Jump to content

Recommended Posts

Posted (edited)

Gentlemen,

 

Attached please find my Centurion application for my AM 2.0 / ANH Stunt Armor. All EIB modifications / recommendations were completed before applying for Centurion. 

 

Mandatory Information

EIB Suggestion Modifications:

 

1. Repainted left tear on helmet for "cleaner" appearance - Picture included

2. Belt raised 1/2" to overlap Ab Buttons - Picture included

3. Shoulder Bell corrected - found the elastic was holding it open, made the adjustment and it sits flush / even with the right SB.

 

Optional

  • Height = 6'2"
  • Weight = 183
  • Boots = TK Boots
  • Canvas belt = Tkittell / FISD Forums
  • Hand Plates = Latex - Justjoseph / FISD Forums
  • Electronics= Aker M2800 speaker / I-Comm is on order and on the way
  • Neck Seal = Darman / FISD Forums
  • Holster = Darman / FISD Forums

Full Body Front

 

20170223_190851_zpszrq1sxng.jpg

 

Full Body Rear

 

20170223_192152_zpsixp2dxro.jpg

 

Full Right / Arms Raised

 

20170223_191140_zpsfacruryf.jpg

 

Full Left / Arms Raised

 

20170223_191052_zpsebvawokp.jpg

 

Right Side Detail

 

20170218_160314_zpslmbj1zqa.jpg

 

Left Side Detail

 

20170227_192538_zps2mw0wcvi.jpg

 

Adjusted Belt Position / Per EIB Application

20170319_215410_zpsnkwdq8qx.jpg

 

Armor Details

 

Gloves

20170218_152422_zpsqvkypqbt.jpg

 

Shoulder Bridge Back

20170319_215016_zpsuvfvz7cg.jpg

 

Thigh Pack Attachment

20170223_183507_zpsushwit57.jpg

 

Thigh Pack Front

20170223_183524_zpsyiq4colj.jpg

 

Sniper Knee Front

20170320_183305_zpsfk1w6sj4.jpg

 

Sniper Knee Attachment Detail

20170320_183315_zpssjotaqwc.jpg

 

 

Forearm Return Edge Detail

20170218_153719_zpsmexellys.jpg

 

20170218_153649_zpscvdcs5eg.jpg

 

Drop Box Back

20170224_184346_zpsibrr8yrh.jpg

 

Crotch / Posterior Detail

20170218_152841_zpswqc2ndt5.jpg

 

 

Helmet Detail Photos

 

Front

20170218_163245_zpsft7dgg96.jpg

 

Rear

20170218_163221_zpswqqyq8vk.jpg

 

Right 

20170218_163136_zps6k4eqbfw.jpg

 

Left

20170319_212712_zps5ysniylo.jpg

 

Hovi Tip Detail

20170218_163332_zpsug1lvoiv.jpg

 

Backlit Visor & Frown Mesh Detail

20170218_152332_zpshiizo0kc.jpg

 

Helmet S-Trim

20170218_152554_zpsxejulysp.jpg

 

Accessory Details

 

Ammo Belt

20170223_192405_zps9qxpruco.jpg

 

Neck seal

20170223_183032_zps40j7esy6.jpg

 

Blaster Left Side

20170219_122324_zpspuwqmslf.jpg

 

Blaster Right Side

20170219_122422_zpsrrma52kv.jpg

 

Blaster Ejection Port Mod

20170220_205120_zps65r07j2j.jpg

 

Blaster D-Ring

20170219_122407_zpsbkq2wddz.jpg

 

TD Back

20170218_152447_zps62opybhk.jpg

 

TD Front - With 7 1/2" Measurement show

20170218_152511_zpswzgewmfw.jpg

 

TD Painted Screws

20170224_191300_zpswoxzda9c.jpg

 

Action Shot

 

20170223_191206_zpswicg2hkz.jpg

 

Optional

 

Interior Strapping

20170223_195044_zpsze6nsbws.jpg

 

20170223_195057_zpsw4hbw22z.jpg

 

20170223_195104_zpscuzcxfjw.jpg

 

Holster Attachment

20170223_192423_zpsnexmrjuy.jpg

 

AND....Bucket off...just to scare everyone to death!!! With a side note, this was while I was waiting on the replacement "Thigh ammo pack"...which, as seen above, is now properly attached! Hehe.

