ANH Stunt build

[gmrhodes13[Staff]]

Looks like you are on top of things, I rough up the area with sandpaper and glue strips of ABS behind the crack, sometimes using a heat gun to make sure the strip confirms properly.

 

I have seen others use fibreglass and resin but be careful as it can heat up when curing. 

[magni[TK]]

I like the old white T-shirt cut in strips and ca glue to stiffen everything up. 

With this it holds but has a little give so a new crack doesn't start above or below old one. 

If you use this method don't go crazy with CA all at once. Do it in small increments to stop heat build up and possible warping.