Twnbrother Posted November 18, 2017 Author Report Posted November 18, 2017 This morning I started installing the sound cards in the Blue Snaggletooth Hengstler. Perfect fit. All I gotta do now is trim wires for the connection to the power source. I hot glued the number cylinder and the sound boards so they stay put 3 Quote
Twnbrother Posted November 18, 2017 Author Report Posted November 18, 2017 Setting the placement on the scope rail. 3 Quote
Twnbrother Posted November 18, 2017 Author Report Posted November 18, 2017 Trial assembly and placement for electronics. 2 Quote
pwhitrow Posted November 20, 2017 Report Posted November 20, 2017 Nope,not a hijacking. Your Tramp is simply amazing. I will be buying your blast fx and scope reticle to put in Chris’s (Fieldmarshall) kit when it is in production. I had the pleasure of visiting Chris at his shop in South Carolina. Super nice dude. The work you did with Brian (bullhdogProps) on fitting the scope OLED in the hollow resin M38. Wow!!!! I was following the progress. I am glad to support you and your products. Thanks for the kind words bro, it's always nice to be appreciated 1 Quote
pwhitrow Posted November 20, 2017 Report Posted November 20, 2017 Nope,not a hijacking. Your Tramp is simply amazing. I will be buying your blast fx and scope reticle to put in Chris’s (Fieldmarshall) kit when it is in production. I had the pleasure of visiting Chris at his shop in South Carolina. Super nice dude. The work you did with Brian (bullhdogProps) on fitting the scope OLED in the hollow resin M38. Wow!!!! I was following the progress. I am glad to support you and your products. Thanks for the kind words bro, it's always nice to be appreciated Quote
tennantlim[501st] Posted November 22, 2017 Report Posted November 22, 2017 I am in awe of your electronics work. Looking forward to the completion of your build. Quote
Twnbrother Posted November 22, 2017 Author Report Posted November 22, 2017 4 hours ago, tennantlim said: I am in awe of your electronics work. Looking forward to the completion of your build. Thanks. I am trying to do this as simply as possible. I think my total cost of electronics is under ten bucks. But 60 hours of “fun” trying to figure it out. In the end I want the bolt to be able to be pulled back. 1 Quote
Dracotrooper Posted November 22, 2017 Report Posted November 22, 2017 1 hour ago, Twnbrother said: ... In the end I want the bolt to be able to be pulled back. Will be interesting to see this part of the mod Mike. When I add electronics (BlastFX) on my doopydoos build, I will see how to keep the pulling of the charge handle functional. Will you be doing this as well, or even better, have the exposed bolt pull back along with the charge handle? 1 Quote
Twnbrother Posted November 22, 2017 Author Report Posted November 22, 2017 Jesse if all goes as planned I will be able to pull back the bolt to observe the chamber. Hopefully....... 2 Quote
tennantlim[501st] Posted November 23, 2017 Report Posted November 23, 2017 4 hours ago, Twnbrother said: Jesse if all goes as planned I will be able to pull back the bolt to observe the chamber. Hopefully....... This is going to be interesting... Carry on trooper! 2 Quote
Bulldog44[TK] Posted November 27, 2017 Report Posted November 27, 2017 OMG Mike! The sound system you put together for that price is crazy cool. Wow. I am impressed. I bought some sound cards a long while back but got frustred trying to figure out how to have the lights trigger with the sound. You have proved it can be done with some homework and not spending a ton of cash. I might have another go at this. Thanks for sharing the videos too! Quote
Twnbrother Posted November 29, 2017 Author Report Posted November 29, 2017 On 11/27/2017 at 1:13 AM, Bulldog44 said: OMG Mike! The sound system you put together for that price is crazy cool. Wow. I am impressed. I bought some sound cards a long while back but got frustred trying to figure out how to have the lights trigger with the sound. You have proved it can be done with some homework and not spending a ton of cash. I might have another go at this. Thanks for sharing the videos too! Thanks Brian. It’s been a lot of fun trying to figure out a cheap easy way to do this. I have went through many different parts and pieces trying to get the combination right. One thing I can’t figure out is why the stun is turning purple. I might have some wire crossed. It doesn’t happen with the fire. I kinda like the look. Quote
Twnbrother Posted January 3, 2018 Author Report Posted January 3, 2018 (edited) I didn’t a rough cut to hide the wires in the scope rail. If all goes well I will be assembling and painting this weekend. Edited January 3, 2018 by Twnbrother 2 Quote
Twnbrother Posted January 3, 2018 Author Report Posted January 3, 2018 On the the barrel I placed clear disc (ordered on esty) to reflect the lights. Hopefully making a propagation effect. 1 Quote
Twnbrother Posted January 3, 2018 Author Report Posted January 3, 2018 All parts ready for paint and assembly. Yeah!!!!!!! 3 Quote
T-Jay[TK] Posted January 3, 2018 Report Posted January 3, 2018 Keeping fingers crossed for your planned progress next weekend. Guessing we can expect another nice update in a few days?! 1 Quote
Twnbrother Posted January 3, 2018 Author Report Posted January 3, 2018 25 minutes ago, T-Jay said: Keeping fingers crossed for your planned progress next weekend. Guessing we can expect another nice update in a few days?! Tino if all goes well it will be finished by Sunday. 1 Quote
Twnbrother Posted January 4, 2018 Author Report Posted January 4, 2018 Some assembly required. Lol. Paint and assemble WIP 4 Quote
Twnbrother Posted January 5, 2018 Author Report Posted January 5, 2018 (edited) The opening bolt works like a charm No interference with the electronics. Edited January 5, 2018 by Twnbrother 5 Quote
T-Jay[TK] Posted January 5, 2018 Report Posted January 5, 2018 4 minutes ago, Twnbrother said: The opening bolt works like a charm No interference with the electronics. THAT was indeed the problem on my build. Very happy to hear it worked for you and looking forward to your next update. By the way, I love the paint chips on the bottom of your folding stock. Looking so real. 5 Quote
Twnbrother Posted January 5, 2018 Author Report Posted January 5, 2018 Just now, T-Jay said: THAT was indeed the problem on my build. Very happy to hear it worked for you and looking forward to your next update. By the way, I love the paint chips on the bottom of your folding stock. Looking so real. Thanks for the complement. I used your technique. On the base coat I used several different shades of silver/gray/rust/black... leaving just specks of paint. Then when I removed the latex I just dabbed black wash in the spot. 3 Quote
Twnbrother Posted January 7, 2018 Author Report Posted January 7, 2018 (edited) Mission complete. Just a few minor paint fixes. Sliding bolt with electronics is too cool. Lots of fun building. Edited January 7, 2018 by Twnbrother 3 Quote
CableGuy[TK] Posted January 7, 2018 Report Posted January 7, 2018 Yowza - that looks lovely. Do we get an ‘in-action’ demo video soon? ;-)Excellent work. :-)Sent from my iPhone using Tapatalk 1 Quote
T-Jay[TK] Posted January 7, 2018 Report Posted January 7, 2018 Hey Mike, you kept your promise to complete the build by Sunday Congratulations on this achievement! Your blaster not only looks excellent, you also managed to combine the movable bolt with the electronics! Hats off to your work, man. I really hope you will have a lot of fun with this outstanding blaster. Like Dan already said, a little video clip would be the cherry on the cake. 2 Quote
T-Jay[TK] Posted January 7, 2018 Report Posted January 7, 2018 (edited) Sorry, double-post - although just clicking once Edited January 7, 2018 by T-Jay Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.