Hoda[Staff] Posted February 27, 2018 Report Posted February 27, 2018 General Info: Name: Eric Ho FISD Forum Name: TK77520 501st Member Page: https://www.501st.com/members/displaymemberdetails.php?userID=27157 Legion ID: TK-77520 Garrison: Star Garrison Mandatory Information: Armor = Troopermaster Helmet= Troopermaster Blaster= Hyperfirm Optional Information: Height = 5'8" Weight = 190 lbs Canvas belt = Troopermaster Hand Plates = Troopermaster Holster = Troopermaster Neck Seal = Darman Boots = StormtrooperStoreUS (Etsy) Electronics= iComm, VoiceBooster, Ukswrath Hearing Assist, Henry's Helmet Fans, TrooperTalk Armor Photos: Full Body Front Full Body Back Full Right Full Left Right Side Detail Left Side Detail Helmet Photos: Front Side Back Hovi Tip Detail Lens Color Accessory Photos: Ammo Belt Neckseal Blaster Left Side Blaster Right Side Thermal Detonator Back Action Shot Optional Photos: Interior Strapping Abdomen Detail 2 Quote
Sly11[Admin] Posted March 8, 2018 Report Posted March 8, 2018 Hi Eric Apologies for the delay, but while you are waiting can we please ask you to atend to something minor, that doesnt meet the level 2 criteria please. As per the CRL For level two certification (if applicable): Any gap between the abdomen and kidney armor is no more than 1/2" (12.5mm) wide. We can see on one side you have no gap, which is perfect, but on the rivet side the gap looks to be over the 12.5mm allowance. This should be easily fixed as you can have the small gap either side as long as they are within the parameter. Obviously fro Centurion there will need to be no gap either side. Please adjust and post up a new image for the left and right sides. Quote
Hoda[Staff] Posted March 8, 2018 Author Report Posted March 8, 2018 Andrew - thanks for getting back so quickly, no rush at all! I can easily fix that - unfortunately I am on a work trip and won't be home again until next Tuesday. I will upload the new photos then. My apologies for the delay! Quote
Sly11[Admin] Posted March 11, 2018 Report Posted March 11, 2018 On 3/8/2018 at 11:15 PM, TK77520 said: Andrew - thanks for getting back so quickly, no rush at all! I can easily fix that - unfortunately I am on a work trip and won't be home again until next Tuesday. I will upload the new photos then. My apologies for the delay! Excellent, thanks Eric Quote
Hoda[Staff] Posted March 15, 2018 Author Report Posted March 15, 2018 On 3/11/2018 at 5:10 PM, Sly11 said: Excellent, thanks Eric Hi Andrew! Uploading here the new photos for the sides. I made the straps a bit tighter, and made sure it's less than 1/2" ... it's about as tight as I can make it, haha! I have also uploaded here a new full body front photo - noticed the sniper plate was a bit off, so I adjusted. Left Side Detail Right Side Detail Full Body Front Quote
Sly11[Admin] Posted March 15, 2018 Report Posted March 15, 2018 Excellent mate, I have almost finished your review, I have made mention on the sniper plate, so will leave it in as i think you can still rotate that shin outwards a bit more. Back with full review shortly. Quote
Hoda[Staff] Posted March 15, 2018 Author Report Posted March 15, 2018 Excellent mate, I have almost finished your review, I have made mention on the sniper plate, so will leave it in as i think you can still rotate that shin outwards a bit more. Back with full review shortly. Thanks brother! Quote
Sly11[Admin] Posted March 16, 2018 Report Posted March 16, 2018 Hey Eric thank you for your EIB application and your patience. Let's go through your application. CRL and EIB Application Requirements:All the required submission photos have been posted, and your armour meets all the necessary requirements for level 2. With that Tony and myself would like to welcome you to Expert Infantry, congratulations trooper Other-Armor Fit/Assembly:In this section we review observations made by your fellow troopers and ourselves. Some observations may lead to suggestions to improve the overall look of your armor. If any suggestion affects any application, it will be listed separately in the above or below sections. Thank you for attending to the side gap, it looks much better. Only some simple fixes to go through so lets start with the Shoulder Bells. These can still come in closer to the plastic bridges, and as seen in the below screen reference image, they can virtually if not be touching them at the tops. It should only take a shortening of the black elastic straps to achieve this and in turn will also make the