adailyptc[TK] Posted February 2, 2018 Report Posted February 2, 2018 Name: Aaron Daily FISD forum name: adailyptc FISD member page: https://www.501st.com/members/displaymemberdetails.php?userID=26894 501st TK ID: TK41871 Garrison: Georgia Mandatory Information Armor Maker: WTF (Walt's Trooper Factory) Helmet Maker: WTF Blaster Type: Doopeydoo's Optional Information Height: 6'-0" Weight: 195 Boot Maker: TK Boots Canvas belt: Trooperbay Hand Plates Type: White rubber by Trooperbay Electronics: Helmet fans by Henry's Helmet Fans, Audio by Trooper Talk Neck Seal Type: Trooperbay Holster Maker: Trooperbay Photos Front - Arms at side Back - Arms at side Left - Arms raised Right - Arms raised Right Side Detail Left Side Detail (velcro is concealed behind belt to help support gun weight) Abdomen Details Cod and Butt Plate Attachment Interior Strapping Helmet Front Detail Helmet Left Side Detail Helmet Right Side Detail Helmet Back Detail Hovi Tip Detail Lens Color Blaster Left Blaster Right Blaster D-Ring Neck Seal Thermal Detonator - Back Holster Attachment Quote
CableGuy[TK] Posted February 2, 2018 Report Posted February 2, 2018 (edited) Hi Aaron. Lovely job job on your armour and blaster! You wear it well. :-) To my eye, all I’d possibly consider is moving your forearms up a tad to even the elbow and wrist gaps. If you wanted to add a little more to the stunt look, you could probably get away with extending the frown paint a little, too. (Personal preference though ) Best of luck with your application. :-) Dan Edited February 2, 2018 by CableGuy 1 Quote
Gwithian Posted February 2, 2018 Report Posted February 2, 2018 Your armour looks great, I too have used Velcro to help support my belt. Good luck with your application Stephen Sent from my iPhone using Tapatalk 1 Quote
Poseidon[501st] Posted February 2, 2018 Report Posted February 2, 2018 Looking sharp. One thing I noticed was your TD clips. Looks like you have significant gaps. For level two certification (if applicable): Thermal detonator belt clips are positioned with little to no gap between the clips and the end caps. 1 Quote
adailyptc[TK] Posted February 2, 2018 Author Report Posted February 2, 2018 13 hours ago, CableGuy said: Hi Aaron. Lovely job job on your armour and blaster! You wear it well. :-) To my eye, all I’d possibly consider is moving your forearms up a tad to even the elbow and wrist gaps. If you wanted to add a little more to the stunt look, you could probably get away with extending the frown paint a little, too. (Personal preference though ) Best of luck with your application. :-) Dan Good eye on the forearms. Now that I've gone back and really studied screen grabs, you're absolutely right.....easy fix to shorten the strap between the biceps and forearms. THANKS! 1 Quote
adailyptc[TK] Posted February 2, 2018 Author Report Posted February 2, 2018 40 minutes ago, Poseidon said: Looking sharp. One thing I noticed was your TD clips. Looks like you have significant gaps. For level two certification (if applicable): Thermal detonator belt clips are positioned with little to no gap between the clips and the end caps. Yea, I was basing my TD clips on some old photos of original suits which, to my eye, kind of had them all over the place (they were also crooked, which my personality just won't let me do ). With that said, there are definitely more of them that are touching the end caps than not....and the CRL says to do it that way. Easy fix in process. THANKS Quote
Poseidon[501st] Posted February 2, 2018 Report Posted February 2, 2018 Just looking out for you brother. I have seen back and forths over the content of the CRLs before, and I just keep my head down and follow whats written down because that's the path of least resistance. Quote
adailyptc[TK] Posted February 3, 2018 Author Report Posted February 3, 2018 Fixed. Thanks again for the help. 2 Quote
adailyptc[TK] Posted February 5, 2018 Author Report Posted February 5, 2018 On 2/2/2018 at 3:11 PM, adailyptc said: Good eye on the forearms. Now that I've gone back and really studied screen grabs, you're absolutely right.....easy fix to shorten the strap between the biceps and forearms. THANKS! Shortened the straps between the biceps and forearms by about 5/8". It definitely looks better. If I need to take up more, i'll probably do it by decreasing the gap between the shoulder bells and shoulder straps. thanks for the keen eyes! 1 Quote
illusionz_09[TK] Posted February 5, 2018 Report Posted February 5, 2018 Looking good trooper. You are missing a picture of the rivets of the ammo pack on your right knee. and you need to show the sniper plate placement. some small feedback though (won't affect approval), i would position your shins a little lower to your boot. Just an eye test, the shin guard looks better when its closer to your ankles. Also the elastic holding down the shoulder straps should be significantly thinner. I believe they should be 1/8". It will make it look cleaner too. Good Luck on your approval! 1 Quote
Shanester[TK] Posted February 5, 2018 Report Posted February 5, 2018 Very nice work trooper. Good luck! Quote
