Gwithian Posted November 26, 2017 Report Posted November 26, 2017 Name: Stephen EdwardsID: 14655FISD name: GwithianGarrison: UKGArmour: RS Propmasters Lid: RS Propmasters Blaster: RS Propmasters Height: 5’5”Weight: 146lbsBoots: TK BootsBelt: RS Propmasters Neck seal: RS Propmasters Holster: RS Propmasters Hand guards: RS Propmasters Gloves: J Sainsbury’s (black rubber)Build thread:https://www.whitearmor.net/forum/topic/40087-stephens-rs-anh-stunt-build-wip-for-small-people/ Pictures Front Back Re-posted the bank pic as it wasn’t working Left arm raised Right arm raised Right detail Left detail Ab close up Action Cod /butt attachment Interior strapping Lid front Lid side Lid back Hovi tip Lenses Blaster Neck seal TD Belt Drop boxes Holster fasten Gloves Boots Thank you for considering my application Sent from my iPhone using Tapatalk Quote
CableGuy[TK] Posted November 26, 2017 Report Posted November 26, 2017 Looking good. Best of luck. :-)Sent from my iPhone using Tapatalk 1 Quote
Gwithian Posted November 26, 2017 Author Report Posted November 26, 2017 Dan, thanks mate It’s all down to you mate, I was thinking about it, saw your post and thought why not I think we are both doing clearance and hopefully EIB together. Good luck also mate Sent from my iPhone using Tapatalk 1 Quote
CableGuy[TK] Posted November 26, 2017 Report Posted November 26, 2017 Dan, thanks mate It’s all down to you mate, I was thinking about it, saw your post and thought why not I think we are both doing clearance and hopefully EIB together. Good luck also mate Sent from my iPhone using Tapatalk Brilliant! Fingers crossed for both of us then. ;-)You never know - we might end up at the same induction event. Dan Sent from my iPhone using Tapatalk 1 Quote
Gwithian Posted November 26, 2017 Author Report Posted November 26, 2017 Brilliant! Fingers crossed for both of us then. ;-)You never know - we might end up at the same induction event. Dan Sent from my iPhone using Tapatalk Now that would be great Sent from my iPhone using Tapatalk 1 Quote
Sly11[Admin] Posted November 30, 2017 Report Posted November 30, 2017 Hi Stephen, thanks for your application, we are slowly catching up so will be with you as soon as possible. 1 Quote
TheSwede[TK] Posted November 30, 2017 Report Posted November 30, 2017 I checked in on your build from time to time so I know you did tremendous amount of work making the armor fit you and for that I salut you I have a few suggestions: Ab button plates seem to be a tad big Drop boxes (Centurion in mind) are aligned to end of the ammo belt at some pics and not at others, some glue needed perhaps? Could also be my eyes diceiving and if so please take no notice of me I think your first pic is Epic...you scroll down and...a stormtrooper emerges - says it all 1 Quote
Cricket[TK] Posted November 30, 2017 Report Posted November 30, 2017 Looks great! Only thing I have to add (and this isn't an EIB or Centurion requirement), is you may want to take a lighter or heat sealing iron to melt the ends of your elastics on your brackets. When you heat them up, it'll prevent fraying (and premature replacement). Takes just a few seconds and leaves a clean edge. Good luck, trooper! 1 Quote
Gwithian Posted November 30, 2017 Author Report Posted November 30, 2017 I checked in on your build from time to time so I know you did tremendous amount of work making the armor fit you and for that I salut you I have a few suggestions: Ab button plates seem to be a tad big Drop boxes (Centurion in mind) are aligned to end of the ammo belt at some pics and not at others, some glue needed perhaps? Could also be my eyes diceiving and if so please take no notice of me:smiley-sw013: I think your first pic is Epic...you scroll down and...a stormtrooper emerges - says it all Thanks for your kind words and looking in on my build thread, I agree re the drop boxes.... I need to glue them.... keep forgetting..... it’s my age .... lolThe the ab buttons, just looked at them and yeah .... they seem a tad big, the thing is I replaced the previous ones because they were too small ..... perhaps it will be third time lucky Sent from my iPhone using Tapatalk 1 Quote
Gwithian Posted November 30, 2017 Author Report Posted November 30, 2017 Looks great! Only thing I have to add (and this isn't an EIB or Centurion requirement), is you may want to take a lighter or heat sealing iron to melt the ends of your elastics on your brackets. When you heat them up, it'll prevent fraying (and premature replacement). Takes just a few seconds and leaves a clean edge. Good luck, trooper! Hi Christine, thanks for your advice, I actually spent this afternoon seeing them all by hand to stop them from fraying.... I was doing that when you posted in my build thread earlier..... so my elastic is no longer fraying .... oh if I were to take a lighter to them I’d likely burn a hole in the armour .... I’m bad enough with s heat gun .... lol Didn’t realise the heat sealing iron would do it.... will have a try on some spare elastic and then .... well might as well do that as well Sent from my iPhone using Tapatalk Quote
