ImperialMarine778 Posted July 5, 2019 Report Posted July 5, 2019 (edited) 12 minutes ago, Reno_Geek said: It is their modus operandi. lol yet their spam sales they keep sending with the stupid emoji’s are working just fine Edited July 5, 2019 by ImperialMarine778 Quote
Lee_C_77[TK] Posted July 5, 2019 Report Posted July 5, 2019 They responded to me. Saying people are clogging up the ticket system by sending multiple emails. Always the customers fault. They also responded closing all my tickets without actually answering any questions. The only way to get an answer is to put bullet points and ask direct questions. 1 Quote
mikidymac[TK] Posted July 7, 2019 Report Posted July 7, 2019 Maybe customers wouldn’t keep emailing if the just shipped some DAMN products!!! 3 Quote
gmrhodes13[Staff] Posted July 11, 2019 Report Posted July 11, 2019 (edited) I know I shouldn't but had to laugh at this PRICELESS ---------- Edited September 2, 2022 by gmrhodes13 link removed no longer working 5 Quote
ImperialMarine778 Posted July 11, 2019 Report Posted July 11, 2019 (edited) 2 hours ago, gmrhodes13 said: I know I shouldn't but had to laugh at this PRICELESS HAHAHAHAHA. Nice photoshopping. Now all it needs is to be placed in one of anovos’ spam emails with 10 different emoji’s in the subject text. I know the design is real according to the upcoming 3rd part of the mouse’s line of *alleged* “star wars” movies, but honestly the design looks like something that was from deviantart and other similar imagehosting sites with fanart and disgusting blogs (you know what they are). I look forward to more Classic TK’s joining our ranks in the future. #GalacticEmpire4Life Edited July 11, 2019 by ImperialMarine778 1 Quote
Peregrinus Posted July 11, 2019 Report Posted July 11, 2019 11 hours ago, ImperialMarine778 said: I know the design is real according to the upcoming 3rd part of the mouse’s line of *alleged* “star wars” movies, but honestly the design looks like something that was from deviantart and other similar imagehosting sites with fanart and disgusting blogs (you know what they are). No comment on that they're called Sith Troopers? 1 Quote
ImperialMarine778 Posted July 12, 2019 Report Posted July 12, 2019 (edited) 15 hours ago, Peregrinus said: No comment on that they're called Sith Troopers? LOL they can call it whatever they want at this point, but that red paint will fade hard hahaha. Plus it will still be virtually impossible to fully clean out all of that gunk that will get stuck between the molded lines that are decorated around that armor even after light trooping in it. Maybe someone can make hard wavy sponges with ridges molded specifically to fit between those decorative line molds and sell them to us (We’re all looking at you Tony :), just send us a complimentary water bottle for the soap, water is scarce for us cali’s). Don’t know if clay bar would help..... Calling it a First Order Magma Trooper would have been much better. Also, a gravely missed opportunity for making some sort of First Order Death Trooper or Biker Scout instead if you ask me..... Edited July 12, 2019 by ImperialMarine778 Quote
JAFO[TK] Posted July 12, 2019 Report Posted July 12, 2019 [Maybe someone can make hard wavy sponges with ridges molded specifically to fit between those decorative line molds and sell them to us (We’re all looking at you Tony , just send us a complimentary water bottle for the soap, water is scarce for us cali’s). Don’t know if clay bar would help.....Just use a head lice comb Sent from my iPhone using Tapatalk Pro 1 Quote
ImperialMarine778 Posted July 12, 2019 Report Posted July 12, 2019 (edited) 22 minutes ago, JAFO said: [Maybe someone can make hard wavy sponges with ridges molded specifically to fit between those decorative line molds and sell them to us (We’re all looking at you Tony , just send us a complimentary water bottle for the soap, water is scarce for us cali’s). Don’t know if clay bar would help..... Just use a head lice comb Sent from my iPhone using Tapatalk Pro Haha ya. That ABS with the back side of the armor for the lines filled better be sturdy enough to endure a good cleaning over and over. And expect much more frequent repainting. I mean, the photoshopper has proposed at least 16 years for Anovos to address those types of issues if they actually go through with it, and I quote “if we’re lucky” LOL ....And speaking of painting, I always found it silly that Anovos couldn’t just mold everything in black to make it easier for us to paint. It would have saved them much more time and resources..... Edited July 12, 2019 by ImperialMarine778 Quote
gmrhodes13[Staff] Posted July 12, 2019 Report Posted July 12, 2019 (edited) ---------- Edited September 2, 2022 by gmrhodes13 link removed no longer working 1 Quote
heartstopper85[TK] Posted July 12, 2019 Report Posted July 12, 2019 sith trooper is gonna look horrible on an abs pull, hoping Jim takes this on he gets some detail in fiberglass. 3d printing is way to go but seems like its gonna be a prep nightmare 2 Quote
Lee_C_77[TK] Posted July 12, 2019 Report Posted July 12, 2019 Received my FOTK armour and red pauldron shipping notice yesterday. No helmet or gaskets yet but it’s a start. Hopefully others will follow. 4 Quote
heartstopper85[TK] Posted July 12, 2019 Report Posted July 12, 2019 good news hoping more start getting what they ordered 1 Quote
JAFO[TK] Posted July 12, 2019 Report Posted July 12, 2019 Received my FOTK armour and red pauldron shipping notice yesterday. No helmet or gaskets yet but it’s a start. Hopefully others will follow. Great news Lee! Here’s hoping the Pauldron is red - we haven’t seen one in the wild yet and one person who ordered red got black. Welcome to the Anosho lottery!Sent from my iPhone using Tapatalk Pro 1 Quote
gmrhodes13[Staff] Posted July 12, 2019 Report Posted July 12, 2019 Looking forward to seeing those BBB images. 1 Quote