20170216_181730_zpsgvggl9hl.jpg

 

Here is the link to my build thread showing my detail on the build.

 

http://www.whitearmor.net/forum/topic/39748-jaltroopers-anh-stunt-tall-guy-newbie-am-20-build/

 

I am happy to answer any questions or provide any further detail as needed. 

 

Thanks to everyone for all the help and the encouragement during this build!

 

Many Thanks!

 

Jon

Edited by Jaltrooper
Posted

Looks great, Jon! Good luck!

Posted

SUPER nice job on your build, Jon!  You might want to see about replacing the white elastic that holds your shoulder bridges down in the back.  It looks a bit thin, and may not hold up too long.  If you like, I can send you enough of the 1/4 inch wide elastic to do both sides (no charge).  If interested, just PM me.  See you at at Centurion soon, brother!

Posted

I'll get that elastic replaced asap...I was thinking it was a tad thin! 

 

Thanks for the compliments everyone! Looking forward to it!

Posted
Hey Jon welcome back and thank you for your Centurion application.

CRL and Centurion Application Requirements:

All required photos have been submitted.Thank your for making the repairs suggested at EIB, very nice work    :jc_doublethumbup:  Your armor now contains all necessary elements to qualify you for Centurion. Andrew and I would like to congratulate and welcome you to the rank    :salute:. Excellent build job on your build and nice attention to details    :th_AnimatedBravoSmiley:  Another well deserved Centurion badge. 

 

Other-Armor Fit/Assembly:

Andrew and I know you put a lot of hard work into your build and we want you to know we notice it. As you know Centurion is the ultimate level, accuracy and looking your best is what Andrew and I are here to get every applicant to achieve if possible. If we had any suggestions to improve the overall look of your armor this is where we would mentioned it. That being said our only suggestion would be for you to maybe take another crack at your tears. I know we had you tidy up the left side, but now it's off compared to the right. If it makes it any easier you can purchase templates to assist you. In the meantime a huge congrats again, now head on out and make the Empire proud       :jc_doublethumbup:

  • Like 1
Posted (edited)

AWESOME!!!!!!!!!!!!!!!!!!!!!

 

Thanks so much guys!!! I, of course, will re-paint both, and will keep doing it till I get it right! I really wanted the "hand-painted look" as I have said, so, I'll try to cut back on the Mountain Dew long enough to keep my hands steady! Haha!

 

What a great honor, and I can say I am VERY appreciative to the following folks for helping me on this journey:

 

Tony (Ukswrath) for not only the great build threads and tutorials...but the patience of the numerous PM's during my build!

Joseph (Justjoseph63) - Same as above! When my BBB got here...I was prepared, and ready for my build thanks to Joseph!

Ryno Hawk - My "AM 2.0" run pal! He was very helpful and inspiring / encouraging

The Blooper Trooper - Great Young man! Was an inspiration to watch him and his Father work hard on his AM 2.0

Navajo Bro - great tutorial on AM Armor!

Cricket - Always volunteered help and tips when I needed them

My local pals - The Alabama Garrison...Tyler for his help getting me fitted...Patrick, Chris (BMTHChris on the FISD boards) Sparky, Roger, Bama Trooper, Blaster Disaster and Z-man who all encouraged and helped me along the way! 

There were so many more...if I have left you off, please forgive me...I am excited to be the #2 Centurion TK in the Alabama Garrison behind my buddy Chris!

 

I am a lucky guy to have had this help and will always make 100% sure I always "pay it forward" wherever I can!

 

I am very proud to be among this great group of guys and gals! 

 

Thank you everyone! 

 

See you out there on the troops!!!!

 

Jon

Edited by Jaltrooper
  • Like 2
Posted

Very nice! Congrats on joining the elite sir!

 

 

Sent from my iPhone using Tapatalk

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...