Gwithian Posted November 30, 2017 Author Report Posted November 30, 2017 Hi Stephen, thanks for your application, we are slowly catching up so will be with you as soon as possible. Thanks for your consideration Sir, I know you are all very busy people and I appreciate you taking the time to review my application. Sent from my iPhone using Tapatalk Quote
ukswrath[Staff] Posted December 1, 2017 Report Posted December 1, 2017 One last request before we get started. Could you please post a photo of the inside thigh ammo belt connection please. Thank you 1 Quote
illusionz_09[TK] Posted December 1, 2017 Report Posted December 1, 2017 Looking good. Should be an easy approval. Good Luck! 1 Quote
Gwithian Posted December 1, 2017 Author Report Posted December 1, 2017 One last request before we get started. Could you please post a photo of the inside thigh ammo belt connection please. Thank you I will do that tomorrow Sent from my iPhone using Tapatalk Quote
Daetrin[Admin] Posted December 2, 2017 Report Posted December 2, 2017 That's a pretty set of armor there - looks great. 2 Quote
Gwithian Posted December 2, 2017 Author Report Posted December 2, 2017 One last request before we get started. Could you please post a photo of the inside thigh ammo belt connection please. Thank you Hi Tony , Pictures as requestedOutside ... just in case you need themInsideI used the same rivets as used on the belt and holster If you need any more pictures let me know Sent from my iPhone using Tapatalk Quote
Coil[TK] Posted December 2, 2017 Report Posted December 2, 2017 Since I am working on upgrading my ANH as well, can I butt i and ask a question. I get that the CRL says to use a solid head rivet for the ammo pack. Does it matter how it looks on the inside since you are asking for the pic? Quote
ukswrath[Staff] Posted December 2, 2017 Report Posted December 2, 2017 2 hours ago, Coil said: Since I am working on upgrading my ANH as well, can I butt i and ask a question. I get that the CRL says to use a solid head rivet for the ammo pack. Does it matter how it looks on the inside since you are asking for the pic? No it doesn't matter what it looks like on the inside. We're just confirming the correct rivets are being used. Cap (either type) or split head rivets are acceptable. 2 Quote
ukswrath[Staff] Posted December 4, 2017 Report Posted December 4, 2017 Hey Stephen thank you for your EIB application. CRL and EIB Application Requirements: All submission photos have been posted. Beautiful looking RS armor you have there . Looks like are required submission photos are present, Andrew and I are very please to say your armor displays all the necessary elements to qualify for Expert Infantry. Congratulations Trooper! Other-Armor Fit/Assembly: In this section we review observations made by your fellow troopers and ourselves. Some observations may lead to suggestions to improve the overall look of your armor. We have nothing to add here except for please remove the pipe ID info lol. Reference photo Centurion Suggestions: Because Centurion photos show much more detail than EIB, items pertaining to Centurion might be seen there and not here. We try to point out all we can from what is seen but the final accuracy is the responsibility of the trooper. At this time We have nothing to add. Congrats again and hope to see you at Centurion. 1 Quote
CableGuy[TK] Posted December 4, 2017 Report Posted December 4, 2017 Great job mate!!! Sent from my iPhone using Tapatalk 1 Quote
CableGuy[TK] Posted December 4, 2017 Report Posted December 4, 2017 Great job mate!!! And just an easy fix for Centurion! :-) Sent from my iPhone using Tapatalk 1 Quote
Cricket[TK] Posted December 4, 2017 Report Posted December 4, 2017 Woo-hoo! You'll be at Centurion in no time at all. Congrats! 1 Quote
Gwithian Posted December 4, 2017 Author Report Posted December 4, 2017 Wow, thank you Tony and Andrew , that’s amazing. I am glad you, the experts, like my armour. I will remove the lettering on the TD and apply for Centurion. I really could not of achieved this without the help, support, advice and encouragement from both the UKG and FISD, I can never thank, all the people who have helped me, enough... you are all truly amazing people.... Troopers helping troopers really sums this up Thank you Stephen Sent from my iPhone using Tapatalk 1 Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.