front of the Bells sit a touch closer to the side of the chest plate. We can also see a dressing issue with your Sniper shin. Just needs a rotation so the cover strips line up from shin to thigh, and just something to be mindful of when kitting up. Reference image Only one thing to mention on the helmet and that is the lower ear screw looks like it could be tightened up so it sits closer to the surface of the ear It does appear to be jutting out quite a bit Next item is simply an accuracy, or nice to have item. The screws used on the Thermal Det, as seen in the below reference image, were a Pan head flat blade type, where currently you have a dome head variety. Like I said, not a deal breaker just another step closer to screen accurate. Reference Image Centurion Suggestions:In this section we prepare you for Centurion. More photos are requested that allow us to make better decisions on possible adjustment etc. If there are any areas of concern they will be discussed here. I must say, based on what we can see, there is no reason for you not to apply for Centurion. Be mindful when dressing that your front cover strips should line up. Shins to thighs and fore arms to Biceps. Providing nothing shows up in the additional photos required for level 3 it should be plain sailing. Congratulations once again and head on out proud of your achievement. 1 Quote
CableGuy[TK] Posted March 16, 2018 Report Posted March 16, 2018 Well done, Eric. :-)Sent from my iPhone using Tapatalk 1 Quote
Frank75139[501st] Posted March 16, 2018 Report Posted March 16, 2018 Good job!Sent from my iPhone using Tapatalk 1 Quote
Hoda[Staff] Posted March 16, 2018 Author Report Posted March 16, 2018 Hey Eric thank you for your EIB application and your patience. Let's go through your application. CRL and EIB Application Requirements:All the required submission photos have been posted, and your armour meets all the necessary requirements for level 2. With that Tony and myself would like to welcome you to Expert Infantry, congratulations trooper Other-Armor Fit/Assembly:In this section we review observations made by your fellow troopers and ourselves. Some observations may lead to suggestions to improve the overall look of your armor. If any suggestion affects any application, it will be listed separately in the above or below sections. Thank you for attending to the side gap, it looks much better. Only some simple fixes to go through so lets start with the Shoulder Bells. These can still come in closer to the plastic bridges, and as seen in the below screen reference image, they can virtually if not be touching them at the tops. It should only take a shortening of the black elastic straps to achieve this and in turn will also make the front of the Bells sit a touch closer to the side of the chest plate. We can also see a dressing issue with your Sniper shin. Just needs a rotation so the cover strips line up from shin to thigh, and just something to be mindful of when kitting up. Reference image Only one thing to mention on the helmet and that is the lower ear screw looks like it could be tightened up so it sits closer to the surface of the ear It does appear to be jutting out quite a bit Next item is simply an accuracy, or nice to have item. The screws used on the Thermal Det, as seen in the below reference image, were a Pan head flat blade type, where currently you have a dome head variety. Like I said, not a deal breaker just another step closer to screen accurate. Reference Image Centurion Suggestions:In this section we prepare you for Centurion. More photos are requested that allow us to make better decisions on possible adjustment etc. If there are any areas of concern they will be discussed here. I must say, based on what we can see, there is no reason for you not to apply for Centurion.Be mindful when dressing that your front cover strips should line up. Shins to thighs and fore arms to Biceps.Providing nothing shows up in the additional photos required for level 3 it should be plain sailing. Congratulations once again and head on out proud of your achievement. Alright!! Thank you for the detailed notes. I will tighten a few things, and go for Centurion! Really appreciate it. Quote
Hoda[Staff] Posted March 16, 2018 Author Report Posted March 16, 2018 Thanks everyone! Appreciate it Quote
Shanester[TK] Posted March 16, 2018 Report Posted March 16, 2018 Congrats trooper and welcome to Expert Infantry! 1 Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.