isn't listed in the CRL but is "screen accurate" and missing from the build. My opinion is that if it isn't seen, it shouldn't matter. But I know they need picks of the back of the belt when applying, so was wondering if it was to check for the rivets or purely that there was an inner box. just curious, how do you close your boxes? Quote
LTM[TK] Posted June 29, 2018 Report Posted June 29, 2018 I don't think it needs to be rivets, but will wait for others to chime in. I permanently closed my boxes 1 Quote
Pretzel Posted June 29, 2018 Report Posted June 29, 2018 37 minutes ago, Commander Gree said: My biggest concern is the L3 approval. I have seen people get knocked for stuff that isn't listed in the CRL but is "screen accurate" and missing from the build. My opinion is that if it isn't seen, it shouldn't matter. But I know they need picks of the back of the belt when applying, so was wondering if it was to check for the rivets or purely that there was an inner box. just curious, how do you close your boxes? I cannot speak for it being approved or denied. I personally do not see it being an issue for Level 2 or Level 3 if you use snaps instead of pop rivets. Because it is not stated or seen. @ukswrath or @justjoseph63 are the deployment officers. I have reached out to Joseph, but maybe one of them can assist. I am not sure if there is a correct answer, so I am hopeful that one of them will chime in on this one. Wait and hear from one of them, because they approve/deny L2 and L3. Wish I could give you an answer on this. But I am curious about the response, so I will be watching this one closely. 2 Quote
justjoseph63[Staff] Posted June 29, 2018 Report Posted June 29, 2018 The rear belt shot is mainly to check for the inner drop box. but it also shows if the loop that holds the drop box is fastened/glued to the cloth belt or not, which is the major cause of misalignment, a very common problem. If it isn't fastened to the cloth belt with rivets or glued it is something that we (or anyone) can suggest to keep it in place. The rear shot also usually shows a closer shot of the approved fasteners, (rivets, snaps, Chicago screws). The inner box can be held in place with whatever holds it there securely... glue, magnets, chewing gum, (well, maybe not chewing gum). Some Troopers make them where they can be opened/closed to store keys. etc. As long as the inner one is in place all is good at level 3. Hope this helps! 3 Quote
Commander Gree[501st] Posted June 29, 2018 Author Report Posted June 29, 2018 13 minutes ago, justjoseph63 said: The rear belt shot is mainly to check for the inner drop box. but it also shows if the loop that holds the drop box is fastened/glued to the cloth belt or not, which is the major cause of misalignment, a very common problem. If it isn't fastened to the cloth belt with rivets or glued it is something that we (or anyone) can suggest to keep it in place. The rear shot also usually shows a closer shot of the approved fasteners, (rivets, snaps, Chicago screws). The inner box can be held in place with whatever holds it there securely... glue, magnets, chewing gum, (well, maybe not chewing gum). Some Troopers make them where they can be opened/closed to store keys. etc. As long as the inner one is in place all is good at level 3. Hope this helps! Exactly what I was looking for! Thanks!!! Quote
justjoseph63[Staff] Posted June 29, 2018 Report Posted June 29, 2018 7 minutes ago, Commander Gree said: Exactly what I was looking for! Thanks!!! My pleasure, sir! Quote
Pretzel Posted June 30, 2018 Report Posted June 30, 2018 Joseph to the rescue! Thanks brother. Glad to see that answered. Quote
ukswrath[Staff] Posted July 6, 2018 Report Posted July 6, 2018 Rocking and rollin, looking great so far Quote
Commander Gree[501st] Posted July 6, 2018 Author Report Posted July 6, 2018 oh Snap!!! Belt is done. Snap plates are going in. Gonna take a few days for lack of clamps and magnets. but ill get to my goal by this weekend!!! 2 Quote
Commander Gree[501st] Posted July 6, 2018 Author Report Posted July 6, 2018 Blaster with ring installed and painted. Hope this will make L3 2 Quote
justjoseph63[Staff] Posted July 7, 2018 Report Posted July 7, 2018 Looks like you are well on your way, Jordan! Once you get basic approval, I will be looking for that EI submission soon after! 1 Quote
Commander Gree[501st] Posted July 7, 2018 Author Report Posted July 7, 2018 9 hours ago, justjoseph63 said: Looks like you are well on your way, Jordan! Once you get basic approval, I will be looking for that EI submission soon after! Just got my photos. Going to post them here in the Pre-Approval area and see what everyone says. then once i get word i am approved they will be coming the EIB and Centurion shortly after!!! 1 Quote
ukswrath[Staff] Posted July 7, 2018 Report Posted July 7, 2018 21 hours ago, Commander Gree said: Blaster with ring installed and painted. Hope this will make L3 Looks good Quote
Commander Gree[501st] Posted July 9, 2018 Author Report Posted July 9, 2018 APPROVED!!!! TK-21523 Reporting for duty!!! will fix my issues with my armor and submit for EIB and then on to Centurion!!! 4 Quote
ukswrath[Staff] Posted July 9, 2018 Report Posted July 9, 2018 2 hours ago, Commander Gree said: APPROVED!!!! TK-21523 Reporting for duty!!! will fix my issues with my armor and submit for EIB and then on to Centurion!!! Congratulations! 1 Quote
Commander Gree[501st] Posted July 13, 2018 Author Report Posted July 13, 2018 I have been busy trying to get this helmet setup. I think i got it, although i dont like the fan noise, but i will live with it. hoping that once i get Troopertalk going it wont be too bad. and i need to get bluetooth headphones and transmitter for the hearing assist, these speaks are ok, but i had headphones in and man what a difference. but the speakers will do for now. 2 Quote
Commander Gree[501st] Posted July 17, 2018 Author Report Posted July 17, 2018 Just ordered a Bluetooth Mic (wireless). and have now got Trooper Talk installed. Hoping to figure that thing out. seems like if I talk too loud it cuts right out Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.