Jesse12345 Posted July 24, 2017 Report Posted July 24, 2017 So I was working on my anovos and I accidentally glued on the wrong coverstrip on the biceps... where do I get replacement coverstrips? Quote
IcyTrooper[TK] Posted July 24, 2017 Report Posted July 24, 2017 Check some of that scrap ABS from trimming out your parts. You can probably cut down/trim to the length/width of the cover strip you need for the bicep. Did you use E6000 or CA glue? I'd guess that you used the latter based on this post and needing a spare. If you used E6000 you will be able to separate it still and clean the glue off the spot. 1 Quote
Shanester[TK] Posted July 24, 2017 Report Posted July 24, 2017 I made support strips for the inside joints out of spare trimmed ABS and they were all fairly similar in width and length to my exterior strips. I'd try that before buying more because color could be an issue. Do make sure to remove the protective film. I made that mistake once... 1 Quote
Jesse12345 Posted July 24, 2017 Author Report Posted July 24, 2017 I removed the protective film and I used e6000 Quote
Jesse12345 Posted July 24, 2017 Author Report Posted July 24, 2017 Thanks For the scraps idea!!! Definitely works 1 Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.