adailyptc[TK] Posted February 5, 2018 Author Report Posted February 5, 2018 7 hours ago, illusionz_09 said: Looking good trooper. You are missing a picture of the rivets of the ammo pack on your right knee. and you need to show the sniper plate placement. some small feedback though (won't affect approval), i would position your shins a little lower to your boot. Just an eye test, the shin guard looks better when its closer to your ankles. Also the elastic holding down the shoulder straps should be significantly thinner. I believe they should be 1/8". It will make it look cleaner too. Good Luck on your approval! Yea, a different family member helps me suit up each time so the shin position tends to vary a bit. I agree with your opinion on placement, though. The shoulder strap will be an easy fix this weekend when I have a little free time. In reviewing the photo checklist, it appears that the photos you mention are on the Centurion list, not the EIB list. I have them, though, and will be happy to include them here if they're required. Thanks for your help in making my costume the best it can be! 2 Quote
Harbinger[IPM] Posted February 5, 2018 Report Posted February 5, 2018 FWIW, I used snaps where possible so the position of "stuff" doesn't change as compared to velcro. I do use velcro for my thigh garter straps, but (protip) I used a silver sharpie to add a reference line so they are same every time. 1 Quote
adailyptc[TK] Posted February 6, 2018 Author Report Posted February 6, 2018 14 hours ago, Harbinger said: FWIW, I used snaps where possible so the position of "stuff" doesn't change as compared to velcro. I do use velcro for my thigh garter straps, but (protip) I used a silver sharpie to add a reference line so they are same every time. I use snaps everywhere as well. I do have a small piece of velcro at the top of my boots on the front to hold the shins in place, and keep them from twisting. The silver sharpie is a great idea, though, to be sure I get them stuck in the correct location to start with. Thanks. Quote
shashachu[TK] Posted February 7, 2018 Report Posted February 7, 2018 Nice work! Great to see more WTF kits reaching EIB and Centurion. Speaking of Centurion, I'm not 100% sure it's specified in the CRL, but the white elastic holding down your shoulder straps looks big - I believe 1/8" is screen-accurate. Don't know if it will matter for Centurion or not. Quote
adailyptc[TK] Posted February 7, 2018 Author Report Posted February 7, 2018 The Centurion CRL requires photos of that area (im assuming to check the straps), but doesn't mention the width of those straps. My current straps were a bit of guessing on my part. You are the second person to mention the 1/8" width, so I will be fixing that this weekend. Thanks for your help. Quote
ukswrath[Staff] Posted February 12, 2018 Report Posted February 12, 2018 Hey Aaron Andrew or myself will be with you shortly. While you're waiting could you post an action shot please. Thank you Quote
adailyptc[TK] Posted February 13, 2018 Author Report Posted February 13, 2018 3 hours ago, ukswrath said: Hey Aaron Andrew or myself will be with you shortly. While you're waiting could you post an action shot please. Thank you Here is my action shot. Thought I had included it in my original post, but must have forgotten. Looking forward to your recommendations. thanks. 1 Quote
adailyptc[TK] Posted February 13, 2018 Author Report Posted February 13, 2018 Not sure if it's required for this submission, but I went ahead and reduced the size of my shoulder elastic based on several recommendations in this thread. 1 Quote
ukswrath[Staff] Posted February 13, 2018 Report Posted February 13, 2018 1 hour ago, adailyptc said: Here is my action shot. Thought I had included it in my original post, but must have forgotten. Looking forward to your recommendations. thanks. Thank you Quote
ukswrath[Staff] Posted February 19, 2018 Report Posted February 19, 2018 Hey Aaron please post the following at the top of the page please. Name: FISD forum name: 501st Member Page: 501st ID: Quote
ukswrath[Staff] Posted February 19, 2018 Report Posted February 19, 2018 Alright let's get started, thank you for your EIB application Aaron. CRL and EIB Application Requirements:All the required submission photos have been posted. Beautiful job on your build . With that Andrew and I have confirmed your armor displays all necessary elements as set out in the Expert Infantry CRL. Welcome to EI and congratulations. Other-Armor Fit/Assembly:In this section we review observations made by your fellow troopers and ourselves. Some observations may lead to suggestions to improve the overall look of your armor. If any suggestion affects any application, it will be listed separately in the above or below sections. You have a few areas we'd like to go ever with you. Most are to enhance the overall look of your armor however, the accuracy of the armor is ultimately up to you. Shoulders should have minimal gap between them and the chest and back plates. Though you have very little gap in the front you have a relatively large gap in the rear. After careful review it appears you've done all you can do to bring these in closer. In our opinion either the bells were trimmed too much or are just to small for you. Though this wont effect you at the higher levels it is suggested maybe you look into replacing the bells. Here's a couple reference photos Next up the bicep to forearm gap. Though not bad your forearms could stand to be be adjusted a 1/2" or so closer to your biceps. Reference photo And lastly the posterior should sit directly below the kidney plate. Tuck that bad boy away and you're good. Reference photo Centurion Suggestions:In this section we prepare you the best we can for Centurion. If there are any areas of concern they will be discussed here. At this time we see nothing from holding you back for a clean Centurion application if you so choose to apply. Excellent job Aaron, hope to see you at Centurion Quote
Shanester[TK] Posted February 19, 2018 Report Posted February 19, 2018 Congrats and welcome to EIB trooper!! Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.