CrookKnight[TK] Posted March 6, 2017 Author Report Posted March 6, 2017 (edited) On 3/7/2017 at 1:59 AM, 68Brick said: Do you have a better pic of the helmet attachment? Here are 2 pictures. Since I only have 1 TK Bucket, I temporarily connect it using velcro. If you want to affix permanently, then you can glue it. Edited May 26, 2021 by gmrhodes13 photos updated gmrhodes13 2021 Quote
Daetrin[Admin] Posted March 6, 2017 Report Posted March 6, 2017 Email sent to LMO for feedback. Quote
CrookKnight[TK] Posted March 7, 2017 Author Report Posted March 7, 2017 (edited) I have decided to change the color of the vertical tanks. In lieu of flat gray, I am going with a Burnished Silver Iron. I think this matches better. See below: The flat gray is the one on the left. Edited May 26, 2021 by gmrhodes13 photos updated gmrhodes13 2021 Quote
CrookKnight[TK] Posted March 7, 2017 Author Report Posted March 7, 2017 Would you sell an unfinished/unassembled kit? Correction, the unfinished kit is $449, while the finished kit is $499. Quote
sylverbard[TK] Posted March 7, 2017 Report Posted March 7, 2017 Heres a question: what backplates will the pack fit over properly? Quote
CrookKnight[TK] Posted March 7, 2017 Author Report Posted March 7, 2017 Heres a question: what backplates will the pack fit over properly?All TK Back plates. Sent from my SM-G930P using Tapatalk Quote
Daetrin[Admin] Posted March 7, 2017 Report Posted March 7, 2017 Man, can't wait for the CRL approval. Time for me to sell a few more props I don't need, me likey! 2 Quote
ukswrath[Staff] Posted March 7, 2017 Report Posted March 7, 2017 Man, can't wait for the CRL approval. Time for me to sell a few more props I don't need, me likey! Just thinking the same thing 1 Quote
68Brick[TK] Posted March 7, 2017 Report Posted March 7, 2017 Is there a reason you left out the details on the horizontal cylinder end cap (Omega Symbol)? Quote
CrookKnight[TK] Posted March 7, 2017 Author Report Posted March 7, 2017 Is there a reason you left out the details on the horizontal cylinder end cap (Omega Symbol)? Is there a reason you left out the details on the horizontal cylinder end cap (Omega Symbol)?Y Yes. I did not want to copy every item from the Hot Toys figure. I was concerned with copyright infringement. I can make it a separate piece and make it an accessory. It is small and could easily be created. Quote
Daetrin[Admin] Posted March 12, 2017 Report Posted March 12, 2017 Hey Shawn - can you get detailed pictures of the pack at high resolution on a plain background, so the IPM team can PhotoShop them? The LMO is good for approving it, but we need good photos first. 1 Quote
CrookKnight[TK] Posted March 12, 2017 Author Report Posted March 12, 2017 Hey Shawn - can you get detailed pictures of the pack at high resolution on a plain background, so the IPM team can PhotoShop them? The LMO is good for approving it, but we need good photos first.Will do. Sent from my SM-G930P using Tapatalk Quote
CrookKnight[TK] Posted March 12, 2017 Author Report Posted March 12, 2017 Hey Shawn - can you get detailed pictures of the pack at high resolution on a plain background, so the IPM team can PhotoShop them? The LMO is good for approving it, but we need good photos first.Do I need to be wearing it? Or do they need pictures of it by itself? Sent from my SM-G930P using Tapatalk Quote
Daetrin[Admin] Posted March 12, 2017 Report Posted March 12, 2017 By itself. If you look at the CRL, you can see what accessory pictures look like. Probably 3-4 from different angles should be good. 1 Quote
CrookKnight[TK] Posted March 13, 2017 Author Report Posted March 13, 2017 (edited) On 3/13/2017 at 3:06 AM, Daetrin said: By itself. If you look at the CRL, you can see what accessory pictures look like. Probably 3-4 from different angles should be good. Ok Here you go. I took a bunch of different ones with different backgrounds. It looks like it is Black / White, but it is just due to the background I used. If you need something different, let me know. Edited May 26, 2021 by gmrhodes13 photos updated gmrhodes13 2021 Quote
allan1313[TK] Posted March 13, 2017 Report Posted March 13, 2017 That is very cool. Nice job Shawn! Sent from my Nexus 6P using Tapatalk 1 Quote
Daetrin[Admin] Posted March 13, 2017 Report Posted March 13, 2017 They've been submitted for processing by the LMO team... 1 Quote
CrookKnight[TK] Posted March 13, 2017 Author Report Posted March 13, 2017 They've been submitted for processing by the LMO team... Cool. Since I am new to this entire process, what happens after it is processed by the LMO Team? Quote
Daetrin[Admin] Posted March 13, 2017 Report Posted March 13, 2017 If this were a new request they would evaluate the request and based on the proposed text & photographic evidence respond with a determination of approval/rejection with comments. Since I've already obtained approval on the text & photos, what happens now is that the LMO photoshop team - similar to our IPM - will edit the photos to comply with CRL standards, and the LMO will get the text/photos added to the CRL and let us know when it is published. So, for now we wait until we hear that its live. Make sense? 1 Quote
CrookKnight[TK] Posted March 13, 2017 Author Report Posted March 13, 2017 If this were a new request they would evaluate the request and based on the proposed text & photographic evidence respond with a determination of approval/rejection with comments. Since I've already obtained approval on the text & photos, what happens now is that the LMO photoshop team - similar to our IPM - will edit the photos to comply with CRL standards, and the LMO will get the text/photos added to the CRL and let us know when it is published. So, for now we wait until we hear that its live. Make sense? Yes. Thank you for clarifying the process. Sent from my SM-G930P using Tapatalk Quote
CrookKnight[TK] Posted April 5, 2017 Author Report Posted April 5, 2017 (edited) The pictures for the CRL have been photoshoped. Below are 3 of them. We are very close to this being an approved accessory for the Stormtrooper. Also pictured below is the level 2 version I am currently building for someone and it will be at Celebration. ------------- Edited May 26, 2021 by gmrhodes13 link not working, removed gmrhodes13 2021 1 Quote
Daetrin[Admin] Posted April 5, 2017 Report Posted April 5, 2017 Wow! You take something great and make it even better. Some lucky dude will be sporting this at Celebration? I hope to buy him a beer. And, I will push all I can to get this in the CRL as C8, even if I have to play the LMO with mass amounts of liquor to do so. 1 Quote
mattnelson521[501st] Posted April 5, 2017 Report Posted April 5, 2017 Wow the pic came out pretty good. I should make my first official 501st armor with this one. Quote
CrookKnight[TK] Posted April 5, 2017 Author Report Posted April 5, 2017 Wow the pic came out pretty good. I should make my first official 501st armor with this one.You should. I will be printing yours next. Just ordered a second 3D printer. Sent from my SM-G930P using Tapatalk Quote
CrookKnight[TK] Posted April 5, 2017 Author Report Posted April 5, 2017 Wow! You take something great and make it even better. Some lucky dude will be sporting this at Celebration? I hope to buy him a beer. And, I will push all I can to get this in the CRL as C8, even if I have to play the LMO with mass amounts of liquor to do so.Gee. I wonder who that lucky person is? Sent from my SM-G930P using Tapatalk Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.