Btabc[TK] Posted September 29, 2017 Author Report Posted September 29, 2017 Just now, ukswrath said: Almost there Bryce Yes sir I am!!! One step closer to being on the chopping block in front of you! Also, thank you for the help! Quote
illusionz_09[TK] Posted September 29, 2017 Report Posted September 29, 2017 Post the submission pictures. Maybe we can give you some feedback just in case the GML takes a while before getting back to you and wasting time in the meantime. Quote
Btabc[TK] Posted September 29, 2017 Author Report Posted September 29, 2017 Just now, illusionz_09 said: Post the submission pictures. Maybe we can give you some feedback just in case the GML takes a while before getting back to you and wasting time in the meantime. I'll be sure to! I just have to glue a few things (back cover strips) on the thighs and then I'll be good to send in as well as post here Quote
ukswrath[Staff] Posted September 29, 2017 Report Posted September 29, 2017 1 hour ago, Btabc said: Yes sir I am!!! One step closer to being on the chopping block in front of you! Also, thank you for the help! lol Quote
Haribon72[TK] Posted October 3, 2017 Report Posted October 3, 2017 And subscribed to this build thread! Quote
Btabc[TK] Posted October 3, 2017 Author Report Posted October 3, 2017 (edited) 12 hours ago, Haribon72 said: And subscribed to this build thread! Thank you very much!!!! 11 hours ago, ukswrath said: Welcome to the party Party hardy, my friends! Now a brief update: I have added the shims (with great thanks to @wingnut65 ) and have also started adding the abs paste! I will post pictures soon... unfortunately I'm at work so cannot upload pics here. However I added one layer, sanded down, but there were still a lot of imperfections. Added a second and third layer (slowly flaring outwards to blend the two halves together), sanded down and only have a few more spots to fill and blend. I have tried to add these with a stir stick (free from starbucks, but extremely fragile) so I went ahead and use a chop stick to stir. I must say... a lot more sturdy! I then used a popsicle stick to smear the ABS Paste on (thick) to sand it back down. Thanks to Jeff, again, I'm going to be polishing it out to make it a bit easier to paint/prime. I will be heading to my local hardware store either this weekend or this Friday to choose the correct paint and primer combo. I will post pictures of the process when I get home, hopefully if everything goes well Edited October 3, 2017 by Btabc 2 Quote
Btabc[TK] Posted October 4, 2017 Author Report Posted October 4, 2017 Just a quick update: Was unable to load photos last night because I got busy working on my thighs, but here they are I'll add more details to this late, but right now it's progression photos Left Thigh: http:// http:// http:// http:// http:// http:// Now the Right Thigh: http:// http:// http:// What I currently have... http:// still have a few more trouble spots to fix, but for the most part I'm GREATLY satisfied!!! The middle portion will be covered by a cover strip and I was given the "Ok" to use a 2". This'll greatly cover those trouble areas. I just have a little more sanding to do to blend the sides in and then it's time for spray paint!!!! And after that... *drum roll* SUBMISSION PHOTOS for basic approval.... again lol 1 Quote
wingnut65[Staff] Posted October 5, 2017 Report Posted October 5, 2017 Progress is looking good. Let me know if you want to have a sanding party to make those seams invisible. Quote
Btabc[TK] Posted October 10, 2017 Author Report Posted October 10, 2017 So just an update: I'm pleased to announce that I've been accepted! TK 28222!!!!!! Now time to move on up!!! On 10/5/2017 at 4:07 PM, wingnut65 said: Progress is looking good. Let me know if you want to have a sanding party to make those seams invisible. I will definitely be hitting you up with this soon! 1 Quote
ukswrath[Staff] Posted October 10, 2017 Report Posted October 10, 2017 26 minutes ago, Btabc said: So just an update: I'm pleased to announce that I've been accepted! TK 28222!!!!!! Now time to move on up!!! Congrats Quote
Btabc[TK] Posted October 10, 2017 Author Report Posted October 10, 2017 6 minutes ago, ukswrath said: Congrats Thank you, sir! Almost ready to start cleaning things up for EIB Quote
ukswrath[Staff] Posted October 10, 2017 Report Posted October 10, 2017 1 minute ago, Btabc said: Thank you, sir! Almost ready to start cleaning things up for EIB Looking forward to seeing your app 1 Quote
magni[TK] Posted October 10, 2017 Report Posted October 10, 2017 Congratulations on your approval Trooper! Quote
wingnut65[Staff] Posted October 10, 2017 Report Posted October 10, 2017 Congrats, Bryce! Now, lets get out there and make some smiles! Quote
FencingCorvetteTrooper[TK] Posted October 10, 2017 Report Posted October 10, 2017 Congrats and the Florida Garrison just keeps getting stronger! Quote
Btabc[TK] Posted October 10, 2017 Author Report Posted October 10, 2017 9 hours ago, magni said: Congratulations on your approval Trooper! Thank you very much! 9 hours ago, wingnut65 said: Congrats, Bryce! Now, lets get out there and make some smiles! Thank you, Jeff!!!!! Looking forward to this Saturday! 8 hours ago, FencingCorvetteTrooper said: Congrats and the Florida Garrison just keeps getting stronger! Yes it does! Quote
Btabc[TK] Posted October 16, 2017 Author Report Posted October 16, 2017 I should actually edit this thread... at the beginning I mentioned "fitting it to myself", but the way I was doing things was wrong. I had a few things that I have to fix after my first troop, but luckily they were a little easier. A few straps I had to "shorten" due to not being able to reach my helmet, but bringing my bicep pieces up a "smidge" alleviates this problem for me at least Now to start looking forward to EIB and Cent!!!!! And of course.... my jacket!!!!!!!!!!!!! Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.