JAFO[TK] Posted July 13, 2019 Report Posted July 13, 2019 We’ve now seen the first white Pauldron arrive in the wild! Sent from my iPhone using Tapatalk Pro 1 Quote
JTninja[TK] Posted July 13, 2019 Report Posted July 13, 2019 An Andre from another facebook group also received their kit w/ white pauldron, so it sounds like small waves go out. Perhaps when they get a large shipment, 3/4 goes to Disneyland, with 1/4 going to preorder fulfillment? Quote
ukswrath[Staff] Posted July 13, 2019 Report Posted July 13, 2019 1 hour ago, JTninja said: An Andre from another facebook group also received their kit w/ white pauldron, so it sounds like small waves go out. Perhaps when they get a large shipment, 3/4 goes to Disneyland, with 1/4 going to preorder fulfillment? Glad to hear more kits are on the way. Looking forward to your build Quote
Harbinger[IPM] Posted July 13, 2019 Report Posted July 13, 2019 Movement is good. Hope I'll see mine this year... getting it done by IX premiere isn't likely but still, one can dream. 2 Quote
Hutt-trooper[TK] Posted July 14, 2019 Report Posted July 14, 2019 So I’m trying to use the time spent waiting for this armour semi-productively (instead of spending it making voodoo dolls of Anovos executives..). I’m trying to work out what the specific differences in the TFA vs TLJ armour are (not the helmets as that’s clear). I’ve poured through all the other forum posts and old CRL building discussions - but I can’t seem to find a definitive list of differences. What’s driving this is the comments about the armour seeming to be TLJ and I’m wondering just what will need to be changed to make this TFA approveable. I know that the cod is different (thinner) but there isn’t a clear explanation about which level of approval this difference is required for. I also know that the end cap on the TD is a different colour - but there were some old forum discussions about the size/length of the end cap maybe being different and I can’t see any description of where this ended up. There was also some old discussion about the spats maybe being different? I’m sure I’m not the only person wanting to make the TFA version of this armour - from what seems to be a TLJ version that is occasionally shipping. Can anybody help clear this up for us all (or if I’ve missed an exisiting thread about this, point me in that direction)? thanks Quote
ukswrath[Staff] Posted July 14, 2019 Report Posted July 14, 2019 10 minutes ago, Hutt-trooper said: So I’m trying to use the time spent waiting for this armour semi-productively (instead of spending it making voodoo dolls of Anovos executives..). I’m trying to work out what the specific differences in the TFA vs TLJ armour are (not the helmets as that’s clear). I’ve poured through all the other forum posts and old CRL building discussions - but I can’t seem to find a definitive list of differences. What’s driving this is the comments about the armour seeming to be TLJ and I’m wondering just what will need to be changed to make this TFA approveable. I know that the cod is different (thinner) but there isn’t a clear explanation about which level of approval this difference is required for. I also know that the end cap on the TD is a different colour - but there were some old forum discussions about the size/length of the end cap maybe being different and I can’t see any description of where this ended up. There was also some old discussion about the spats maybe being different? I’m sure I’m not the only person wanting to make the TFA version of this armour - from what seems to be a TLJ version that is occasionally shipping. Can anybody help clear this up for us all (or if I’ve missed an exisiting thread about this, point me in that direction)? thanks You've pretty much narrowed it down. The only other area I've seen that is different is the forearm construction near the elbow. Once you have your armor and begin your build it won't take much to alter and should cost very little. Lastly, take a look at the TFA CRL details and keep an eye on the TLJ CRL as I'm sure it will update in the near future. 1 Quote
gmrhodes13[Staff] Posted July 14, 2019 Report Posted July 14, 2019 The CRL's for both TFA and TLJ will be undergoing a review soon, there are specific differences between the armor and no doubt many of these will be bought up in the proposed updates as a lot more references are available since the CRL's had first been made. Cod is definitely different and required for TLJ L2 EIB as most makers use the TFA design, the images below show the differences of those. Forearms are also different (without digging for better images, the below show the difference) TFA TLJ TJL Anovos You may find this spreadsheet useful https://drive.google.com/file/d/1GBkXIfRs9lYW6vnhVjqdEv5oNdp2ToTs/view Quote
JAFO[TK] Posted July 14, 2019 Report Posted July 14, 2019 The CRL's for both TFA and TLJ will be undergoing a review soon, there are specific differences between the armor and no doubt many of these will be bought up in the proposed updates as a lot more references are available since the CRL's had first been made. Cod is definitely different and required for TLJ L2 EIB as most makers use the TFA design, the images below show the differences of those. Forearms are also different (without digging for better images, the below show the difference) TFA TJL You may find this spreadsheet useful https://drive.google.com/file/d/1GBkXIfRs9lYW6vnhVjqdEv5oNdp2ToTs/view To be honest the cod may become a moot point once the CRL is reviewed. There are three versions of the cod seen in TLJ, including the TFA.Sent from my iPhone using Tapatalk Pro Quote
ukswrath[Staff] Posted July 14, 2019 Report Posted July 14, 2019 I think showing the TLJ with split side Ab seams and over lap shoulders is a bit confusing. This won't be allowed 1 Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.